ENGLISH
LCD TV |
PLASMA TV |
OWNER’S MANUAL |
|
LCD TV MODELS |
PLASMA TV MODELS |
32LG60** |
32PG60** |
37LG60** |
42PG60** |
42LG60** |
50PG60** |
42LG61** |
50PG70** |
47LG60** |
60PG70** |
|
50PG40** |
Please read this manual carefully before operating your TV.
Retain it for future reference.
Record model number and serial number of the TV. Refer to the label on the back cover and quote this information.
To your dealer when requiring service.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
ID Number(s): 5102: 32LG6000 |
5251: 32PG6000 |
5103: 37LG6000 |
5252: 32PG6010 |
5104: 42LG6000 |
5100: 42PG6000 |
5484: 42LG6100 |
5249: 42PG6010 |
5105: 47LG6000 |
5101: 50PG6000 |
|
5250: 50PG6010 |
|
5245: 50PG7000 |
|
5244: 60PG7000 |
|
5246: 50PG4000 |
|
|
|
|
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
■ Image shown may differ from your TV
|
|
|
|
|
|
|
Power Cord |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Owner’s Manual |
Batteries |
This feature is not available for all models.
* Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
Polishing Cloth |
Do not use excessive force. This may cause |
|
Polishing cloth for use on |
||
scratching or discolouration. |
||
the screen. |
||
|
Remote Control
PLASMA TV models
|
|
|
|
|
|
|
|
|
|
|
|
(Except 50PG40** ) |
(50PG60** , |
|
|
50/60PG70** only) |
|||
|
(50PG40** only)
Cable management clip
LCD TV models
Cable management clip Protection cover (Refer to p.13)
Cable Holder (32/42PG60** :1EA, 50PG40** :2EA)
*This feature is not available for all models.
Ferrite core (Refer to p.11)
(50/60PG70**, 50PG40** only)
Protection cover (Refer to p.13)
(32PG60** only)
4EA
bolts for stand assembly (Refer to p. 8)
(32/37LG60** only) |
(42LG60**, 42LG61** only) |
32LG60** : 3EA 4EA 2EA 1EA 4EA 37LG60** : 4EA
bolts for stand assembly (Refer to p. 8)
ACCESSORIES
1
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
|
PREPARATION |
|
CONTENTS |
Please set it up carefully so the product doesn’t fall |
|
|
Front Panel Controls..................................................... |
4 |
|
Back Panel Information ................................................ |
6 |
|
Stand Installation........................................................... |
8 |
|
over..................................................................................... |
9 |
|
Back Cover for Wire Arrangement .......................... |
10 |
|
Swivel Stand ................................................................. |
11 |
|
Desktop Pedestal Installation ................................... |
12 |
|
Wall Mount: Horizontal Installation........................ |
13 |
|
Antenna Connection................................................... |
14 |
|
EXTERNAL EQUIPMENT SETUP |
|
|
HD Receiver Setup ...................................................... |
15 |
|
DVD Setup..................................................................... |
17 |
|
VCR Setup..................................................................... |
20 |
|
Insertion of CI Module .............................................. |
22 |
|
Digital Audio Out Setup............................................ |
23 |
|
Other A/V Source Setup........................................... |
24 |
|
Usb in Setup................................................................. |
25 |
|
PC Setup........................................................................ |
26 |
|
- Screen Setup for PC Mode .............................. |
29 |
|
WATCHING TV / PROGRAMME CONTROL |
|
|
Remote Control Key Functions ............................... |
34 |
|
Turning on the TV....................................................... |
36 |
|
Programme Selection ................................................ |
36 |
|
Volume Adjustment ................................................... |
36 |
|
Quick Menu ................................................................. |
37 |
|
On-Screen Menus Selection and Adjustment..... |
38 |
|
Auto Programme Tuning............................................ |
39 |
|
Manual Programme Tuning (In Digital Mode)..... |
40 |
|
Manual Programme Tuning (In Analogue Mode) ... |
41 |
|
Programme Edit ........................................................... |
43 |
|
Booster........................................................................... |
46 |
|
Software Update.......................................................... |
47 |
|
Diagnostics ................................................................... |
48 |
CI Information.............................................................. |
49 |
Selecting the Programme Table............................... |
50 |
Input List........................................................................ |
51 |
................................................................. |
52 |
Input Label .................................................................... |
54 |
AV Mode........................................................................ |
55 |
TO USE THE USB DEVICE |
|
When connecting the USB device.......................... |
