Kenmore 79570332410, 79570332411, 79570333410, 79570333411, 79570339410 Owner’s Manual

...

0 (0)

Use & Care Guide

Manual de Usa y Cuidado

Guide d'Ufilisafion et d'Enfrefien

English / Espa_ol / French

Models/ModeJos/Mod_les: 795°7033*

Kenmoreo

©F

II11II111I 111111

MFL63264291

Sears Brands Management Corporation

Noffman Estates, IL 60179 U.S.A.

WWW. kenrnore,corn

www, searsocom

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2C3

www.sears.ca

Warranty .............................................................................3

Protection Agreements ..............................................4

important Safety instructions ...........................5-7

Electrical & Grounding Requirements ..............7

Parts and Features .......................................................8

Refrigerator Installation .............................. 9-17

Unpacking Your Refrigerator .......................... 9

Installation ....................................................................10

Removing/Replacing Your Refrigerator and

Freezer Handles, Doors and Drawers .......11-16

Leveling and Door Alignment ...................... 17

Using Your Refrigerator ............................ 18-28

Setting the Controls .................................. 18-19

In-Door Ice Bin ..........................................................20

Automatic Icemaker ................................ 21-22

Food Storage Guide .................................... 23

Refrigerator Section

Water Dispenser ........................................... 24

Refrigerator Shelves ................................................25

HUMiDiTY CONTROLLED CRISPER ............ 26

Temperature Controlled Pantry Drawer ........ 26

Grab-N-Go Case ............................................... 27

_,- Freezer Section

Extra Ice Bin ................................................. 27

Durabase ........................................................ 28

Durabase Divider .......................................... 28

Pullout Drawer .............................................. 28

Water Fiffer ............................................... 29-32

Care And Cleaning ................................... 33-34

General Cleaning Tips ................................ 33

Exterior .......................................................... 33

Inside Walls ................................................... 33

Door Liner And Gaskets ............................... 33

Plastic Parts .................................................... 33

Condenser Coils ............................................. 33

LED Replacement ........................................... 33

Power Interruptions ....................................... 34

When You Go On Vacation ........................ 34

When You Move ............................................ 34

Connecting the Water Line ...................... 35-37

Troubleshooting Guide ............................. 38-45

Kenmore Connect .......................................... 46

Service ............................................. Back Cover

REFRIGERATOR WARRANTY

KENMORE LiMiTED WARRANTY

FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or

workmanship when it is correctly installed, operated and maintained according to all supplied instructions.

WiTH PROOF OF SALE, a defective appliance will receive free repair or replacement at option

of seller.

To arrange for warranty service, call 1-800-4-MY-HOME® (1-800-469-4663)

This warranty applies for only 90 DAYS from the sale date in the United States, and is void in Canada, if

this appliance is ever used for other than private household purposes.

This warranty covers ONLY defects in material and workmanship, and will NOT pay for:

1. Expendable items that can wear out from normal use, including but not limited to filters,

belts, screw-in base light bulbs and bags.

2. A service technician to instruct the user in correct product installation, operation

or maintenance.

3. A service technician to clean or maintain this product.

4. Damage to or failure of this product if it is not installed, operated or maintained according to

all instructions supplied with the product.

5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its

intended purpose.

6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils

other than those recommended in all instructions supplied with the product.

7. Damage to or failure of parts or systems resulting from unauthorized modifications made

to this product.

Disclaimer of implied warranties; limitation of remedies

Customer's sole and exclusive remedy under this limited warranty shall be product repair or replacement

as provided herein. Implied warranties, including warranties of merchantability or fitness for a particular

purpose, are limited to one year or the shortest period allowed by law. Seller shall not be liable for

incidental or consequential damages. Some states and provinces do not allow the exclusion or limitation

of incidental or consequential damages, or limitation on the duration of implied warranties of

merchantability or fitness, so these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States or Canada*.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to

state.

* In-home repair service is not available in all Canadian geographical areas, nor will this warranty cover

user or servicer travel and transportation expenses if this product is located in a remote area (as defined

by Sears Canada Inc.) where an authorized servicer is not available.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

Sears Canada Inc., Toronto, Ontario, Canada M5B 2C3

Master Protection Agreements

Congratulations on making a smart purchase. Your new

Kenmore ® product is designed and manufactured for

years of dependable operation. But like all products,

it may require preventive maintenance or repair from

time to time. That's when having a Master Protection

Agreement can save you money and aggravation.

