HP LaserJet 4610n Getting Started Guide

6
7
Install software & drivers
The Color LaserJet 4610 series installation CD contains network setup software for the HP Jetdirect 175x. Do not use the separate HP Jetdirect 175x installation CD.
Start
HP Color LaserJet 4610n
www.hp.com/support/clj4610n
See the electronic User Guide on the CD-ROM that came with the printer for more information about the following topics.
- Detailed user instructions
- Troubleshooting information
- Important safety notice
English
- Regulatory information This information is also available at www.hp.com/support/clj4610n
Copyright Information
© 2005 Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change with out notice. The only warranties for HP products and services are set forth in the express warrant statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Part number : Q7732-90901 Edition 1, 2/2005
FCC Regulations
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit different from that to which the receiver is located.
Consult your dealer or an experienced radio/TV technician.
Any changes or modifications to the printer that are not expressly approved by HP could void the user's authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
© 2005 Hewlett-Packard Development Company, L.P.
www.hp.com
*Q7732-90901* *Q7732-90901*
Q7732-90901
1
1.1
1.2
1.3
1.4
42 Kg. 93 lbs.
4610n
2
558.8mm (22.0 in.)
2.1 2.2
482.6mm
457mm
(18.0 in.)
(19.0 in.)
2.3
1294mm (50.0 in.)
804mm
(31.7 in.)
2.4
2.5
15-27 C 56-80 F
2.6
2.7
3
4
3.1 3 3.2 3.7 3 3.8
4.1
4.2 4.3
3.3
3.4
3.5
3.6
4.4 4.5 4.6
5
Choose connection
175x
USB USB
Network via USB
Note : Follow Steps 1 and 2 in the HP Jetdirect 175x installation guide before continuing with Step 7: Install software & drivers.
OR OR
4610n
IEEE-1284-C
4610n4610n
Loading...