LG BP740 User Manual

OWNER’S MANUAL

Network 3D Blu-ray Disc™ / DVD Player

Please read this manual carefully before operating your set and retain it for future reference.

BP740

P/NO : MFL68164531_1.0

www.lg.com

Safety Information

Getting Started 3

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous

enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

voltage within the product’s

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre. Use of controls, adjustments or the performance of procedures other than those specied herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Getting Started

Getting Started4

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the equipment: Remove the

old battery or battery pack, follow the steps

Getting Started

in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, shall be placed on the apparatus.

yThe appliance is not intended for use by

young children or inrm persons without supervision.

yYoung Children should be supervised to

ensure that they do not play with appliance.

yIf the appliance is supplied from a cord

extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

Notes on Copyrights

yBecause AACS (Advanced Access Content

System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.

yFurthermore, BD-ROM Mark and BD+ are

additionally used as content protection systems for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact an authorized Customer Service Centre.

yMany BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.

yThis product incorporates copyright protection

technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.

yUnder the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability.

Important Notice for TV colour system

The colour system of this player diers according to currently playing discs.

For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.

Only the multi system colour TV can receive all signals output from the player.

yIf you have a PAL colour system TV, you will see

just distorted images when using discs or video contents recorded in NTSC.

yThe multi system colour TV changes the colour

system automatically according to input signals. In case that the colour system is not changed automatically, turn it o and then on to see normal images on screen.

yEven if the disc recorded in NTSC colour system

are well displayed on your TV, these may not be recorded correctly on your recorder.

Getting Started 5

Caution

yWatching a 3D content for a long period

time may cause dizziness or tiredness.

yIt is not recommended to watch a movie

in 3D mode for inrm, child and pregnant woman.

yIf you are experiencing headache, tiredness

or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal.

Getting Started

Table of Contents6

Table of Contents

1 Getting Started

3 Safety Information 8 Introduction 8 – Playable Discs and symbols used in

this manual

9 – About the “7” Symbol Display 9 – Regional Code 9 – System Select 10 Remote Control 11 – Magic remote control functions 12 Front Panel 12 Rear Panel

2 Connecting

13 Connecting to Your TV 14 – What is SIMPLINK? 14 – Resolution Setting 15 Connecting to an Amplifier 15 – Connecting to an Amplifier via HDMI

Output

16 – Connecting to an Amplifier via Digital

Audio Output 17 Connecting to your Home Network 17 – Wired network connection 18 – Wired Network Setup 19 – Wireless network connection 19 – Wireless network setup

3 System Setting

22 Initial Setup 23 Settings 23 – Adjust the Setup Settings 23 – [NETWORK] Menu 25 – [DISPLAY] Menu 27 – [LANGUAGE] Menu 27 – [AUDIO] Menu 29 – [LOCK] Menu 30 – [OTHERS] Menu

4 Operating

32 Home Menu Display 32 – Using [HOME] menu 32 – Using the SmartShare 33 Playing the Linked Devices 33 – Playing a Disc 33 – Playing Blu-ray 3D disc 34 – Playing a file on disc/USB device 35 – Playing a file on Android device 36 – Playing a file on a network server 37 Using Home Network Server for PC 37 – About SmartShare PC Software

(DLNA)

37 – Downloading SmartShare PC

Software (DLNA)

37 – Installing SmartShare PC Software

(DLNA) 38 – Sharing files and folders 38 – System requirements 39 General Playback 39 – Basic operations for video and audio

content 39 – Basic operations for photo content 40 – Resume playback 40 – Last Scene Memory 41 On-Screen Display 41 – To control video playback 42 – To control photo view 43 Advanced Playback 43 – Repeat playback 43 – Repeating a specific portion 43 – Playing from selected time 44 – Selecting a subtitle language 44 – Hearing a different audio 44 – Watching from a different angle 44 – Changing the TV Aspect Ratio 45 – Changing subtitle Code Page 45 – Changing the Picture Mode 46 – Viewing content information 46 – Changing content list view 47 – Selecting a subtitle file 47 – Listening to music during slide show 48 – Playing content to 3D 49 Advanced Features 49 – Wi-Fi Direct™ 50 – Enjoying Miracast™