The Master Protection Agreement also helps extend

the life of your new product. Here's what the

Agreement* includes:

Parts and labor needed to help keep products

operating properly under normal use, not just defects.

Our coverage goes well beyond the product warranty.

No deductibles, no functional failure excluded from

coverage-- real protection.

" Expert service by a force of more than 10,000

authorized Sears service technicians, which means

someone you can trust will be working on your product.

* Unlimited service calls and nationwide service, as

often as you want us, whenever you want us.

" "No-lemon" guarantee - replacement of your covered

product if four or more product failures occur within

twelve months.

• Product replacement if your covered product can't be

fixed.

* Annual Preventive Maintenance Check at your request

- no extra charge.

• Fast help by phone - we call it Rapid Resolution

- phone support from a Sears representative on all

products. Think of us as a "talking owner's manual."

Power surge protection against electrical damage due

to power fluctuations.

$250 Food Loss Protection annually for any food

spoilage that is the result of mechanical failure of any

covered refrigerator or freezer.

Rental reimbursement if repair of your covered

product takes longer than promised.

25% discount off: the regular price of any non-covered

repair service and related installed parts.

Once you purchase the Agreement, a simple phone call

isall that it takes to schedule service. You can call at

any time day or night, or schedule a service appointment

online.

The Master Protection Agreement is a risk free purchase.

If you cancel for any reason during the product warranty

period, we will provide a full refund or a prorated refund

anytime after the product warranty period expires.

Purchase your Master Protection Agreement today!

Some limitations and exclusions apply.

For prices and addltional information in the

U.S.A. call 1-800-827-6655.

* Coverage in Canada varies on some items. For full

detaffs call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances,

garage door openers, water heaters, and other major

home items, in the U.S.A. or Canada call

1-800-4-MY-HOME ®.

In the space below, record the date of purchase, model and serial number of your product. You will find the model and

serial number printed on an identification label located on the interior liner of the refrigerator compartment. Have these

items of information available whenever you contact Sears concerning your product.

Model No.

Serial No.

Date of Purchase

Save these instructions and attach your sales receipt for future reference.

BASIC SAFETY PRECAUTIONS

This guide contains many important safety messages. Always read and obey all safety messages.

This is the safety alert symbol. It alerts you to safety messages that inform you

of hazards that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard

signal word DANGER, WARNING, or CAUTION. These words mean:

You will be killed or seriously injured if you do not follow instructions.

You can be killed or seriously injured if you do not follow instructions.

Indicates an imminently hazardous situation which, if not avoided,

may result in minor or moderate injury, or product damage.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

,A WARNING: This product contains chemicals known to the State of California

to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

To reduce the risk of fire, electric shock, or

personal injury when using your product, basic

safety precautions should be followed, including

the following.

Read all instructions before using this appliance,

- NEVER unplug your refrigerator by pulling on the

power cord. Always grip the plug firmly and pull it

straight out from the outlet.

o Do not modify or extend the power cord length. It

could cause electric shock or fire.

,,When moving your refrigerator away from the wall,

be careful not to roll over or damage the power

cord.

• If the supply cord is damaged, it must be replaced

by the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

Do not use a cord that shows cracks or

abrasion damage along its length or at either the

plug or connector end.

• DO NOT store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any other

appliance.

• DO NOT allow children to climb, stand, or hang on

the refrigerator doors or shelves in the refrigerator.

They could damage the refrigerator and seriously

injure themselves.

Keep fingers out of pinch point areas; clearances

between the doors and cabinet are necessarily

small. Be careful closing doors when children are in

the area.

Unplug your refrigerator before cleaning or making

any repairs.

NOTE:We strongly recommend that any servicing

be performed by a qualified individual.

SAVE THESE INSTRUCTIONS

• Before replacing a burned-out light bulb, unplug

the refrigerator or turn off power at the circuit

breaker or fuse box in order to avoid contact with a

live wire filament. (A burned-out light bulb may

break when being replaced.)

NOTE: Some models have LED interior lighting

and service should be performed by a qualified

technician.

• When you are finished, reconnect the refrigerator to

the electrical source and reset the controls

(Thermostat, Refrigerator Control, and or Freezer

Control, depending on the model) to the desired

setting.

, This refrigerator must be properly installed in

accordance with the Attention installer

instructions that were taped to the front of the

refrigerator.