56 |
Photo List ...................................................................... |
57 |
Music List........................................................................ |
61 |
EPG (ELECTRONIC PROGRAMME |
|
GUIDE) (IN DIGITAL MODE) |
|
- Switch on/off EPG ............................................... |
64 |
- Select Programme ................................................ |
64 |
- Button Function in NOW/NEXT Guide Mode 65 |
|
- Button Function in 8 Day Guide Mode.......... |
65 |
- Button Function in Date Change Mode......... |
65 |
-Button Function in Extended Description Box . 66
-Button Function in Record/Remind Setting Mode. 66
- Button Function in Schedule List Mode......... |
66 |
PICTURE CONTROL |
|
Picture Size (Aspect Ratio) Control....................... |
67 |
Preset Picture Settings |
|
- Picture Mode-Preset............................................ |
69 |
- Auto Colour Tone Control |
|
(Warm/Medium/Cool) ........................................ |
70 |
Manual Picture Adjustment |
|
- Picture Mode-User option................................. |
71 |
-Picture Mode-Expert Control............................. |
72 |
Picture Improvement Technology........................... |
73 |
Advanced - Film Mode/ Real Cinema .................... |
74 |
Advanced - Black(Darkness) Level ......................... |
75 |
Advanced - Trumotion................................................. |
76 |
TruMotion Demo .......................................................... |
77 |
Eye Care.......................................................................... |
78 |
Picture Reset................................................................. |
79 |
2
Power Indicator ............................................................. |
80 |
Image Sticking Minimization (ISM) Method ........ |
81 |
Power Saving Picture Mode...................................... |
82 |
SOUND & LANGUAGE CONTROL |
|
Auto Volume Leveler................................................... |
83 |
Preset Sound Settings - Sound Mode................... |
84 |
Sound Setting Adjustment -User Mode ............... |
85 |
SRS TruSurround XT .................................................. |
85 |
Clear Voice.................................................................... |
86 |
Balance........................................................................... |
87 |
TV Speakers On/ Off Setup..................................... |
88 |
Selecting Digital Audio Out ..................................... |
89 |
Audio Reset .................................................................. |
90 |
I/II |
|
- Stereo/Dual Reception (In Analogue Mode |
|
Only)........................................................................... |
91 |
- NICAM Reception (In Analogue Mode Only)... |
92 |
- Speaker Sound Output Selection.................... |
92 |
On-Screen Menu Language/Country Selection.. |
93 |
Language Selection (In Digital Mode only)......... |
94 |
TIME SETTING |
|
Clock Setup .................................................................. |
95 |
Auto On/ Off Timer Setting..................................... |
96 |
Auto Shut-off Setting ................................................. |
97 |
Time Zone Setup ........................................................ |
98 |
Sleep Timer Setting .................................................... |
98 |
PARENTAL CONTROL / RATINGS |
|
Set Password & Lock System................................... |
99 |
Block Programme ...................................................... |
100 |
Parental Control......................................................... |
101 |
Key Lock ...................................................................... |
102 |
TELETEXT |
|
Switch on/off ............................................................. |
103 |
SIMPLE Text................................................................ |
103 |
TOP Text...................................................................... |
103 |
FASTEXT...................................................................... |
104 |
Special Teletext Functions ...................................... |
104 |
DIGITAL TELETEXT |
|
Teletext within Digital Service................................ |
105 |
Teletext in Digital Service........................................ |
105 |
APPENDIX |
|
Troubleshooting ........................................................ |
106 |
Maintenance .............................................................. |
108 |
Product Specifications............................................. |
109 |
Programming the Remote Control......................... |
111 |
IR Codes....................................................................... |
113 |
External Control Device Setup............................... |
115 |
CONTENTS
3
PREPARATION
■Image shown may differ from your TV
■If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Plasma TV Models
Remote Control Sensor
POWER
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates green when the TV is switched on.