Table of Contents 7

50 – Enjoying BD-Live™ 51 – Enjoying web browsing 52 – LG AV Remote 52 – Private Sound Mode 52 – Using an USB keyboard or mouse 53 – Audio CD recording 54 Using the Premium 54 Using the LG Smart World 55 – Signing in 55 – Searching online content 56 Using the My Apps Menu

5 Troubleshooting

57 Troubleshooting 57 – General 58 – Network 59 – Picture 59 – Customer support 59 – Open source software notice

6 Appendix

60 About Magic Remote Control 61 Network Software Update 61 – Network update notification 61 – Software update 63 Additional Information 63 – File requirement 64 – AVCHD (Advanced Video Codec High

Definition) 65 – About DLNA 65 – Certain system requirements 65 – Compatibility notes 66 Audio Output Specifications 68 Area Code List 69 Language Code List 70 Trademarks and Licenses 72 Specifications 73 Maintenance 73 – Handling the unit 73 – Notes on discs 74 Important Information Relating to

Network Services

Some of the content in this manual may dier from your player depending on the software of the player or your service provider.

Getting Started8

Introduction

Playable Discs and symbols used in this manual

Getting Started

Media/Term Logo Symbol Description

yDiscs such as movies that can be purchased or

rented.

y“Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.

yBD-R/RE discs that are recorded in BDAV format.

yBD-R/RE discs that contain Movie, Music or

Photo les.

yISO 9660+JOLIET, UDF and UDF Bridge format

yDiscs such as movies that can be purchased or

rented.

yMovie mode and nalized only

ySupports the dual layer disc also

Finalized AVCHD format

yDVD±R/RW discs that contain Movie, Music or

Photo les.

yISO 9660+JOLIET, UDF and UDF Bridge format

Blu-ray

DVD-ROM

DVD-R

DVD-RW

DVD+R

DVD+RW

y u i

DVD-RW (VR)

Audio CD

CD-R/RW

Note –

Caution –

y u i

VR mode and nalized only

Audio CD

yCD-R/RW discs that contain Movie, Music or

Photo les.

yISO 9660+JOLIET, UDF and UDF Bridge format

Indicates special notes and operating features.

Indicates cautions for preventing possible damages from abuse.

Note

yDepending on the conditions of the

recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

yDepending on the recording software & the

nalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.

yBD-R/RE, DVD±R/RW and CD-R/RW discs

recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

yIf you record a disc using a personal

computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

yThis player requires discs and recordings to

meet certain technical standards in order to achieve optimal playback quality.

yPre-recorded DVDs are automatically set to

these standards. There are many dierent types of recordable disc formats (including CD-R containing MP3 or WMA les) and these require certain pre-existing conditions to ensure compatible playback.

yCustomers should note that permission

is required in order to download MP3 / WMA les and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

yYou have to set the disc format option

to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)

Getting Started 9

About the “7” Symbol Display

“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specic media.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labelled same as the rear of the unit or “ALL”.

System Select

Open the disc tray using the R (OPEN/CLOSE) button and then, press and hold red (R) coloured button for more than ve seconds to change the colour system (PAL /NTSC /AUTO).

Getting Started

Getting Started10

Remote Control

Getting Started

Remote Control Indicator:

(RF & Bluetooth transmitter) Blinks when operating.

(POWER): Switches the

b 1

unit ON or OFF.

BACK (1): Exits the menu

or returns to the previous screen.

HOME (b): Displays the

Home screen.

Direction buttons (

): Selects an option in

a/d

the menu. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. To display the pointer again, shake the Magic remote control from side to side.

w/s/

Wheel (a): Selects menus

or options and conrms your input; Scrolls the screen to search a menu on the web browser.

(Play/Pause): Starts

g N

playback./Pauses playback.

Z (Stop): Stops playback.

c/v

backward or forward. (Press and hold

C/V

next track or le.

exits On-Screen Display.

use a virtual numbered keypad. (Press and hold m (INFO/MENU))

Coloured (R, G, Y, B)

buttons: Use to navigate BDROM menus. They are also used as shortcut buttons for specic menus.

: Searches

C/V

(INFO/MENU): Displays or

: If necessary, you can

)

: Moves previous/

Getting Started 11

WHEEL

Magic remote control functions

The Magic remote control operates by pairing with your unit. Once you purchased the unit, please register the Magic remote control as follows;

To register the Magic remote control

To use the Magic remote control, register it with your unit rst.