• After your refrigerator is in operation, do not touch

the cold surfaces in the freezer compartment when

hands are damp or wet. Skin may adhere to the

extremely cold surfaces.

In refrigerators with automatic icemakers, avoid

contact with the moving parts of the ejector

mechanism, or with the heating element that

releases the cubes. DO NOT place fingers or

hands on the automatic icemaking mechanism

while the refrigerator is plugged in.

DO NOT refreeze frozen foods which have thawed

completely. The United States Department of

Agriculture in Home and Garden Bulletin No. 69

says:

...You may safely refreeze frozen foods that have

thawed if they still contain ice crystals or if they are

still cold--below 4°C.

...Thawed ground meats, poultry or fish that have

any off-odor or off-color should not be refrozen and

should not be eaten. Thawed ice cream should be

discarded. If the odor or color of any food is poor

or questionable, dispose of it. The food may be

dangerous to eat.

Even partial thawing and refreezing reduces the

eating quality of foods, particularly fruits,

vegetables and prepared foods. The eating quality

of red meats is affected less than that of many

other foods. Use refrozen foods as soon as

possible to save as much of their quality as you

can.

SAVE THESE iNSTRUCTiONS

•This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not

play with the appliance,

Junked or abandoned refrigerators are

dangerous, even if they are sitting for just a few days.

If you are getting rid of your old refrigerator, please

follow the instructions at right to help prevent

accidents (child entrapment and suffocation).

BEFORE YOU THROW AWAY

YOUR OLD REFRIGERATOR

OR FREEZER

• Take off the doors.

°Leave the shelves in place so that

children may not easily climb inside.

Your old refrigerator may have a cooling system

that used CFCs or HCFCs (chlorofluorocarbons or

hydrochlorofluorocarbons). CFCs and HCFCs are

believed to harm stratospheric ozone if released to the

atmosphere. Other refrigerants may also cause harm to

the environment if released to the atmosphere.

If you are throwing away your old refrigerator, make

sure the refrigerant is removed for proper disposal

by a qualified technician. If you intentionally release

refrigerant, you may be subject to fines and imprisonment

under provisions of environmental legislation.

IMPORTANT: Please read carefully.

TO CONNECT ELECTRICITY

Electrical Shock Hazard

FOR PERSONAL SAFETY, this appliance must be

properly grounded. Have the wall outlet and the circuit

checked by a qualified electrician to make sure the

outlet is properly grounded.

3-prong

grounding type I

wallreceptacle

3-prong _----x___ i \_

grounding I "_'-_ I ,_

Ensure proper

I ground exists

/// before use.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain

conditions, the use of an extension cord is not

recommended. However, if you still elect to use an

extension cord, it is absolutely necessary that it be a UL-

listed (USA), 3-wire grounding type appliance extension

cord having a grounding type plug and outlet, and that

the electrical rating of the cord be 15 amperes (minimum)

and 120 volts.

Use of an extension cord will increase the clearance

needed for the back of the refrigerator.

RECOMMENDED GROUNDING METHOD

The refrigerator should always be plugged into its own

individual properly grounded electrical outlet rated for

115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes.

This provides the best performance and also prevents

overloading house wiring circuits which could cause a fire

hazard from overheated wires, it is recommended that a

separate circuit serving only this appliance be provided.

Use a receptacle that cannot be turned off: with a switch

or pull chain. Do not use an extension cord.

Where a standard two-prong wall outlet is encountered,

it is your personal responsibility and obligation to have

it replaced with a properly grounded three-prong wall

outlet.

_.J

Use this page to become more familiar with the parts and features of your refrigerator.

NOTE: This guide covers several different models. The refrigerator you have purchased may have some or all of the items

listed below. The locations of the features shown below may not match your model.

O Refrigerator Light

Water Filter

Fixed Door Bins

Refrigerator Shelves

Ice Compartment

(Icemaker and Ice Bin)

Humidity Controlled Crisper

Temperature Controlled Pantry Drawer

Durabase Divider

Pullout Drawer

Durabase

Water Tank Cover

O Articulating Mullion

O Grab-N-Go Case

Cheese & Butter Bin

Condiment Bin

Kenmore Connect

Excessive Weight Hazard:

Use two or more people to move and install the

refrigerator. Failure to do so can result in back or

other injury.

