Integra DTR-4.9 Brochure
FEATURES
DTR-4.9
AMPLIFICATION:
• 5 x 110 Watts/Channel at 6Ω
• 5 x 90 Watts/Channel at 8Ω
• Discrete Output Stages for All Channels
• Wide Range Amplier Technology — WRAT (5 Hz - 100 kHz)
• Optimum Gain Volume Circuitry
• High Current Power Supply (H.C.P.S.)
PROCESSING:
• HDMI™ (v.1.3a with 1080p Support, xvColor, LipSync)
• Dolby® Digital Plus, Dolby® Digital and Pro-Logic II; DTS®,
Neo:6, and 96/24 decoding
• Advanced TI (Aureus™) 32-bit Processing DSP Chip
• 192 kHz/24-Bit Audio DACs for All Channels
• A-Form Listening Mode Memory and IntelliVolume Input Level
Calibration System
• Music Optimizer to Enhance Compressed Music Files
• Independent Crossover Adjustment for Front/Center/Surround
• 5 Band Graphic Equalizer
• A/V Synchronization Function (Up to 100 ms in 5 ms steps)
2-Zone, 5.1 Channel Surround Receiver
CONNECTIONS:
• 1080p Capable HDMI (3in/1out)
• HD Component Video Switching (2in/1out, 50 MHz)
• Assignable Digital Inputs (3 HDMI / 2 Optical / 2 Coaxial)
• HDMI/Component Video Assignable to Tape/CD
• Color-Coded 5.1-Multichannel Inputs
CUSTOM INTEGRATION FEATURES:
• Bi-directional RS-232 & Ethernet Port for 3rd Party Control Systems
• Zone 2 Pre-Out with Bass/ Treble and Balance Control
• Main Zone & Zone 2 Max & Power On Volume Settings
• IntelliZone for Second Room Playback and Control
• Dealer Settings Memory Store & Recall with Lock/Unlock
• Permanently Stored Memory Settings
• Dual IR Inputs With Common Output
• 3 Unique Assignable IR Code Sets
• 3 Programmable 12V triggers (With Adjustable Delay)
• RIHD (Remote Interactive over HDMI)
•
Optional Rack Mount Kit Available-
IRK-155-3A
Designed to Integrate. Built to Stimulate.
DTR-4.9
2-Zone, 5.1 Channel Surround Receiver
SPECIFICATIONS
AMPLIFIER
Continuous average power output (FTC)
All channels: 90 W per channel min. RMS at 8Ω,
2 channels driven from 20 Hz to 20 kHz
with no more than 0.08% total
harmonic distortion.
110 W min. RMS at 6Ω, 2 channels
driven from 1 kHz with no more than
0.1% total harmonic distortion.
Dynamic power output (stereo): 2 × 210 W at 3Ω
2 × 180 W at 4Ω
2 × 110 W at 8Ω
Frequency response: 5 Hz to 100 kHz: +1/–3 dB
Signal-to-noise ratio: 100 dB (LINE, IHF-A)
Total harmonic distortion: 0.08% at rated power
IM distortion: 0.08% at rated power
Damping factor: 60 at 8Ω
Speaker impedance: 6Ω to 16Ω
INPUT SENSITIVITY AND IMPEDANCE
Line: 200 mV, 47 kΩ
TONE CONTROL
Bass: ±10 dB at 50 Hz
Treble: ±10 dB at 20 kHz
FM
Tuning range: 87.5-107.9 MHz (100-kHz steps)
Usable sensitivity, stereo: 22.2 dBf, 2.0 µV (75 ohm IHF)
AM
Tuning range: 530-1,710 kHz (10-kHz steps)
Usable sensitivity: 300 µV/m
GENERAL
Power supply: AC 120 V, 60 Hz
Power consumption: 4.9 A
Dimensions (W x H x D): 17-1/8” x 6-13/16” x 15-3/8”
435 x 173 x 391 mm
Weight: 25.1 lbs. (11.4 kg)
Optional mounting kit: IRK-155-3A
U dimension: 4U
.
OUTPUT LEVEL AND IMPEDANCE
Rec out: 200 mV, 470Ω
Pre out: 1 V, 470Ω
Zone 2 line output: 100 mV, 470Ω
435 [17.13]
360 [14.17]
All trademarks are registered trademarks of their respective holders.
Due to a policy of continuous product improvement, Integra reserves the right to
change specications and appearance without notice.
06/2008 Printed in the USA
173 [6.81]
157 [6.18]
40 [1.57]
173 [6.81]
94 [3.70]
60 [2.36]
391 [15.39]
328 [12.91]
215 [8.46]
Designed to Integrate. Built to Stimulate.
www.integrahometheater.com
173 [6.81]
173 [6.81]
Loading...