Maximum Overview User Manual

MASTS AND BRACKETS

58”

MAST

SECTIONS

NOW AVAILABLE FROM MAXIMUM

MAST SECTIONS

Masts are available in Type 304, mill finish
stainless steel or triple coated galvanized steel.
Masts will arrive as two 58” long, 1.25” O.D.
sections that join together to make a single
9’ 4” mast. These masts are ideally suited
for use with all Maximum, Inc. wind instruments.

4 INCH WALL MOUNT

The 4 inch wall bracket mounting assembly will
handle obstructions of up to 4 inches that may
be in the way of the sensor mast (such as roof
overhang).

8 INCH WALL MOUNT

SWAGED END

4”

The 8 inch wall bracket mounting assembly will

”8

handle obstructions of up to 8 inches that may
be in the way of the sensor mast (such as roof
overhang).

18 INCH WALL MOUNT

The 18 inch wall bracket mounting assembly will
handle obstructions of up to 18 inches that may
be in the way of the sensor mast (such as roof
overhang). Includes third leg on bottom bracket
for added support.

18”

CHIMNEY MOUNT

The hardware includes 18 feet of stainless steel
strap to handle most any size chimney. The

”4

brackets will provide clearance for an overhanging
chimney cap, or other obstruction up to 4”.

ADJUSTABLE EAVE MOUNT

Lower bracket adjusts from 45” to 60” to
accommodate most any roof pitch.

BRACKET

HALF

BRACKET

HALF

30 Samuel Barnet Blvd.

New Bedford, MA 02745

[phone]