1. Turn on the unit and wait for about 10 seconds and then press and hold Wheel (a) button while pointing the remote control at the unit.

2. The remote control is automatically registered and a registration completion message appears on the screen.

Note

If you failed to register the Magic remote control, turn o the unit and try again.

Battery Installation

How to use Magic remote control

y Shake the remote control slightly to make the

pointer appear on the screen.

y Shake the Magic remote control slightly to the

right and left to make the pointer appear on the centre of screen.

y The magic pointer disappears when the remote

control is not moved for ve seconds.

How to use Magic remote tip

y When you press the wheel, it also functions as

Selection button.

y You can scroll through menus using the wheel.

y Use your wrist to move the pointer more easily.

Note

yIf the Magic remote control’s connection is

unstable or has any problems, cancel the registration and try it again. (page 60)

yDepending on the content, the pointing of

the magic remote control does not work. For controlling, please use the direction keys on the remote.

Getting Started

Open the battery cover at the bottom of the Remote Control, and insert two (1.5 V AA ) alkaline batteries with 4 and 5 matched correctly.

Caution

Do not mix old and new batteries, as this may damage the remote control.

Getting Started12

Front Panel

Getting Started

Disc Tray

Display Window

Remote Sensor

(OPEN / CLOSE)

d R

Rear Panel

AC power cord

DIGITAL AUDIO OUT (OPTICAL)

e T

(STOP)

f I g 1/!

USB Port

LAN port

HDMI OUT

(PLAY / PAUSE)

(POWER)

Connecting 13

Connecting to Your TV

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.

Rear of the unit

HDMI cable

Set the TV’s source to HDMI (Refer to TV’s Owner’s manual).

Note

Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.

Additional Information for HDMI

yWhen you connect a HDMI or DVI compatible

device make sure of the following:

-Try switching o the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.

yNot all HDCP-compatible HDMI or DVI devices

will work with this player.

-The picture will not be displayed properly with non-HDCP device.

Note

yIf a connected HDMI device does not accept

the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.

yWhen you use HDMI connection, you can

change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 14)

ySelect the type of video output from the

HDMI OUT jack using [HDMI Colour Setting] option on the [Settings] menu (see page

26).

yChanging the resolution when the

connection has already been established may result in malfunctions. To solve the problem, turn o the player and then turn it on again.

yWhen the HDMI connection with HDCP

is not veried, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.

yIf there are noises or lines on the screen,

please check the HDMI cable (length is generally limited to 4.5 m).

Connecting

Connecting14

What is SIMPLINK?

Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power O, etc.

Refer to the TV owner’s manual for the details of

Connecting

SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as shown above.

Note

Depending on the disc type or playing status, some SIMPLINK operation may dier from your purpose or not work.

Resolution Setting

The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Settings] menu.

1. Press HOME (b).

2. Use Wheel (a). The [Settings] menu appears.

3. Use

4. Use press Wheel (a) to move to the third level.

to select the [Settings] and press

a/d

to select [DISPLAY] option then press

w/s

to move to the second level.

to select the [Resolution] option then

w/s

Note

yIf your TV does not accept the resolution

you have set on the player, you can set resolution to 576p as follows:

1. Press R to open the disc tray.

2. Press I (STOP) for more than 5 seconds.

yIf you select a resolution manually and then

connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

yIf you select a resolution that your TV

does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.

yThe 1080p video output frame rate may

be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc.

5. Use press Wheel (a) to confirm your selection.

to select the desired resolution then

w/s

Connecting 15

Connecting to an Amplifier

Make one of the following connections, depending on the capabilities of your existing equipment.

yHDMI Audio connection (page 15)

yDigital Audio connection (page 16)

Since many factors aect the type of audio output, see “Audio Output Specications” for details (page

66).

About Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the logos on the front of the Audio/ Video receiver and the manual. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)

Connecting to an Amplifier via HDMI Output

Connect the player’s HDMI OUT jack to the corresponding in jack on your amplier using a HDMI cable.

