Item #1000 014 078
Model #HD12120
USE AND CARE GUIDE
12/120 VOLT AUTO AND HOME INFLATOR
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service
8 a.m. 6 p.m., EST, Monday Friday
1-888-43-HUSKY
HUSKYTOOLS.COM
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this inflator. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Husky!
Table of Contents
Table of Contents.......................................................... |
2 |
Operation ....................................................................... |
4 |
Safety Information......................................................... |
2 |
Maintenance .................................................................. |
5 |
Warranty......................................................................... |
3 |
Replacing the Fuse |
5 |
Pre-Operation ................................................................ |
3 |
||
Specifications |
3 |
........................................................Care And Cleaning |
5 |
Troubleshooting............................................................ |
5 |
||
Package Contents............................................................................ |
3 |
|
|
|
Safety Information |
|
|
□ Allow inflatorto cool 5 minutes after each 3 minutes |
|
|||||
|
□ Please read and understand this entire manual |
|
|
|
||||||
|
□ |
before attempting to operate this product. |
|
|
of continuous operation at 120 PSI. Allow inflator to |
|
||||
|
|
The safety instructions provided in this manual are |
|
|
cool 10 minutes after each 10 minutes of continuous |
|
||||
|
|
not intended to cover all possible conditions that |
|
|
operation at 70 PSI. |
|
||||
|
|
may occur during product operation. Always use |
|
|
|
|
DANGER: |
|
|
|
|
|
common sense and pay attention to safety |
|
|
|
|
|
For best results when using 12 Volt power |
|
|
|
□ |
precautions in this manual. |
|
|
|
|
sources, it is recommended that you operate the |
|
||
|
|
Keep your work area clean and well lit. Cluttered |
|
|
|
|
inflator with your vehicle’s engine running. Make |
|
||
|
|
benches and dark areas increase thepossibility of |
|
|
|
|
absolutely sure you are outsideor in an open, well |
|
||
|
□ |
personal injury or property damage. |
|
|
|
|
ventilated area and not inside aconfined area, such as |
|
||
|
|
, |
|
|
|
|
a garage, as bodily injuryor asphyxiation could occur. |
|
||
|
|
|
|
|
|
Always allow for proper ventilation. |
|
|||
|
|
Keep bystanders, children, and visitors away while |
|
|
|
|
|
|
|
|
|
□ |
operating theinflator as distractions cancause you |
|
|
|
|
CAUTION: Do not operate power tools in explosive |
|
||
|
|
|
|
|
|
|||||
|
|
to lose control. |
|
|
|
|
atmospheres, such as in the presence of flammable |
|
||
|
|
Use only a 2 wire extension cord that has a 2 blade |
|
|
|
|
liquids, gases, or dust. |
|
||
|
|
plug and a 2 slot receptacle that will accept the plug |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAUTION: |
|
|
|
|
|
|
on the product. Make sure your extension cord is in |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This inflator operates on both 12Volt DC |
|
||
|
|
good condition. When using an extensioncord, be |
|
|
|
|
|
|
||
|
|
|
|
|
|
and 120 Volt AC power sources. Do not attempt to |
|
|||
|
|
sure to use one heavy enough to carry the current |
|
|
|
|
operate this inflator with anyother source or voltage. |
|
||
|
|
your productwill draw. For lengths less than 6 ft., |
|
|
|
|
Do not rewire or reconfigure the inflator from its |
|
||
|
|
use No. 18 AWG extension cords. An undersized |
|
|
|
|
occur. |
|
|
|
|
|
cord will cause a drop in line voltage, resulting in |
|
|
|
|
original design, as personal injury or bodily harm may |
|
||
|
|
loss of power and overheating. |
|
|
|
|
|
|
|
|
|
□ |
|
|
|
|
CAUTION: |
Ensure that your vehicle 12 Volt vehicle |
|
||
|
|
This appliance has a polarized plug (one blade is |
|
|
|
|
|
|
||
|
|
wider than the other). This plug will fit in a |
|
|
|
|
power outlet isfree of any ash residue or debris. A |
|
||
|
|
polarized outlet only one way. If the plug does not fit |
|
|
|
|
dirty power outlet can cause the inflator and power |
|
||
|
|
|
|
|
|
cord to overheat, causing damage to yourinflator or |
|
|||
|
|
fully in the outlet, reverse the plug. If it still does not |
|
|
|
|
vehicle, and could cause bodily harm or injury. |
|
||
|
|
fit, contact a qualified electrician to install the |
|
|
|
|
CAUTION: |
|
|
|
|
□ |
proper outlet.Do not changethe plug in any way. |
|
|
|
|
|
Do not overinflate.Please follow the |
|
|
|
|
This inflator is designed to inflate car tires, bike |
|
|
|
|
manufacturer’s instructions for the item you are |
|
||
|
|
tires, ATV tires, sports equipment, air mattresses, |
|
|
|
|
inflating. |
|
|
|
|
|
beach toys, and other inflatables. Do not use the |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAUTION: |
Use safety glasses and a face or dust mask |
|
||
|
|
inflator for any purpose other than inflating, or |
|
|
|
|
if needed. |
|
||
|
|
bodily harm or personal injury can occur.This |
|
|
|
|
|
|
|
|
|
|
inflator is not designed to fill air tanks or air shocks. |
|
|
|
|
|
|
|
|
|
□ |
|
|
|
|
IMPORTANT: |
Do not carry the inflator by theair |
|
||
|
|
Do not leave the inflator unattended during |
|
|
|
|
|
|
|
|
|
|
operation. |
|
|
|
|
hose or power cord, as damage may occur. |
|
||
|
|
|
|
|
|
|
|
|
|
|
□Do not operate the inflator in wet or damp areas.
