Liebherr MF-1851 Specification Sheet

MF 1851

Features & Benefi ts

SuperQui

sound absorbing comp

In

h & swipe

sc

In

including a so

Super

sealing in

W

Full 2-Year Warranty, full 5 -Year Warranty in the Sealed System and limited 6 -12 Year Warranty.

18" Monolith Freezer - Fully Integrated, panel ready

18"

et: Noise levels are kept to a minimum thanks to virtually silent, speed-controlled, and

ressors.

finitySwipe: Intuitive electronic touch-control panel features a full-color 3.5-inch touc
reen that allows you to control every function.

finityLight: Casts beautiful and even side lighting that can tuned according to personal taste,

ft brightening effect upon opening the doors.

Frost: Quick freeze just-bought groceries to preserve optimum food freshness, while

flavors and maintaining essential vitamins and minerals.

arranty terms

Product dimensions

Cut out dimensions

Available Accessories

Accessories for Side-by-Side installation

s

Product Dimensions

(72 - 106 mm)

18"

IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.

Height can be increased by a maximum of

When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.

Cut out Dimensions

Continuous Toe Kick

18"

(457 mm)

E1

(76 mm)

/16" - 4 /16"

13 3

2

D D

3"

A

3"
(76 mm)

84"

(2134 mm)

B

E2

C

4"
(102 mm)

Door Panel Dimensions

and dimensions of free length for power

18" recess

W

Inset installation style
H = 79 7/8" (2029 mm)
W = 17 3/4" (451 mm)

Individual Toe Kick

18"

(457 mm)

E1

(76 mm)

3"

D D

A

E2

3"
(76 mm)

(2134 mm)

B

C

Inset

A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 19 7/8" (505 mm)

.teef elba tsujda eht gninrut yb )mm 62( "1

Frameless

A = 8 1/2" (216 mm)
B = 1/2" (12.5 mm)
C = 20 3/8" (517 mm)

Dimension A = without
mounted door handle

A
Cabinet depth frameless installation style = 25" (635 mm)
Cabinet depth inset installation style = 25" (635 mm) +
panel thickness

B
This is the point where the power cord exits from the
appliance rear. 3/4" (19 mm) from the left and 5"
(127 mm) from the floor. Free length of the power cord
is 98" (2.5 m). We recommend power outlet to be placed
outside of the appliance opening.

A 15 or 20 A,

110-120 VAC circuit grounded and protected by a circuit

84"

breaker or fuse is required.

C
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height

over the whole width of the appliance.
The water pressure must be in the range of 40 - 90 psi.
A shut-off valve must be installed between the water line

annd the main water supply. It must be easily accessible so

the water supply can be stopped immediately if necessary.

D
This surface is visible when the appliance door is open.
Designed finish is required.

E1, E2

Depending on the appliance, the anti-tipping bracket is
positioned at the top (E1) or base (E2) of the appliance
and must be secured to the wall or to the floor, please
refer to the installation manual for more information.

Frameless installation style

H

H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 18" (457 mm) Add overlapping
dimension to the panel on both sides.

8.8 ft (2400 mm)

~

6.5 ft (2000 mm)

~

Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm)
Panel and handle weight: Max. 55 lbs. (25 kg)

* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.

home.liebherr.com/monolith

C

Specifi cations are for planning purposes only. For more detailed information refer to installation instructions or Design Guide.

Subject to modifi cation. For up-to-date information, visit home.liebherr.com/monolith.