HP LaserJet M9040/M9050 MFP Series – Manage and Maintain
Load staples
How do I? Steps to perform
1 Move the stapler/stacker away from the MFP.
Load staples
Load staples in the stapler/stacker
2 Open the stapler unit door.
3 On the empty staple cartridge, pull up on the green tab,
and then pull the empty cartridge out.
4 Insert the new staple cartridge, and push down on the
green tab so that the cartridge locks into place.
1
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com
HP LaserJet M9040/M9050 MFP Series – Manage and Maintain
How do I? Steps to perform
5 Close the stapler unit door and push the stapler/stacker
Load staples in the stapler/stacker (continued)
Load staples in the multifunction finisher
2 Slide the stapler unit toward you.
back into place.
1 Open the stapler unit door.
3 Turn the large green knob until the blue dot appears in the
window of the stapler unit.
2
© 2008 Copyright Hewlett-Packard
Development Company, L.P.
www.hp.com