INPUT |
MENU |
OK |
|
P |
|
INPUT |
MENU |
OK |
VOLUME |
PROGRAMME |
4
LCD TV Models |
|
|
|
P |
PROGRAMME |
|
|
|
|
|
VOLUME |
|
|
OK |
|
OK |
|
Intelligent Sensor |
|
MENU |
MENU |
|
|
Adjusts picture according to the sur- |
|
|
|
|
|
rounding conditions |
|
|
|
|
INPUT |
|
INPUT |
|
POWER
Remote Control Sensor
Power/Standby Indicator
•Illuminates red in standby mode.
•Illuminates White when the TV is switched on.
Note: You can adjust Power Indicator in the
OPTION menu.
PREPARATION
5
PREPARATION
PREPARATION
6
A Image shown may differ from your TV. |
50PG40** Only |
|
Plasma TV Models
50PG40** Only |
2 |
|
|
|
10 |
|
|
1 |
|
|
|
|
|
|
12 |
13 |
2 |
3 |
4 |
5 |
|
|
|
|||
|
|
|
2 |
|
11
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
7 |
|
8 |
9 |
1Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2HDMI Input
Connect a HDMI signal to HDMI IN.
7
8
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.
3RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
5Component Input
Connect a component video/audio device to these jacks.
6RGB Input
Connect the output from a PC.
9Antenna Input
Connect RF antenna to this jack.
10PCMCIA (Personal Computer Memory Card International Association) Card Slot
(This feature is not available in all countries.)
11S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external device to these jacks.
12USB Input
13SERVICE ONLY PORT
LCD TV Models
2 |
3 |
4 |
1 |
HDMI Input
Connect a HDMI signal to HDMI IN.
USB Input
PCMCIA (Personal Computer Memory Card International Association) Card Slot
(This feature is not available in all countries.)
PREPARATION
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
6 |
|
7 |
|
|
|
|
8 |
|
|
|
|
|
|
|
|
1Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
2RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
3RGB Input
Connect the output from a PC.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
4HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.
9
5Component Input
Connect a component video/audio device to these jacks.
6Audio/Video Input
Connect audio/video output from an external device to these jacks.
7OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
8Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks
9Antenna Input
Connect RF antenna to this jack.
7
PREPARATION
PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
32/37/42LG60** , 42LG61** Only
1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2Assemble the parts of the Stand Body with Cover Base of the TV.
32LG60** |
37LG60** |
Stand Body
Cover Base
42LG60** , 42LG61**
Stand Body
Cover Base
3Assemble the TV as shown.
32PG60** Only
1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2Assemble the TV as shown.
3Fix the 4 bolts securely using the holes in the back of the TV.
4Fix the 4 bolts securely using the holes in the back of the TV.
8
A You should purchase necessary components to fix the TV to the wall on the market.
A Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
1 |
2 |
1 |
2 |
1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
3
3Use a sturdy rope to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
PREPARATION
! NOTE
GWhen moving the TV undo the cords first.
GUse a platform or cabinet strong and large enough to support the size and weight of the TV.
GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
9
PREPARATION
PREPARATION
■ Image shown may differ from your TV.
Plasma TV models
1Connect the cables as necessary.
To connect additional equipment, see the External equipment Setup section.
2 Install the CABLE MANAGEMENT CLIP as shown. |
|
|
32/42PG60** |
50PG40** |
50PG60**, 50/60PG70** |
CABLE MANAGEMENT CLIP |
CABLE MANAGEMENT CLIP |
* Fix the Cable Holder as shown and bundle the cables.
