OPTIFLUX 2070
Quick Start
Battery powered electromagnetic flowmeter
OPTIFLUX 2070
General safety notes
You can find the newest and/or additional information on the CD-ROM
provided, in the handbook, the datasheet, special manuals, certificates
and the download center at www.krohne.com.
Installation, mounting, commissioning, and maintenance can be
performed only by trained personnel.
Responsibility for suitability and intended use of this instrument rests
solely with the user.
The supplier accepts no liability for inappropriate use by the customer.
Improper installation and operation may lead to loss of warranty.
Moreover, the "general terms and conditions" on the back of the bill
apply, which form the basis for the sales contract.
If you have to send the device back to the manufacturer or supplier, fill
out the form contained on the CD-ROM and enclose it with the device.
Unless this form is completely filled out, it will unfortunately not be
possible for the manufacturer to perform repair or inspection.
Respect general and local electrical safety requirements.
7309992100 2
Visual check
Scope of delivery
OPTIFLUX 2070
GK070: 10.234
1 OPTIFLUX 2070 with blue protection cap
2 Quick Start
3 Factory calibration report
4 CD-ROM including Handbook, Quick Start, Technical datasheet
5 Grounding ring (optional)
6 Cable (remote version only)
www.krohne.com 3
Mounting position and flange deviation
1 L
max
2 L
min
OPTIFLUX 2070
CAUTION!
Max. permissible deviation of pipe flange faces:
L
- L
max
≤ 0.5 mm
min
www.krohne.com 5