Page 1
Reference
2x3 screws for the
stand assembly
NEC PLASMA TABLE TOP STAND
Step 3.
Carefully place the
NEC Plasma on a
flat soft surface
Step 4.
Remove the screws
with the cross point
screwdriver
Step 5.
Slide the support
brackets into the
base
Step 6.
Secure the stand
with the six screws
Step 7.
With assistance,
carry the entire unit
to the desired
location and divert
the protective foil
from the stand
Step 1.
Open packaging
Step 2.
Put stand on a table
CONTENTS:
- NEC Table Top Stand
REQUIRED TOOLS:
- Six crosshead screws (Please unscrew from NEC Plasma, see “reference”)
- Cross point screwdriver
INSTRUCTIONS
2951-4042-C001 Rev.00
Loading...