UNPACKING YOUR REFRIGERATOR

Remove tape and any temporary labels from your

refrigerator before using. Do not remove any warning-

type labels, the model and serial number label, or

the Tech Sheet that is located under the front of the

refrigerator, behind the base grille.

To remove any remaining tape or glue, rub the area

briskly with your thumb. Tape or glue residue can also be

easily removed by rubbing a small amount of liquid dish

soap over the adhesive with your fingers. Wipe with warm

water and dry.

Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your refrigerator.

Refrigerator shelves are installed in the shipping position.

Please reinstall shelves according to your individual

storage needs.

F:xcessive Weight Hazard:

Your refrigerator is heavy. When moving the

refrigerator for cleaning or service, be sure to protect

the floor. Always pull the refrigerator straight out when

moving it. Do not wiggle or walk the refrigerator when

trying to move it, as floor damage could occur.

Explosion Hazard:

Keep flammable materials and vapors, such as

gasoline, away from the refrigerator. Failure to do so

can result in fire, explosion, or death.

BASE GRILLE INSTALLATION

To remove the base grille:

] )Open the Freezer Drawer. (Drawer not shown for

clarity.)

2) Once the drawer is open, and there is suffcient

clearance, remove the screws on the top of

the cover.

To replace the base grille:

Place the cover into position and then insert and

tighten the screws.

INSTALLATION (continued)

To avoid noise and vibration, the unit must be leveled

and installed on a solidly constructed floor. If required,

adjust the leveling legs to compensate for unevenness

of the floor. The front should be slightly higher than

the rear to aid in door closing. Leveling legs can be

turned easily by tipping the cabinet slightly. Turn the

leveling legs to the left to raise the unit or to the right to

lower it. (See LEVELING AND DOOR ALIGNMENT.)

NOTE: Installing on carpeting, soft tile surfaces,

a platform or weakly supported structure is not

recommended.

PRIOR TO USE

1. Clean your refrigerator thoroughly and wipe off all

dust that accumulated during shipping.

2. Install accessories such as ice cube bin, drawers,

shelves, etc., in their proper places. They are packed

together to prevent possible damage during shipment.

3. Allow your refrigerator to run for at least two to three

hours before putting food in it. Check the flow of

cold air in the freezer compartment to ensure proper

cooling. Your refrigerator is now ready for use.

INSTALLATION

The refrigerator should always be plugged into its own

individual properly grounded electrical outlet rated for

115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes.

This provides the best performance and also prevents

overloading house wiring circuits which could cause a fire

hazard from overheated wires. It is recommended that a

separate circuit serving only this appliance be provided.

Shock Hazard:

To reduce the risk of electric shock, do not install the

refrigerator in a wet or damp area.

Install this appliance in an area where the temperature

is between 55°F (13°C) and ]10°F (43°C). If the

temperature around the appliance is too low or high,

cooling ability may be adversely affected.

Select a place where a water supply can be easily

connected for the automatic icemaker.

NOTE: The water pressure must be between 20 and

120 psi (140 and 830 kPa) on models without a water

filter and between 40 and120 psi (280 and 830kPa)

on models with a water filter.

Too small of a distance from adjacent items may

result in lowered freezing capability and increased

electricity consumption charges. Allow at least 24

inches (61 cm) in front of the refrigerator to open the

doors and at least 2 inches (5.08 cm) between the

back of the refrigerator and the wall.

NOTE: Removing the doors is the recommended procedure when it is necessary to move the refrigerator through

a narrow opening. If it is necessary to remove the handles, follow the directions below.

HOW TO REMOVE REFRIGERATOR

DOOR HANDLE

NOTE: Handle appearance may vary from

the illustrations on this page.

Removing Refrigerator Handle

Loosen the set screws with a 3/32 in. Allen

wrench and remove the handle.

Set Screw

Mounting

Fasteners

NOTE: If the handle mounting fasteners need

to be tightened or removed, use a 1/4 in. Allen

wrench.

Allen

Wrench

HOW TO REPLACE REFRIGERATOR

DOOR HANDLE

NOTE: Handle appearance may vary from

the illustrations on this page.

Replacing Refrigerator Door Handle

Place the handle on the door by fitting

the handle footprints over the mounting

fasteners and tightening the set screws

with a 3/32 in Allen wrench.

NOTE: If the handle mounting fasteners

need to be tightened or removed, use a

1/4in. Allen wrench.

