KROHNE OPTIFLEX 1300 C Data sheet
Level Measurement
Application Information Sheet
Company name:
Address:
City, State, Zip:
End user (destination)
General Information
Measurement type,
Measuring principle,
Tank/ vessel tag #
A .. tank/ vessel height
B .. tank/ vessel width
C .. maximum fluid level
D .. minimum fluid level
E .. process connection
F .. nozzle diameter
G .. nozzle height
H .. nozzle center to wall
Stilling well/ stand pipe?
Process conditions
Medium name
Medium surface,
Characteristics,
Dielectric constant,
Vessel pressure,
Medium temperature,
Magnetic bypass level indicator (MLI) specifications
Process connections
Orientation
Centerline length
Measuring length
Chamber mat'l
Float material
Limit switch (s)
Vent required?
Drain required?
Isolation valves
Transmitter?
RF facing
Process connection,
FMCW & TDR radar specifications
Feedthrough seal,
Sensor material,
FMCW radar sensor,
FMCW radar options,
TDR radar sensor,
Length:
TDR radar options,
Indicator / scale
A
B
C
D
E
F
G
H
Measured
range
No
Smooth
Clean
Upper
Normal
Normal
Size:
Without
316 SST
Drop antenna
Non-contacting
FMCW radar
Horn antenna
316L SST
FKM/FPM
FF facing
ASME 150#
Crystalizes
Foams
Contacting
TDR radar
Single cable
Wave horn
Hastelloy
Kalrez 6375
inch NPT
ASME 300#
Deposits
Strong surface movement (agitated tank)
Ultrasonic
Contacting (level and interface measurement)
Double cable
Hygienic antenna
PTFE
EPDM
ASME 600#
Coats
Displacer
liquid
Magnetic bypass level indictor (MLI)
sludge
Dusty
ASME 900#
PFA
PVDF
Single rod
ASME 1500#
Metaglass ® dual sealing
Polypropylene
Double rod
powder
paste
ASME 2500#
Coaxial
Yes
(describe dimensions and material)
Tank/ vessel material,
MLI
Lower
Minimum
Minimum
(required for level interface measurement)
Maximum
Maximum
psia°Fpsig°Cbara
barg
Contact name:
Phone number:
Email address:
page 1 of 2
Mode of operation
Sealing
OPTIWAVE 5200 C/F
OPTIWAVE 6300 C OPTIWAVE 7300 C
OPTISOUND 3010, 3020, 3030 & VU30/31
• 2-wire FMCW radar • 2-wire FMCW radar • 2-wire FMCW radar
• 2 & 4-wire ultrasonic level meter
• For liquid applications • For powders, granulates or solids • For liquids, paste and slurries • Ultrasonic level and open channel flow meter
• Compact or remote versions • Ideal for dusty applications • Optional 2nd current output • PVDF or CPVC sensor material
• SIL2 compliant • 0.4" standard accuracy • 0.12" standard accuracy
OPTIFLEX 1100 C
OPTIFLEX 1300 C
OPTIFLEX 2200 BM 26 series
• 2-wire TDR guided radar • 2-wire TDR guided radar • 2-wire loop-powered TDR guided radar • Magnetic bypass level indicator
• Economical solution
• liquids and solids applications • liquid and solid applications • For liquid applications
• liquid or solids applications
• Interface applications • Compact or remote versions • Interface applications
• SIL2 compliant • Optional 2nd current output • PP or PTFE antenna for corrosive products • Can be combined with FMCW radar
• Optional Foundation Fieldbus, • SIL2 compliant • Can be combined with TDR radar
• Optional Profibus PA • Converter can be installed up to 328' from sensor
Non-Contacting Level Devices
Contacting Level Devices
KROHNE Level Solutions
sales@txflowsolutions.com
(281) 216-5181
FMCW & TDR radar specifications
Agency approvals,
Signal converter,
Converter housing,
Power supply,
Communication protocol,
Output signal,
Calibration,
Display,
Orientation,
Without
FM IS
Without
Horizontal
Without HMI
Aluminum
24 VDC
Without
HART
with HMI display on the side
Vertical
with HMI display on the top
SIL2 compliant
FM XP
Compact-mounted
120 VAC
Stainless steel
Foundation Fieldbus
Non-contacting level measurment
• FMCW radar, 2-wire
• Liquids, pastes & slurries
• HART, FF, Profibus PA
• SIL2, CRN compliant
• TDR guided radar, 2-wire
• Economical solution
• Can be combined with FMCW radar
• SST sensor
• Liquid applications
• Interface application
• Can be combined with TDR radar
• Magnetic bypass level indicator (MLI)
• FMCW radar, 2-wire
• Liquid , paste or slurry applications
• FMCW radar, 2-wire
• Solids, powders & granulates
• TDR guided radar, 2-wire
• Liquids & solids
• Interface applications
FDA
Remote-mounted
(remote signal cable length):
Profibus PA
Standard
2-point calibration
with weather protection cover
• 2 & 4-wire version
• PVDF or CPVC sensor material options
• Ideal for dustry applications
• 2nd current output option
• 0.12" standard accuracy
• Ultrasonic level and open channel flow meter
• 2nd current output option
• HART, FF, Profibus PA
• 2nd current output option
• SST, Hastelloy sensor
• Liquid & solids
• Liquid & solids
• SIL2 compliant
• TDR guided radar, 2-wire loop-powered
• Compact or remote converter configurations
• SST, PP or PTFE antenna
• Converter can be installed up to 328' from sensor
• SST, PP, PTFE antenna
• SST, Hastelloy C22, PP, PTFE antenna
Contacting level measurement
Notes/ comments:
NACE-design MR0175
5-point calibration
Loading...