Rear of the unit

Connecting

HDMI cable

Receiver/Amplier

HDMI cable

Connect the amplier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable if your amplier has HDMI output jack. (Refer to amplier’s owner’s manual)

You will need to activate the player’s digital output. (See “[AUDIO] Menu” on page 27.)

Connecting16

Connecting to an Amplifier via Digital Audio Output

Connect the player’s OPTICAL AUDIO OUT jack to the corresponding in jack on your amplier using an optional digital audio cable.

Rear of the unit

Connecting

Optical cable

Receiver/Amplier

You will need to activate the player’s digital output. (See “[AUDIO] Menu” on page 27.)

Connecting 17

Connecting to your Home Network

This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live interactivity and on-line content services.

Wired network connection

Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.

Please refer to the documentation for your network device for further instructions.

Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.

Note

yWhen plugging or unplugging the LAN

cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.

yDo not connect a modular phone cable to

the LAN port.

ySince there are various connection

congurations, please follow the specications of your telecommunication carrier or internet service provider.

yIf you want to access content from DLNA

servers, this player must be connected to the same local area network with them via a router.

yTo set your PC as a DLNA server, install the

SmartShare PC Software on your PC. (page

37)

Broadband service

Router

DLNA certied servers

Rear of the unit

Connecting

Connecting18

Wired Network Setup

If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.

Connecting

Preparation

Before setting the wired network, you need to connect the broadband internet to your home network.

1. Select [Connection Setting] option in the [Settings] menu then press Wheel (a).

2. Read the preparations for the network settings and then press Wheel (a) while [Start] is highlighted.

Advanced Setting

If you want to set the network settings manually, use [Network Setting] menu and press Wheel (a).

1. Use

2. Use

to select [Advanced Setting] on the

w/s

to select [Wired] and press Wheel

w/s

(a).

w/s/a/d

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP address automatically.

Note

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server].

to select the IP mode

Network will automatically be connected to the unit.

3. Select [Next] and press Wheel (a) to apply network settings.

Network connection status is displayed on the screen.

4. Press Wheel (a) while [OK] is highlighted to finish the wired network settings.

Connecting 19

Wireless network connection

Another connection option is to use an Access Point or a wireless router. The network conguration and connection method may vary depending on the equipment in use and the network environment.

Wireless

Communication

DLNA certied servers

Access Point or Wireless Router

Broadband service

Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings.

For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option. If you do chose to use the wireless option, note that performance can sometimes be aected by other electronic devices in the home.

Wireless network setup

For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Settings] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the player to the network.

Preparation

Before setting the wireless network, you need to:

-Connect the broadband internet to the wireless home network.

-Set the access point or wireless router.

-Note the SSID and security code of the network.

1. Select [Connection Setting] option in the [Settings] menu then press Wheel (a).

2. Read the preparations for the network settings and then press Wheel (a) while [Start] is highlighted.

If wired network is not connected to the unit, all available networks are displayed on the screen.

3. Use network and press Wheel (a).

If you have security on your access point, you need to input the security code as necessary.

If you use other characters than the english alphabet or digits for the SSID name of your access point or wireless router, it may be displayed dierently.

to select a desired SSID of wireless

w/s

Note

Connecting

Connecting20

Note

Connecting

yWEP security mode generally have 4 keys

available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network.

yAn Access Point is a device that allows you

to connect to your home network wirelessly.

4. Use

w/s/a/d

between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.

Note

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server].

5. Select [Next] and press Wheel (a) to apply network settings.

Network connection status is displayed on the screen.

6. Select [OK] and press Wheel (a) to complete the network connection.

to select the IP mode

Advanced Setting

If you want to set the network settings manually, use [Network Setting] menu and press Wheel (a).

1. Use

2. Follow the instructions of each connection

to select [Advanced Setting] on the

w/s

to select [Wireless] and press Wheel

w/s

(a).

[AP List] - Scans all available access points or

wireless routers within range and display them as a list.

[Network name (SSID)] – Your access point may not be broadcasting its network name (SSID). Check your access point settings through your computer and either set your access point to broadcast SSID, or manually enter the network name in [Network name(SSID)].

[PBC] – If your access point or wireless router that supports the PBC (Push Button Configuration) method, select this option and press the Push Button on your access point within 120 counts. You do not need to know the network name (SSID) and security code of your access point.

