Ultrathin Touch Mouse T631 for Mac® Souris tactile ultra-fine T631 pour Mac®
Setup Guide
Guide d’installation
Bluetooth wireless technology / Technologie sans fil Bluetooth
English . . . . . . . . . . . . . . . . . 3
Français. . . . . . . . . . . . . . . . 10
Español . . . . . . . . . . . . . . . . 17
Português . . . . . . . . . . . . . . 24
www.logitech.com/support. . . 31
2
Get to know your mouse
Bluetooth |
|
On/Off switch |
|
||
Connect |
|
|
button |
|
|
O 
On
1
2
Connect
Bluetooth |
|
Easy Switch |
Micro-USB port |
Touch surface
Status light
Micro-USB charging cable
English 3
Set up Bluetooth
On your mouse
1. Power on |
|
|
Slide the switch |
|
|
to the On |
|
|
position. |
O |
On |
|
||
2. Select Bluetooth |
|
|
channel |
O |
On |
|
||
Slide the Bluetooth |
|
|
Easy Switch to |
|
|
position 1 or 2. |
1 |
2 |
|
||
3. Press Connect |
|
|
The status light |
|
|
blinks blue rapidly |
|
|
to indicate the |
|
1 |
mouse is ready |
|
|
for pairing with |
|
Connect |
a Mac. |
|
|
The status light blinks while the mouse is discoverable—
about three minutes.
4 English
Set up Bluetooth
On your Mac
After confirming that Bluetooth is on, go to System Preferences > Bluetooth and click 
to open the Bluetooth Setup Assistant.
When Ultrathin Touch Mouse appears in the device list, select it and click Continue.
Follow the on-screen instructions.
When pairing is complete,
the status light on the mouse lights steadily blue for 30 seconds.
Install software 
Experience all your mouse has to offer. Install Logitech software to enjoy smoother performance, personalize settings, and add gestures. Download the software from:
www.logitech.com/support/t631
English 5
Pair with another Mac
To use your mouse with another Mac, pair with it using the remaining channel.
Slide the Bluetooth Easy Switch to the other, unused channel and press Connect.
Repeat the instructions in “Set up Bluetooth.”
Now you can switch between Macs by selecting the Bluetooth channel you used to pair it with the mouse.
Support
Visit the product page
While online, check out Product Page, your destination for worldclass support.
Here you’ll find tutorials, guidelines and troubleshooting tips for your Ultrathin Touch Mouse for Mac.
Product page is also home
to lively forums that connect you to a community of active users.
www.logitech.com/support/t631
6 English
Gestures
Clicking (one finger)
Click. Press the left side of the touch surface.
Right-click. Press the right side of the touch surface.
Lift the nonclicking finger completely off the surface.
Scroll. Swipe up, down, or sideways.
English 7
Charge the battery
Use the charging cable to connect the Touch Mouse to your computer or a USB power adapter. The status light blinks green while the mouse is charging.
Charge your mouse until the status light stops blinking. (A blinking red light means it’s time to recharge.)
Each minute of charging gives you about an hour of use.*
*This ratio is approximate and based on standard user experience. Your results may vary.
8 English
Troubleshooting
Mouse not working?
•On your Mac, confirm Bluetooth is turned on.
•Slide the On/Off switch to Off, then back to On.
•If the status light flashes red, recharge the battery.
(See “Charge the battery.”)
•Confirm that the selected
Bluetooth channel (1 or 2) is the same channel you used to initially pair the mouse with your Mac.
•Restart your Mac.
•Check the Bluetooth settings on your Mac to see if “Ultrathin Touch Mouse” is listed.
If so, remove it from the list and repeat the steps for pairing in “Set up Bluetooth.”
www.logitech.com/support/t631
What do you think?
Please take a minute to tell us. Thank you for purchasing
our product. www.logitech.com/iThink
English 9
Présentation de votre souris
Bluetooth |
|
Commutateur |
|
||
Bouton de |
|
Marche/Arrêt |
connexion |
|
|
O 
On
1
2
Connect
Bluetooth |
|
Easy-Switch |
Port micro-USB |
|
Surface tactile
Témoin d'état
Câble de charge micro-USB
10 Français
Loading...