iRobot Roomba 790 User Manual

IMPORTANT

Wireless Command Center

The Wireless Command Center is an optional accessory for Roomba 700 Series models, 780 and above.

The Wireless Command Center lets you conveniently control Roomba’s functions. You can use it to turn Roomba on and off, schedule Roomba to clean, and steer Roomba around your room. Please refer to the Owner’s Manual on how to set the time, and to set, view, change and delete schedules.

Roomba

Troubleshooting

Light

Capacitive

Touch Buttons

DAY

DOCK

MON

TUES

HOUR

CLOCK

WED

THRS FRI SATSUN

MINUTE

SPOTSCHEDULE

Roomba Battery Indicator

Pairing the Wireless Command Center

Wireless Command Centers are set to control only one Roomba. Prior to using your Wireless Command Center, you need to pair it with your Roomba following the instructions below.

1. Fully charge Roomba’s battery.

2. Remove Roomba from its charger or Home Base. Ensure Roomba is OFF.

3. Install four “AA” batteries into the Command Center. Press CLEAN on the Command Center. The days of the week will ﬂash from right to left.

5. Press and hold the Command Center’s LEFT and RIGHT drive arrow buttons simultaneously for a few seconds until all the lights on the Command Center ﬂash to indicate that the pairing is complete.

Directional

Buttons

4. Place the Command Center on top of the Roomba you want to pair it with. The Roomba will turn ON. The user panel on both the Roomba and the Command Center will match each other.

Visit http://www.irobot.com/global for further support.

U.S. Pat. Nos. D556,961 | 6,594,844 | 6,690,134 | 6,809,490 | 6,883,201 | 6,956,348 | 7,155,308 | 7,173,391 | 7,196,487 | 7,288,912 | 7,332,890 | 7,388,343 | 7,389,156 | 7,429,843 | 7,430,455 | 7,441,298 | 7,441,298 | 7,448,113. Additional patents pending.

WED