[PIN] – If your access point supports the PIN Code configuration method based on WPS(WiFi Protected Setup), select this option and note the code number on the screen. And then, enter the PIN number on a setting menu of your access point to connect. Refer to the documentation for your network device.

method on the screen.

Note

To use PBC and PIN network connection, security mode of your access point must be set to OPEN or AES.

Connecting 21

Notes on Network Connection

yMany network connection problems during

set up can often be xed by re-setting the router or modem. After connecting the player to the home network, quickly power o and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yDepending on the internet service provider (ISP),

the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yOur company is not responsible for any

malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.

yThe features of BD-ROM discs made available

through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.

ySome internet contents may require a higher

bandwidth connection.

yEven if the player is properly connected and

congured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.

ySome internet connection operations may not

be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.

yAny fees charged by an ISP including, without

limitation, connection charges are your responsibility.

yA 10 Base-T or 100 Base-TX LAN port is required

for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.

yYou must use a Router to use xDSL service.

yA DSL modem is required to use DSL service and

a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)

yThe use of a “Router” may not be allowed or its

usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

yThe wireless network operate at 2.4 GHz

radio frequencies that are also used by other household devices such as cordless telephone, Bluetooth® devices, microwave oven, and can be aected by interference from them.

yTurn o all unused network equipment in

your local home network. Some devices may generate network trac.

yFor the purpose of the better transmission,

placing the player from the access point as close as possible.

yIn some instances, placing the access point or

wireless router at least 0.45 m above the oor may improve the reception.

yMove closer to the access point if possible or re-

orient the player so there is nothing between it and the access point.

yThe reception quality over wireless depends on

many factors such as type of the access point, distance between the player and access point, and the location of the player.

ySet your access point or wireless router to

Infrastructure mode. Ad-hoc mode is not supported.

Connecting

System Setting22

Initial Setup

When you turn on the unit for the rst time, the initial setup wizard appears on the screen. Set the display language and network settings on the initial setup wizard.

1. Press 1 (POWER).

The initial setup wizard appears on the screen.

2. Use

w/s/a/d

and press Wheel (a).

3. Try the some features of your Magic remote

System Setting

control by following the guide on the screen.

4. Read and prepare the preparations for the network settings and then press Wheel (a) while [Start] is highlighted.

to select a display language

6. Use

w/s/a/d

between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.

7. Select [Next] and press Wheel (a) to apply network settings.

Network connection status is displayed on the screen.

For details on network settings, refer to “Connecting to your Home Network” on page

17.

8. Check all the settings that you have set in the previous steps.

to select the IP mode

If wired network is connected, the network connection setting will automatically be finished.

5. All available networks are displayed on the screen. Use or desired SSID of wireless network and press Wheel (a).

If you have security on your access point, you need to input the security code as necessary.

to select [Wired Network]

w/s

Press Wheel (a) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use select 1 and press Wheel (a).

9. Displays private sound mode guide. Press Wheel (a).

w/s/a/d

System Setting 23

Settings

Adjust the Setup Settings

You can change the settings of the player in the [Settings] menu.

1. Press HOME (b).

2. Use Wheel (a). The [Settings] menu appears.

3. Use press Wheel (a) to the second level.

4. Use press Wheel (a) to move to the third level.

to select the [Settings] and press

a/d

to select the first setup option, and

s/w

to select a second setup option, and

s/w

[NETWORK] Menu

The [NETWORK] settings are needed to use the software update, BD-Live and on-line content services.

Connection Setting

If your home network environment is ready to connect the player, the player needs to be set the wired or wireless network connection for network communication. (See “Connecting to your Home Network” on page 17.)

Connection Status

If you want to check the network status on this player, select the [Connection Status] options and press Wheel (a) to check whether a connection to the network and the internet have been established.

BD-LIVE connection

You can restrict Internet access when BD-Live functions are used.

[Permitted]

Internet access is permitted for all BD-Live contents.

[Partially permitted]

Internet access is permitted only for BDLive contents which have content owner certicates. Internet access and AACS Online functions are prohibited for all BD-Live contents without a certicate.

[Prohibited]

Internet access is prohibited for all BD-Live contents.

System Setting

5. Use Wheel (a) to conrm your selection.

to select a desired setting, and press

s/w

+ 53 hidden pages