How to remove the cable management clip
Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
For the 42PG60** model, press the center of the CABLE MANAGEMENT CLIP and then lift it .
32PG60** |
42PG60 |
50PG40** |
50PG60**, 50/60PG70** |
|
** |
|
|
Separate CABLE MANAGEMENT |
from TV by pressing two latches. |
! NOTE
G Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
10
LCD TV models
1Align the hole with the tab on the CABLE MANAGEMENT CLIP. Turn the CABLE MANAGEMENT CLIP as shown.
Note that excessive force might cause damage to the product when using Cable Management clip.
PREPARATION
2Connect the cables as necessary.
To connect additional equipment, see the External equipment Setup section.
Use of ferrite core (50/60PG70**, 50PG40** Only)
Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord.
The closer the location of the ferrite core to the power plug, the better it is.
Install the power plug closely.
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
11
PREPARATION
AThe TV can be installed in various ways such as on a wall, or on a desktop etc.
AThe TV is designed to be mounted horizontally.
|
EARTHING |
|
|
|
PREPARATION |
|
|
|
|
Ensure that you connect the earth wire to prevent possible |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
electric shock. If grounding methods are not possible, have a |
|
|
|
|
qualified electrician install a separate circuit breaker. |
|
|
|
|
Do not try to earth the TV by connecting it to telephone |
|
|
|
|
wires, lightening rods or gas pipes. |
|
|
|
|
|
|
|
|
|
|
|
|
Power Supply
Circuit breaker
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
|
|
|
|
|
|
4 inches |
|
|
|
|
|
|
|
4 inches |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mount-ing bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches |
4 inches |
|
4 inches
NOT USING THE DESK-TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
Plasma TV models |
LCD TV models |
After removing the protection paper from the protection cover, adhere it to the TV as shown.
PREPARATION
13
PREPARATION
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
PREPARATION
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Antenna
Multi-family Dwellings/Apartments (Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Signal
Amplifier
VHF
ANTENNA
IN
ANTENNA
IN
■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.
■If signal needs to be split for two TVs,use an antenna signal splitter for connection.
14
■To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42PG60** models.
■Image shown may differ from your TV.
■This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a component cable
1
Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the TV.
2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV.
3Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4Select Component input source using the INPUT button on the remote control.
1
2
SETUP EQUIPMENT EXTERNAL
Signal |
Component |
HDMI |
|
|
|
|
|
|
|
|
|
480i/576i |
Yes |
No |
|
480p/576p |
Yes |
Yes |
|
720p/1080i |
Yes |
Yes |
|
1080p |
Yes |
Yes |
|
(50/60Hz only) |
(24Hz/30Hz/50Hz/60Hz) |
||
|
|||
|
|
|
|
|
|
|
15
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
|
1 |
Connect the digital set-top box to HDMI/DVI IN 1, |
|
|
HDMI IN 2, HDMI IN 3 or HDMI IN 4(Except |
||
|
|
|
|
|
|
|
50PG40**) jack on the TV. |
|
2 |
|
|
EXTERNAL |
Turn on the digital set-top box. |
||
3 |
Select HDMI1, HDMI2, HDMI3 or HDMI4(Except |
||
|
|
|
(Refer to the owner’s manual for the digital set-top box.) |
SETUPEQUIPMENT |
|
|
50PG40**) input source using the INPUT button on |
|
|
the remote control. |
|
|
|
|
|
|
|
|
|
Connecting with an HDMI to DVI cable
1Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.
2Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.
3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4Select HDMI1 input source using the INPUT button on the remote control.
1
12
16
Connecting with a component cable
1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV.
|
1 |
2 |
Connect the audio outputs of the DVD to the |
|
COMPONENT IN AUDIO jacks on the TV.
3 Turn on the DVD player, insert a DVD.
2
4 Select Component input source using the INPUT button on the remote control.
5Refer to the DVD player's manual for operating instructions.