□Operate the inflator only with the attachments that are included.
2
Warranty
If this Husky product fails due to a defect in material orworkmanship within 2 years from date of purchase, return to any
Home Depot store for disposition.
Contact the Customer Service Team at 1 888 43 HUSKY or visit www.HUSKYTOOLS.com.
Pre-Operation
SPECIFICATIONS
Model |
HD12120 |
Max. Pressure |
|
Voltage |
120 PSI |
Hertz |
120 V AC/12 V DC |
Phase |
60 (120 Volt) |
Current |
1 (120 Volt) |
|
1.5 A (120 Volt) |
PACKAGE CONTENTS
|
Part |
|
Description |
|
|
Quantity |
|
|
|
|
Carrying Handle |
|
|
1 |
|
|
A |
|
|
|
|
||
|
|
Power Selector Switch |
1 |
|
|||
|
B |
|
Digital Pressure Gauge |
1 |
|
||
|
C |
|
Power Cord Storage (120 |
1 |
|
||
|
D |
|
Volt) |
|
|
|
|
|
E |
|
Air Hose Storage |
1 |
|
||
|
|
Accessory Storage |
1 |
|
|||
|
F |
|
Air Hose (with quick connect |
1 |
|
||
|
G |
|
valve adaptor) |
|
|
|
|
|
H |
|
Household Power Cord (120 |
1 |
|
||
|
|
Volt) |
|
|
|
Part |
Description |
Quantity |
I |
Off Button |
1 |
J |
Scroll Buttons (for preset PSI level) |
1 |
K |
On Button |
1 |
L |
Presta Valve Adaptor |
1 |
M |
Sports Needle |
2 |
N |
Mattress Nozzle |
1 |
O |
Vehicle Cord (12 Volt) |
1 |
P |
Power Cord Storage (12 Volt) |
1 |
3 |
HUSKYTOOLS.COM |
|
Please contact 1 888 43 HUSKY for further assistance. |
Operation
1Preparing the inflator
□Placethe inflator on a flat surface, near theitem that will be inflated.
□Insert the power cord (H or O) into an appropriate power source (12 Volt DC or 120 Volt AC).
□Connect the air hose (G) quick connect valve adaptor to the item you are inflating, and push thevalve lock lever down to secure the connection.
□Set the power selector switch (B) to the desired position (12 Volt or 120 Volt). The digital pressure gauge (C) will show the current pressureof the item you are inflating.
2Operating the inflator
CAUTION: Avoid over inflating. Never exceed the recommended pressure, as items overinflated may burst and cause serious injury.
□Press the scroll buttons (J) to set thedesired PSI (between 3 and 120). When the digitalpressure gauge (C) is displaying thetarget PSI, thereadout will blink three times at the desired preset level, and then change back to the current PSI level of the item you are inflating.
□Press the on button (K) to begin inflating the item. The inflator will automatically stop when the item reaches the preset PSI level.
□Disconnect the power cord (H or O) fromthe power source.
NOTE: The preset PSI level can be changed during inflationusing the scroll buttons. To stop the inflator during inflation, press the off button. Disconnecting the power cord will clear the preset PSI setting.
4