Mounting

Fasteners

NOTE:Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow

opening. If it is necessary to remove the handles, follow the directions below.

HOW TO REMOVE FREEZER DOOR HANDLE

NOTE: Handle appearance may vary from illustrations on

this page.

Removing Freezer Drawer Handle

Loosen the set screws located on the lower side of

the handle with a 1/8in. Allen wrench and remove the

handle.

NOTE: If the handle mounting fasteners need to be

tightened or removed, use a 1/4in. Allen wrench.

HOW TO REPLACE FREEZER DOOR HANDLE

NOTE: Handle appearance may vary from illustrations on

this page.

Replacing Freezer Drawer Handle

Place the handle on the door by fitting the handle

footprints over the mounting fasteners and tightening

the set screws with a 1/8in. Allen wrench.

NOTE: If the handle mounting fasteners need to be

tightened or removed, use a 1/4in. Allen wrench.

When assembling or disassembling the handles:

*Grasp the handle firmly to ensure it wilt not drop or

cause injury.

* Prevent the handle from swinging toward nearby

people or animals.

* Insert the bracket hole of the handle into the stopper

bolt of the door exactly, then assemble the set screws

to fix the handle in place.

*Check for any gap between the door and handle

after the handle is fixed in place.

REMOVING AND REPLACING

REFRIGERATOR DOORS

Excessive Weight Hazard"

Use two or more people to remove and install the

refrigerator doors. Failure to do so can result in back or

other injury.

Electrical Shock Hazard

Disconnect the electrical supply to the refrigerator

before installing. Failure to do so could result in

serious injury or death.

Do not put hands, feet or other objects into the air

vents or bottom of the refrigerator. You may be

injured or receive an electrical shock.

To remove the ie{t" re{rigerafor door:

On the back of the refrigerator, pull the water tube out of

the collet rifting on the connector by pressing the fitting

release ring (see picture below).

_IL CAUTION= Before you begin, remove food and bins

from the doors.

(2) (1)

(3).

(7)_ /

(8)

1.Open the door. Remove the fop hinge cover screw (1).

Lift up the cover (2).

2. Remove the cover.

3. Pull out the tube (3).

4. Disconnect all wire harnesses (4).

5. Remove the grounding screw (5).

6. Rotate the hinge lever (6) counterclockwise. Lift the top

hinge (7) free of the hinge lever latch (8).

_, CAUTION: When lifting the hinge free of the latch,

be careful that the door does not fall forward.

Lift the door from the middle hinge pin and

remove the door.

Place the door, inside facing up, on a non-scratching

surface.

To remove the right refrigerator door:

/(2)

_(4)

1. Open the door. Remove the top hinge cover screw (1).

Lift up the cover (2).

2. Remove the cover.

3. Rotate the hinge lever (3) clockwise. Lift the top

hinge (4) free of the hinge lever latch (5).

_, CAUTION: When lifting the hinge free of the latch, be

careful that the door does not fall forward.

4. Lift the door from the middle hinge pin and remove

the door.

5. Place the door, inside facing up, on a non-scratching

surface.

Reinstalling the Refrigerator Door

Left Door

1. Lower the door onto the middle hinge pin (10).

2. Fit the top hinge (7) over the hinge lever latch (8) and into

place. Rotate the lever (6) clockwise to secure the hinge.

3. install the grounding screw (5) and connect the two

wire harnesses (4).

4. Push the water tube (3) located at the top of the left

door into the hole beside the left hinge on the top of

the cabinet until it exits through the back.

5. Insert the water supply tube (3) into the connector until

you see only one scale mark. Fully insert the tube over

5/8in. (15 mm).

6. Hook the tabs on the left side of the hinge cover (1)under the

edge of the top hinge (7) and position the cover in

place, insert and tighten the cover screw (1).

(2) (I)

(3).

(8)

I,_ Right Door

1. Lower the door onto the middle hinge pin (9).

2. Fit thetop hinge (4) over the hinge lever latch (5) and into

place. Rotate the lever (3) counterclockwise to secure

the hinge.

3. Hook the tabs on the right side of hinge cover (2) under

the edge of the top hinge (4) and position the cover in

place. Insert and tighten the cover screw (1).

_/(2)

(3)

(lO)

,CAUTION

Collet

Tube

Scale Mark

Clip --

After inserting, pull the tube to

make sure that it is secure and

reinsert the clip.

+ 32 hidden pages