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV |
Y |
PB |
PR |
|
|
|
|
|
|
|
|
|
Y |
PB |
PR |
Video output ports |
Y |
B-Y |
R-Y |
on DVD player |
Y |
Cb |
Cr |
|
Y |
Pb |
Pr |
|
|
|
|
SETUP EQUIPMENT EXTERNAL
17
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Connecting with a Euro Scart cable
1 |
Connect the Euro scart socket of the DVD to the AV1 |
|
|
|
|
|
|||
Euro scart socket on the TV. |
|
|
|
|
2 |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
Turn on the DVD player, insert a DVD. |
|
|
||
|
|
|
|
|
|
|
|
|
|
3 |
Select AV1 input source using the INPUT button on |
|
|
|
the remote control. |
|
|
||
|
|
|||
|
|
|
If connected to AV2 Euro scart socket, select AV2 input source.
4Refer to the DVD player's manual for operating instructions.
!NOTE
G Any Euro scart cable used must be signal shielded.
Connecting with a S-Video cable (Plasma TV Only)
1 |
Connect the S-VIDEO output of the DVD to the S - |
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
||||||||
VIDEO input on the TV. |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
Connect the audio outputs of the DVD to the AUDIO |
|
|
|
|
|
|
||||||
3 |
input jacks on the TV. |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
Turn on the DVD player, insert a DVD. |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
Select AV3 input source using the INPUT button on |
|
|
|
|
|
|
||||||
5 |
the remote control. |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
||||||||
Refer to the DVD player's manual for operating instruc- |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
||||||
|
tions. |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1
|
|
(R) AUDIO (L) |
|
|
|
|
|
|
|
|
|
|
AUDIO/ |
|
|
VIDEO |
|
|
|
|
VIDEO |
S-VIDEO |
L |
R |
ANT IN |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANT OUT
12
18
Connecting the HDMI cable
Connect the HDMI output of the DVD to the
1HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3 or HDMI IN 4(Except 50PG40**) jack on the TV.
2 Select HDMI1, HDMI2, HDMI3 or HDMI4(Except 50PG40**) input source using the INPUT button on the remote control.
3 Refer to the DVD player's manual for operating instructions.
1
! NOTE
G The TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
SETUP EQUIPMENT EXTERNAL
19
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
■To avoid picture noise (interference), allow adequate distance between the VCR and TV.
■Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
When connecting with a RF Cable
|
|
|
|
|
|
|
|
|
|
|
|
|
ANT OUT S-VIDEO VIDEO |
L |
R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1
OUTPUT
SWITCH
Wall Jack
2
Antenna
1Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
2 Connect the antenna cable to the ANT IN socket of the VCR.
3Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
20
Connecting with a Euro Scart cable
1 |
Connect the Euro scart socket of the VCR to the AV1 |
|
Euro scart socket on the TV. |
||
|
||
2 |
Insert a video tape into the VCR and press PLAY on |
|
|
the VCR. (Refer to the VCR owner’s manual.) |
|
|
1 |
|
3 |
Select AV1 input source using the INPUT button on |
|
the remote control. |
||
|
||
4 |
If connected to AV2 Euro scart socket, select AV2 |
|
|
input source. |
|
|
|
|
|
|
|
|
|
|
(R) AUDIO (L) |
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO/ |
|
||||||||
|
VIDEO |
|
|
! NOTE
G Any Euro Scart cable used must be signal shielded.
SETUP EQUIPMENT EXTERNAL
When connecting with a RCA cable
1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
3Select AV3 input source using the INPUT button on the remote control.
