182S
PowerPlug™ Disconnect - Model 182S
Installation Instructions:
#30-682SM
#30-682SF
TABLE 2: Wire Size & Type
Wire Type Wire Size
Solid 18-22 AWG
Stranded 18 AWG (16 strand or less)
Tin Bonded 18-22 AWG (16 strand or less)
Copper to copper connections only. Do not use on Aluminum.
WARNING
Electrical Shock Hazard.
Contact with high voltage may cause falling, serious injury, or death.
Disconnect power before servicing.
Electrical Fire Hazard.
Use in application exceeding voltage and current ratings listed can cause an
electrical fire resulting in serious injury or death.
Only use in accordance with Tables 1, 2 and 3, and local electrical wiring
code.
Instructions:
Conductor installation:
1. Wiring must comply with all applicable electrical codes.
2. Turn off power before removing or installing disconnect.
3. Strip wires to 3/8 inch (9,5 mm).
4. Grip wire firmly and push conductor into port marked #1 on male connector half.
5. Repeat step 4 for port #2.
6. Repeat steps 4 and 5 for female connector half.
7. Use only one conductor per port and assure that no copper is exposed on any of the
wires inserted.
8. See disconnect de-mate/mate installation instructions on this page when disconnecting
the connector.
9. The wire insertion side of this product is listed for ONE TIME USE ONLY. DO NOT REMOVE
AND REPLACE WIRES.
TABLE 3: Environmental Conditions
Environmental Conditions Rating
Temperature Rating 105°C (221°C)
Flame Rating UL94-0
Disconnect de-mate / mate installation
1. To de-mate, grasp disconnect at each end and pull apart to separate the disconnect halves.
Do NOT pull on wires.
2. To mate the disconnect, grasp each disconnect half, align halves, and push together.
3. Completed connection should appear as shown.
TABLE 1: Voltage/Current Combinations:
Voltage (V) Current (A)
120 3
277 1.3
347 1
480 0.75
600 0.60
This disconnect can be used with other voltages under 600V. The current
rating for other voltages can be determined by dividing 360W by the specific
voltage. Example: 360W
÷ 120V = 3.0A
30-682SM 30-682SF Mated Assembly
IDEAL INDUSTRIES, INC.
Becker Place
Sycamore, IL 60178, U.S.A.
800-435-0705 Customer Assistance
www.idealindustries.com
ND 7520-1
Loading...