Hp LASERJET M9040, LASERJET M9050 MFP Clear Jams

HP LaserJet M9040/M9050 MFP Series – Clear Jams

Clear staple jams

How do I? Steps to perform

1 Open the stapler-unit door.

Clear a staple jam from the multifunction finisher

2 Slide the stapler unit toward you.

3 Turn the large green knob until you see the blue dot (this

indicates that the stapler is fully open).

CAUTION: The blue dot must appear in the window of the

stapler unit before you remove the staple cartridge. If you try to remove the staple cartridge before the blue dot appears in the window, you could damage the device.

4 Turn the small green knob at the top of the stapler unit

clockwise until the staple cartridge moves to the left of the stapler unit.

1

www.hp.com

HP LaserJet M9040/M9050 MFP Series – Clear Jams

How do I? Steps to perform

5 Remove the staple cartridge.

Clear a staple jam from the multifunction finisher (continued)

6 Pull up on the lever labeled with a green dot.

7 Remove the damaged staple.

8 Press down on the lever labeled with a green dot.

2

www.hp.com

HP LaserJet M9040/M9050 MFP Series – Clear Jams

How do I? Steps to perform

9 Reinstall the staple cartridge.

10 Slide the stapler unit into the device.

11 Close the stapler-unit door.

Clear a jam in the upper half of the stapler head in the multifunction finisher

1 Follow steps 1 through 4 of the procedure to clear a staple

jam from the multifunction finisher.

3

www.hp.com

HP LaserJet M9040/M9050 MFP Series – Clear Jams

How do I? Steps to perform

2 Locate the damaged staple at the back of the stapler

Clear a jam in the upper half of the stapler head in the multifunction finisher (continued)

Clear a staple jam from the stapler/stacker

head, and remove the staple.

3 Follow steps 10 through 11 from the procedure to clear a

staple jam from the multifunction finisher.

1 Move the stapler/stacker away from the MFP.

2 Open the stapler unit door.

4

www.hp.com

HP LaserJet M9040/M9050 MFP Series – Clear Jams

How do I? Steps to perform

3 Pull the cartridge out.

4 Pull up on the lever labeled with a green dot.

Clear a staple jam from the stapler/stacker (continued)

5 Remove the damaged staple.

6 Press down on the lever labeled with a green dot.

5

www.hp.com

HP LaserJet M9040/M9050 MFP Series – Clear Jams

How do I? Steps to perform

7 Reinstall the staple cartridge.

Clear a staple jam from the stapler/stacker (continued)

8 Close the stapler unit door.

NOTE: The stapler needs to reload after clearing a staple

jam, so the first few documents (no more than five) might not be stapled. If a print job is sent and the stapler is jammed or is out of staples, the job will still print as long as the path to the output bin is not blocked.

9 Push the stapler/stacker back into place.

6

www.hp.com