Mobile crane |
LTC 1045-3.1 |
|
|
|
|
|
Max. capacity: |
45 t |
|
Max. lifting height: 48 m |
|
|
Max. radius: |
39 m |
Mobile crane LTC 1045-3.1
Compact and universally employable
2 LTC 1045-3.1
A long telescopic boom, high capacities, compact dimensions, an extraordinary manoeuvrability and mobility as well as a comprehensive comfort and safety equipment distinguish the mobile crane LTC 1045-3.1 from Liebherr. The 45-ton crane offers state of the art technology for more benefit in practical operation.
•36 m long telescopic boom with outstanding high telescopable capacities
•36 t total weight incl. 6.5 t ballast and swing-away jib at 12 t axle load
•ZF-power shift gearbox with automatic shifting and torque converter
•Telescopable cab offers best visibility at road driving and at crane operation as well as steering capabilities of a 2-cab crane
•Integrated and easily detachable storage box at the vehicle front
LTC 1045-3.1 3
Drive train
•6-cylinder Mercedes-Benz diesel engine, 240 kW/326 HP at 2200 rpm, max. torque 1300 Nm at 1200 rpm
•Power shift gearbox with automatic shifting ZF 6 WG 210, 6 forward and 2 reverse gears
•Torque converter and lock-up clutch
•Axles 1 and 3 driven, optional axle 2
4 LTC 1045-3.1
Most modern chassis and drive technology
High mobility and economy
A powerful 6-cylinder turbo-diesel engine with 240 kW/326 HP provides for fast driving performance. The ZF-power shift gearbox with automatic shifting offers best manoeuvrability and high comfort.
•Minimum crawling speed due to torque converter
•ABV-automatic locking preventer
•Telma Eddy currant brake optional, wear free and comfortable
Compact, manoeuvrable and weight optimized
Due to its extremely compact dimensions the LTC 1045-3.1 can also move on the tightest job sites. At especially crowded conditions on-site the boom can be luffed up so that the turning radius of the chassis is the decisive factor. By removing the front storage box the vehicle length can be further reduced.
•Chassis length only 8.91 m, after removing of the front storage box only 7.68 m
•Minimum turning radius only 6.10 m
•Chassis width only 2.54 m, also with tyres 445/95 R 25 (16.00 R 25)
•Lowest vehicle height only 3.01 m
•Tail swing only 3.20 m
R=6100
R=7490
R=2460
Hydropneumatic axle suspension |
|
Pneumatically activated disk brakes |
|
||
“Niveaumatik” |
|
•High braking power, better brake control |
•Maintenance free suspension cylin- |
|
|
|
•Improved track stability |
|
der |
|
|
|
•No fading of the brake performance at high |
|
•Large dimensioning for high axle |
|
|
|
brake temperatures |
|
loads |
|
|
|
•Higher operational life |
|
•Spring travel +100/-100 mm |
|
|
|
•Shorter working time for replacement of the |
|
•High side stability at driving around |
|
|
|
brake pads |
|
curves |
|
|
|
•Brake pads with wear indicators |
|
•Choosing of the driving modes by |
|
|
|
|
|
fixed programmes |
|
|
|
|
|
|
|
|
|
|
|
LTC 1045-3.1 5
Roomy storage boxes
Numerous storage boxes for extensive accessories, lifting tackle and support timber
LTC 1045-3.1 6