E2(MK.CZ)_FA162_ENG_MFL36264631
MICRO Hi-Fi SYSTEM
OWNER’S MANUAL
MODEL: FA162
FA162-A0U/D0U/X0U
FAS162F
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
USB
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.
The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
This product is manufactured to comply with the EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 2006/95/EC.
POWER SAVE MODE
You can set up the unit into an economic power save mode.
In power-on status, press and hold 1(POWER) button for about 3 seconds.
-Nothing is displayed in the display window when the unit goes into the power save mode.
To cancel power save mode, press 1(POWER).
2
Before use
Contents
Before use
About the Symbols for instruction /
Notes on Discs . . . . . . . . . . . . . . . . . . . . .3 Front / Back Panel . . . . . . . . . . . . . . . . . .4
Remote Control . . . . . . . . . . . . . . . . . . . . .5
Connections
Speaker System Connection /
Auxiliary Function . . . . . . . . . . . . . . . . . . .6 Antenna (Aerial) Connections . . . . . . . . . .7
Operation
USB Function . . . . . . . . . . . . . . . . . . . . . . .7 Setting the Clock / Timer Function /
Sleep Timer Function . . . . . . . . . . . . . . . .8 Audio Adjustment . . . . . . . . . . . . . . . . . . .9
Presetting the Radio Stations /
Listening to the Radio . . . . . . . . . . . . . . .10
RDS Function - OPTIONAL . . . . . . . . . . .11
CD Playback . . . . . . . . . . . . . . . . . . . . . .12 To Program Play /
About MP3/WMA . . . . . . . . . . . . . . . . . .13
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . .14
Specifications . . . . . . . . . . . . . . . . . . . . .15
The manual largely contains detailed explanation items about how to operate the unit with the remote control.
Precautions in using the touch buttons
•Use the touch buttons with clean and dry hands.
-In a humid environment, wipe out any moisture on the touch buttons before using.
•Do not press the touch buttons hard to make it work.
-If you apply too much strength, it can damage the sensor of the touch buttons.
•Touch the button that you want to work in order to operate the function correctly.
•Be careful not to have any conductive material such as metallic object on the touch buttons, and it can cause malfunctions.
About the symbols for instruction
Indicates hazards likely to cause harm to the unit itself or other material damage.
Note Indicatesfeatures. special notes and operating
Notes on Discs
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
Before use
3
Front / Back Panel
|
|
19 |
1 |
12 |
|
2 |
13 |
|
3 |
14 |
20 |
|
|
|
4 |
15 |
22 |
|
||
5 |
16 |
21 |
6 |
|
|
7 |
|
|
|
OPEN |
|
8 |
17 |
|
9 |
18 |
|
10 |
|
|
|
|
|
11 |
|
|
1.1 (POWER)
2.VOLUME*
3.FUNC. (FUNCTION)
(FM, AM, CD, USB, AUX)
4. .(SKIP)
TUN. (-) (TUNER)
5.XTS pro
6.x (STOP)
MO./ ST. (MONO/ STEREO)
7.DISC TRAY
8.EQ master/ DEMO button
9.CLOCK button
. TIMER button
. SET/ RDS(OPTIONAL) button
. Display window
. B/[] (PLAY/PAUSE)
. XDSS plus/ (MP3 Optimizer)
15.> (SKIP)
TUN. (+) (TUNER)
16.Z (OPEN/CLOSE)
17.
USB connector
18.PHONES
(Headphone jack : 
3.5mm)
19.Power cord
20.Antenna terminal
21.AUX IN (Auxiliary input) connector
22.Speaker terminal
*VOLUME Adjustment
Move your finger around the touch wheel.
4
Remote Control
|
DIMMER button |
DISP.MODE (DISPLAY MODE) button |
MUTE button |
|
|
POWER button |
• USB button |
|
• FUNCTION button |
PRESET/ FOLDER (
) buttons 
VOLUME CONTROL(
) buttons
SLEEP button |
CLOCK button |
|
PLAY/PAUSE (B/[]) button • |
|
|
STOP (x)/ MO./ST. button • |
|
|
SKIP/ SEARCH • |
PROGRAM/ MEMO button |
|
(.bb/ BB>) buttons |
||
|
||
TUN. (-/+) buttons • |
D.SKIP button |
|
REPEAT button • |
• EQ master button |
|
RDS (Radio Data System) FUNCTION |
||
• XDSS plus button |
||
buttons |
||
• XTS Pro button |
||
RDS button : OPTIONAL • |
||
• RANDOM button |
||
PTY button : OPTIONAL • |
||
|
||
PTY SEARCH button : OPTIONAL • |
MP3 Info button |
|
NUMERIC buttons |
(MP3/ WMA file information display) |
|
|
Remote Control battery installation
|
|
Detach the battery cover |
|
|
on the rear of the remote |
|
|
control and insert two R03 |
AAA |
AAA |
(size AAA) batteries with |
|
|
3 and # aligned correctly. |
3#
Caution
:Do not mix old and new batteries. Never mix different types of batteries (standard,
alkaline, etc.).
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons.
• Distance : About 23 ft (7 m) from the front of the remote sensor.
• Angle : About 30° in each direction of the front of the remote sensor.
Before use
5
Loading...