!NOTE
G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
1
S-VIDEO VIDEO |
L |
R |
ANT IN |
OUTPUT |
|
|
ANT OUT |
SWITCH |
|
|
|
21
EXTERNAL EQUIPMENT SETUP
Connecting with a S-Video cable (Plasma TV Only)
|
1 |
Connect the S-VIDEO output of the VCR to the S - |
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
||||||||
|
VIDEO input on the TV set. The picture quality is |
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
improved; compared to normal composite (RCA cable) |
|
|
|
|
|
|
||||||
|
|
|
input. |
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
||||||
|
2 |
Connect the audio outputs of the VCR to the AUDIO |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|||||||||
EXTERNAL |
3 |
input jacks on the TV. |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
||||||||||
Insert a video tape into the VCR and press PLAY on the |
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|||||||||
EQUIPMENT |
4 |
VCR. (Refer to the VCR owner’s manual.) |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|||||
Select AV3 input source with using the INPUT button on |
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|||||||||
|
|
|
the remote control. |
|
|
|
|
|
|
||||||
SETUP |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
! NOTE |
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
||||||||||
G If both S-VIDEO and VIDEO sockets have been connected to |
|
|
|
|
|
|
|||||||||
|
the S-VHS VCR simultaneously, only the S-VIDEO can be |
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
received.
S-VIDEO VIDEO |
L |
R |
ANT IN |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTPUT |
ANT OUT |
SWITCH |
|
12
-To view the encrypted (pay) services in digital TV mode.
-This feature is not available in all countries.
Insert the CI Module to PCMCIA (Personal Computer
1Memory Card International Association) CARD SLOT of TV as shown.
For further information, see p.49.
1
TV
22
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
1 |
Connect one end of an optical cable to the TV Digital |
|
|
Audio (Optical) Output port. |
|
2 |
Connect the other end of the optical cable to the digi- |
|
|
tal audio (Optical) input on the audio equipment. |
|
3 |
Set the “TV Speaker option - Off ” in the AUDIO |
1 |
|
|
|
|
menu.(Gp.88). Refer to the external audio equipment |
|
|
instruction manual for operation. |
|
|
|
2 |
CAUTION
GDo not look into the optical output port. Looking at the laser beam may damage your vision.
SETUP EQUIPMENT EXTERNAL
23
EXTERNAL EQUIPMENT SETUP
EQUIPMENT EXTERNAL |
|
SETUP |
1 |
|
Camcorder
Video Game Set
VIDEO L R
1Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours . (Video = yellow, Audio Left = white, and Audio Right = red)
2
3
Select AV3 input source with using the INPUT button on the remote control.
Operate the corresponding external equipment.
Refer to external equipment operating guide.
24
1
1Connect the USB device to the USB IN jacks on the side of TV.
2 |
After connecting the USB IN jacks, you use the USB function. (G p.56) |
|
|
|
|
SETUP EQUIPMENT EXTERNAL
25
EXTERNAL EQIPMENT SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
|
|
|
|
|
|
|
1 |
Connect the RGB output of the PC to the RGB IN |
|
EXTERNAL |
||||
(RGB/DVI) jack on the TV. |
||||
|
|
|
(PC) jack on the TV. |
|
EQUIPMENT |
2 |
Connect the PC audio output to the AUDIO IN |
||
4 |
Select RGB input source using the INPUT button on |
|||
|
|
3 |
Turn on the PC and the TV |
|
SETUP |
|
the remote control. |
||
|
|
|||
|
|
Connecting with a HDMI to DVI cable
1Connect the DVI output of the PC to the HDMI/DVI IN1 jack on the TV.
2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
3Turn on the PC and the TV.
4Select HDMI1 input source using the INPUT button on the remote control.
