The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at
your selected destinations. When using the Magellan RoadMate receiver, these safety rules must
be followed to prevent accidents that can result in injury or death to yourself or others:
Please check the applicable regulations in your state regarding windshield mounting. Certain
states prohibit the mounting of any items on your windshield. Go to www.magellanGPS.com for
alternative mounting solutions.
When driving, the need to view the display is minimal. Voice prompts will guide you to your
destination. The driver should enter data or program the Magellan RoadMate receiver only when
the vehicle is stationary. Only a vehicle passenger should enter data or program the Magellan
RoadMate receiver while the vehicle is moving. Do not become distracted by the receiver while
driving, and always be fully aware of all driving conditions.
It is your responsibility to comply with all traffic laws and to use the Magellan RoadMate and
mounting options in such a manner that the user is in compliance with applicable laws.
Roads, points of interest (POIs), business and service locations may change over time. As a result
the database may contain inaccuracy. Also, the database does not include, analyze, process,
consider, or reflect any of the following: legal restrictions (such as vehicle type, weight, height,
width, load and speed restrictions); road slope or gradient; bridge height, width, weight or other
limits; population density; neighborhood quality or safety; availability or proximity of police,
emergency rescue, medical or other assistance; construction work zones or hazards; road or
lane closures; road, traffic or traffic facilities’ safety or condition; weather conditions; pavement
characteristics or conditions; special events; traffic congestion. It is your responsibility to disregard
any unsafe, hazardous or illegal route suggestions.
Keep the Magellan RoadMate receiver safe from extreme temperature conditions. For example, do
not leave it exposed to direct sunlight for an extended period of time.
Take care when mounting the Magellan RoadMate receiver in your vehicle, whether using the
windshield mount or other mounts, that it does not obstruct the driver’s view of the road, interfere
with the operation of the vehicle’s safety devices such as air bags, or present a hazard to occupants
of the vehicle should the receiver be dislodged while driving. It is your responsibility to assess the
risks associated with damage to your vehicle or vehicle occupants as the result of your choices in
mounting the Magellan RoadMate receiver.
Temperature
The maximum operating temperature is 140°F (60°C).
Battery
The battery in the Magellan RoadMate receiver is rechargeable and should not be removed. In the
event that it should need to be replaced, please contact Magellan Technical Support.
Charging the Magellan RoadMate
An optional AC adapter is available as an accessory for your Magellan RoadMate . Use of another
type of AC adapter can result in malfunction and/or possible fire hazard due to battery overheating.
Only use the car charger approved for/supplied with your Magellan RoadMate receiver. Use of
another type of car charger will result in fire or electric shock.
RM9416 User Manual ii
For safety reasons, the battery in your Magellan RoadMate receiver will stop charging when the
9416
ambient temperature is less than 32°F (0°C) or more than 113°F (45°C).
It will take approximately 4 hours of charging the Magellan RoadMate receiver through the vehicle
power adapter or optional AC adapter to obtain a full battery charge. It is recommended that you
charge the battery initially for at least 2 hours.
Use only the charger approved for your Magellan RoadMate receiver.
Estimated usage of the Magellan RoadMate on battery power is approximately 30 minutes.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for class B digital devices,
in accordance with part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Magellan RoadMate
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Tested To Comply
With FCC Standards
Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation
FOR HOME OR OFFICE USE
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made
to the equipment without the approval of manufacturer could void the user’s authority to operate
this equipment.
RM9416 User Manual iii
The Magellan RoadMate receiver must be installed and operated at a distance no closer then 8
inches (20 cm) from the user.
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
IC statement
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits established for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
The information provided in this document is subject to change without notice. Improvements
and enhancements to the product may occur without any formal notification. Check the
Magellan website for product updates and additional information.
All other trademarks and registered trademarks are property of their respective owners.
The information provided in this document are correct at the time that it is created.
MiTAC International Corporation assumes no responsibility or liability for any errors or
inaccuracies that may appear in the contents of this User Manual.
112-0083-001 A
RM9416 User Manual iv
Contents
IMPORTANT SAFETY WARNINGS ii
Contents v
1 Magellan Roadmate GPS Receiver 1
Magellan Roadmate Controls and features ....................................................................2
Setting the GPS Position ..................................................................................... 26
Viewing the GPS Status .......................................................................................26
Bluetooth ....................................................................................................................... 26
Default System Settings ................................................................................................26
Restoring All Default System Settings ...............................................................26
Product Information ......................................................................................................26
Viewing Product Information .............................................................................. 26
In Case of Trouble ...............................................................................................27
RM9416 User Manual Page viii
This user manual will give you the necessary
information on how to use the various features of the
Magellan RoadMate Commercial receiver.
Visit us at magellanGPS.com/support
Connect with us
@MagellanGPS
MiTAC Digital Corporation
471 El Camino Real, Santa Clara, CA 95050 USA
www.magellanGPS.com
1 Magellan Roadmate GPS Receiver
The Magellan® RoadMate® receiver is a vehicle
navigation product.
