Nihon Kohden GZ 1XXP User Manual

User Manual

Since this module is not sold to general end users directly, there is no user manual of
module.

For the details about this module, please refer to the specification sheet of module.

About professional installation, please refer to “02 FCC Declaration of Professional Installation”.
To show the installation to the limited host product, please refer to “08 (Confidential)Theory of
Operation_host device specification.pdf”. For the representative host product, please refer to “08
(Confidential)Theory of Operation_host device specification”.

Based on the above conditions, the statements for RF Exposure will be indicated as follows;

“This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio frequency (RF) Exposure

Guidelines. This equipment has very low levels of RF energy that are deemed to

comply without testing of specific absorption ratio (SAR).”

The following information must be indicated on the host device of this module;

[for FCC]

Contains Transmitter Module FCC ID: B6BGZ-1XXP

or

Contains FCC ID: B6BGZ-1XXP

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

*If it is difficult to describe this statement on the host product due to the size, please describe in
the User's manual.

[for IC]

Contains Transmitter Module IC: 4704A-GZ1XXP

or

Contains IC: 4704A-GZ1XXP