21
AUDIO |
RGB OUTPUT |
|
12
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
||
|
DVI-PC OUTPUT |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
26
Supported Display Resolution
Plasma TV Models
RGB-PC, HDMI/DVI-PC mode |
|
|
|
|
HDMI/DVI-DTV mode |
|
||
|
|
|
|
|
|
|
|
|
Resolution |
Horizontal |
Vertical |
|
|
|
Resolution |
Horizontal |
Vertical |
Frequency(kHz) |
Frequency(Hz) |
|
|
|
Frequency(kHz) |
Frequency(Hz) |
||
|
|
|
|
|
||||
|
|
|
|
|
|
|
31.649 |
59.94 |
720x400 |
31.468 |
70.08 |
|
|
|
640x480 |
||
640x480 |
31.469 |
59.94 |
|
|
|
|
31.469 |
60 |
800x600 |
37.879 |
60.31 |
|
|
|
720x480 |
31.47 |
59.94 |
1024x768 |
48.363 |
60.00 |
|
|
|
|
31.50 |
60 |
1280x768 |
47.78 |
59.87 |
|
|
|
720x576 |
31.25 |
50.00 |
1360x768 |
47.72 |
59.8 |
|
|
|
1280x720 |
37.50 |
50.00 |
1920x1080 |
66.587 |
59.937 |
|
|
|
|
44.96 |
59.94 |
1280x1024 |
63.98 |
60.02 |
|
|
|
|
45.00 |
60 |
1400x1050 |
65.317 |
59.979 |
|
|
|
1920x1080 |
28.125 |
50.00 |
|
|
|
||||||
|
|
|
|
|
|
|
33.72 |
59.94 |
|
50/60PG70**, 50PG40** only |
|
||||||
|
|
33.75 |
60 |
|||||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
27.00 |
24.00 |
|
|
|
|
|
|
|
33.75 |
30 |
|
|
|
|
|
|
|
56.25 |
50.00 |
|
|
|
|
|
|
|
67.433 |
59.94 |
|
|
|
|
|
|
|
67.50 |
60 |
LCD TV Models
|
RGB-PC, HDMI/DVI-PC mode |
|
|
|
HDMI/DVI-DTV mode |
|
||
|
|
|
|
|
|
|
|
|
|
Resolution |
Horizontal |
Vertical |
|
|
Resolution |
Horizontal |
Vertical |
|
Frequency(kHz) |
Frequency(Hz) |
|
|
Frequency(kHz) |
Frequency(Hz) |
||
|
|
|
|
|
||||
|
|
|
|
|
|
|
31.469 |
59.94 |
|
720x400 |
31.468 |
70.08 |
|
|
640x480 |
||
|
640x480 |
31.469 |
59.94 |
|
|
|
31.469 |
60 |
|
800x600 |
37.879 |
60.31 |
|
|
720x480 |
31.47 |
59.94 |
|
1024x768 |
48.363 |
60.00 |
|
|
|
31.50 |
60 |
|
1280x768 |
47.78 |
59.87 |
|
|
720x576 |
31.25 |
50.00 |
|
1360x768 |
47.72 |
59.8 |
|
|
|
31.50 |
50.00 |
|
1920x1080 |
66.647 |
59.988 |
|
|
1280x720 |
44.96 |
50.94 |
|
1280x1024 |
63.981 |
60.02 |
|
|
|
45.00 |
60 |
|
1400x1050 |
65.317 |
59.979 |
|
|
|
28.125 |
50.00 |
|
|
|
|
|||||
|
|
|
|
|
|
|
33.72 |
59.94 |
|
|
|
Except 32LG60** |
|
||||
|
|
|
1920x1080 |
33.75 |
60 |
|||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
27.00 |
24.00 |
|
|
|
|
|
|
|
33.75 |
30 |
|
|
|
|
|
|
|
56.25 |
50.00 |
|
|
|
|
|
|
|
67.433 |
59.94 |
|
|
|
|
|
|
|
67.50 |
60 |
|
|
|
|
|
|
|
|
|
SETUP EQUIPMENT EXTERNAL
27
EXTERNAL EQIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
! NOTE
G To enjoy vivid picture and sound, connect a PC to the TV.
GAvoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
GConnect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution.
GThere may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
GThe synchronization input waveform for Horizontal and Vertical frequencies are separate.
GConnect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.
GConnect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV).
GIf using a sound card, adjust PC sound as required.
GThis TV uses a VESA Plug and Play Solution. The
TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV.
GDDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode.
GIf required, adjust the settings for Plug and Play functionality
GIf the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.
GIf graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)
GDOS mode may not work depending on the video card if you use a HDMI to DVI cable.
GIf you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.
28