It uses GPS signals from satellites to calculate
your precise location and compute navigational
information.
The RoadMate uses its position and movement
to overlay this information on detailed maps
to provide a visual representation of your
location.
With the Magellan Roadmate receiver you can:
• Save searches and addresses under the
OneTouch™ menu for fast, convenient
access to favorite destinations and
searches.
• Store your home address so you can quickly
get routing details from wherever you are to
your home.
• Enter and save addresses in your address
book that can be accessed at any time and
get routing information to that address.*
The user interface for the Magellan Roadmate
receiver is intended to be easy and simple to
follow.
The Magellan Roadmate receiver has a builtin battery. Note that a fully charged Magellan
Roadmate with 7” screen only has about 30
minutes of battery life. If you need or wish to
use external power, you can use an optional AC
power adapter.
While the Magellan Roadmate has a powerful
GPS chipset, you may not get strong enough
satellite signals to compute your location
when indoors or in a parking garage. If you
find you are not getting strong enough satellite
signals while in a garage or other structure,
move to a location where there is a clear view
of the sky and you should immediately see an
improvement in signal strength.
The Magellan Roadmate receiver includes
Voice Alerts (both prerecorded and Text-toSpeech) for driving instructions.
• Route to an address that you enter using
the QuickSpell™ and Smart City search for
easy, errorless address entry.
• Route to any point of interest (POI) that
has been preloaded into your Magellan
Roadmate receiver.
• Create a route with multiple destinations.
Handy for business people who need
routing information to many destinations.
• View POIs that are near exits ahead of
you on the highway. The Highway Exit
POIs function provides you with a list of
gas stations, restaurants, hotels and auto
repair shops located nearby exits you
are approaching while travelling on the
interstate.
• Save location information to create a map
later of the places you went.
• Customize your Magellan Roadmate
receiver to meet your needs using the
Settings menu.
Need Technical Support?
If you need technical support for your Magellan receiver
you should first go to www.magellangps.com/support for
answers to most questions.
If you can’t find a solution there, you can contact Magellan
Technical Support directly by e-mail at
support.us@cs.magellangps.com or call 800-707-9971.
Magellan Take-Back Program
Magellan’s Take-Back Program provides
a way for consumers to recycle certain
Magellan equipment. As part of this program,
all Magellan GPS models will be accepted.
Visit magellanGPS.com for more information.
RM9416 User Manual Page 1
Magellan Roadmate Controls and features
A
B
Magellan
Power buttonPress and hold to turn the device on or to completely shut down.
A
Press momentarily to suspend or resume the device.
MicroSD card slotStorage for optionally purchased maps.
B
Audio OutConnect optional headphones or external audio.
C
Micro USB connectorConnect to power source* or personal computer**
D
AV Input3.5mm AV In. Connect audio/visual display from optional Magellan
E
Backup Camera.
CDE
* Power input from vehicle power adapter cable or optional AC power adapter.
** Connect your receiver to a personal computer to update maps and software using the
Magellan Content Manager application. Versions are available for Mac and Windows PCs. You can
download it from:
www.magellangps.com/ContentManager
RM9416 User Manual Page 2
2 Fundamentals
Battery Levels
The Magellan RoadMate receiver has an
internal battery that is charging whenever the
receiver is connected to external power1.
Note: The battery can only be serviced by
authorized Magellan repair facilities.
Viewing the Battery Level Indicator
1. While viewing the Map screen, tap on the
Menu button in the right corner.
2. The battery level indicator is located in
the upper right corner of the Main Menu,
just below the satellite signal indicator.
Green bars indicate battery level.
Speaker Volume
Changing the Volume from the Map Screen
1. Tap the speaker icon . Additional controls
appear.
2. Tap the speaker button to mute the
volume, or tap the ‘+’ or ‘-’ buttons to
raise or lower the volume.
3. Tap .
Changing the Volume from Settings
1. Access the Main Menu.
2. Tap the Settings icon .
3. Tap Sound.
4. Tap the top or bottom of the Master
volume adjust bar or drag the slider
button to change the volume level of the
Magellan RoadMate receiver.
5. Tap to save and return to the
Settings screen.
Setting Button Sounds On or Off
1. Access the Main Menu.
2. Tap the Settings icon .
3. Tap Sound.
4. Tap the check box for Button Sounds.
Check to have button sounds played,
unchecked to turn them off.
Setting Smart Volume On or Off
Smart Volume is a feature of the receiver that
changes the volume automatically as your
speed changes, compensating for road noise.
1. Access the Main Menu.
2. Tap the Settings icon .
3. Tap Sound.
4. Tap the check box for Smart Volume.
1 When the device is very cold or very hot, the battery will
not charge.
RM9416 User Manual Page 3
When checked, Smart Volume is on.
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.