Reproduction, adaptation or translation without
prior written permission is prohibited, except as
allowed under the copyright laws.
The information contained herein is subject to
change without notice.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products and
services. Nothing herein should be construed as
constituting an additional warranty. HP shall not
be liable for technical or editorial errors or
omissions contained herein.
EWS v. 8.0
Edition 2, 6/2004
Adobe® and PostScript® are trademarks of
Adobe Systems Incorporated.
Microsoft® and Windows® are U.S. registered
trademarks of Microsoft Corp.
iiENWW
Contents
1 Overview
What is an embedded Web server? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
My Service Provider and My Service Contract. . . . . . . . . . . . . . . . . . . . . 59
Index
iv ContentsENWW
1
Ov erview
What is an embedded Web server?
A Web server provides an environment in which Web programs can run, in much the same way
that an operating system, such as Microsoft® Windows®, provides an environment in which
programs can run on your computer. A Web browser, such as Microsoft Internet Explorer, Apple
Safari, or Mozilla, can show output from a Web server.
An embedded Web server (EWS) resides on a hardware product (such as a printer) or in the
firmware, rather than as software that is loaded on a network server.
The advantage of an embedded Web server is that it provides an interface to the product that
anyone who has a network-connected computer and a standard Web browser can open and
use. No special software needs to be installed or configured.
With the HP Embedded Web Server, you can view product status information, change settings,
and manage the product at your computer.
NoteIn this guide, the terms “product” and “device” are used interchangeably. When products or
devices are discussed in this guide, the information pertains to HP LaserJet printers,
HP Color LaserJet printers, and HP LaserJet MFPs, unless otherwise noted. For specific
information about the features that your printer or multifunction peripheral (MFP) supports, see
the documentation that came with your product.
ENWWWhat is an embedded Web server? 1
Features
You can use the HP Embedded Web Server to view product and network status and to manage
printing functions from your computer, rather than at the product control panel. With the
HP Embedded Web Server, you can perform these tasks:
●View control-panel messages and product-status information.
●Determine the remaining life for all supplies and configure specific ordering information for
supplies.
●Gain access to the product's technical support page.
●Gain access to specific support for recent product events.
●Add or customize links to other Web sites.
●View and change product configuration, such as tray configurations.
●View and change network configuration.
●View and print information pages, such as the Configuration page.
●Receive alerts about product events, such as when the product is low on supplies, through
e-mail.
●Select the language in which to display the HP Embedded Web Server screens.
●Print to an HP product without having to install the product printer driver.
●Conserve energy by scheduling the product sleep delay so that the product will go into sleep
mode after a period of time of not being used.
●Schedule wakeup times for each day so that the product has finished initializing and
calibrating by the time it is to be used.
●Send product configuration and supplies usage information periodically to your service
provider.
Additional features with a permanent storage de vice
If you have a permanent storage device installed in your product, such as a hard disk, you can
view, set up, and retain additional information.
●Alerts. Set up f ou r dif ferent de sti nati on li sts , wit h up t o 20 reci pie nts on e ach of th e four list s.
(Without the permanent storage device, you can send alerts to only four e-mail addresses.)
●Other Links. Add up to five additional links to the Web sites of your choice. (Without the
extra storage, you can add one additional link.)
A hard disk might be installed in your product, depending on the product model. If your product
does not have a hard disk, you might be able to order one. For more information, see the user
guide that came with your product, or go to:
HP Web Jetadmin is a Web-based system management tool that you can use with a Web
browser. The HP Embedded Web Server and HP Web Jetadmin work together to meet all of
your product-management needs. You can use the software to install and manage networked
products effectively. Network administrators can manage networked products remotely, from
practically anywhere.
The HP Embedded Web Server provides a simple, easy-to-use solution for one-to-one product
management in environments that have a limited number of products. Howev er, in environments
that have several products, you might want to use HP Web Jetadmin to manage groups of
products. With HP Web Jetadmin you can discover, manage, and configure multiple products
simultaneously.
HP Web Jetadmin is available from HP online support (http://www.hp.com/go/webjetadmin
).
2 OverviewENWW
System requirements
In order to use the HP Embedded Web Server, you must have the following components:
●A supported Web browser. EWS-supported Web browsers include (but are not limited to) the
following:
• Konqueror 3.0 or later
• Microsoft Internet Explorer 6.0 or later
• Mozilla 1.0 (and Mozilla deriv atives)
• Netscape Navigator 6.2 or later
• Opera 7.0 or later
• Safari 1.0 or later
●A transmission control protocol/Internet protocol- (TCP/IP-) based network connection.
●An HP Jetdirect print server (embedded or enhanced input/output [EIO]) installed in the
product.
Opening the HP Embedded Web Server
Use the following procedure to open the HP Embedded Web Server.
NoteYou cannot view the HP Embedded Web Server screens from outside of a firewall.
1Open a supported Web browser.
2In the Address or Go to field, type the Internet protocol (IP) address that is assigned to the
product (for example, http://192.168.1.1) or the host name (for example, npi[XXXXXX] or a
configured host name such as http://www.[your_server].com).
If you do not know the IP address for the product, you can find it on the Configuration page. See
the user guide that came with your product to see how to print a Configuration page at the
control panel.
Login and logoff
The HP Embedded Web Server (EWS) has screens that can be used to view product information
and change configuration options. The screens that appear, and the settings on them, vary
according to how you gain access to the EWS: as a general user, an information technology (IT)
administrator, or a service provider. These passwords can be customized by an IT administrator
or a service provider.
In a password-protected HP Embedded Web Server, only the Information tab is available to
users who do not log in by using the password. If no password has been set (which is the
default), all of the tabs are visible.
If a password has been set, you must log on as an IT administrator or a service provider to gain
access to the protected HP Embedded Web Server tabs (Settings, Digital Sending, and
Networking).
NoteFor information about changing passwords as an IT administrator, see “Security” on page 31. If
you are a service provider, see your product service guide.
To log in as an administrator
Use the following procedure to log in to the HP EWS as an administrator.
ENWWSystem requirements 3
1After you open the EWS, click the Log In link in the upper-right corner of the screen.
The Enter Network Password dialog box appears, as shown in the following illustration.
The appearance of the login screen might vary, depending on your operating system and
browser.
2Type admin for the user name, type your password, and then click OK.
To log off as an administrator
Use the following procedure to log off.
1Click the Log Off link.
2To complete the logoff, close the browser.
CAUTIONIf you do not close the browser, the connection to the product EWS continues to run and could
pose security risk s.
4 OverviewENWW
Navigating through the HP Embedded Web Server
To navigate through the HP Embedded Web Server screens, click one of the tabs (such as
Information or Settings), and then click one of the menus on the navigation bar that is located
on the left side of the screen.
The following illustration and table provide information about the EWS screens.
NoteThe appearance of the EWS screens might differ from the illustrations in this user guide,
depending on the product features and the settings that your IT administrator has established.
1
2
3
4
Callout EWS screen
feature
Product name
1
and IP address
TabsInformation tabView information about the pro duc t.
2
MenusDifferent on each
3
5
6
DescriptionMore information
View the product name and Internet protocol (IP)
address.
See “Viewing product status from the
You cannot configure the product
using the screens on this tab.
Settings tabUse the features on this tab to
configure the product.
Digital Sending
tab
Networking tabView network status and configure
tab
Use the features on this tab to
configure the digital sending
capabilities.
the product network card.
Click a tab to show the menus.
Information screens” on page 7.
See “Configuring the product from the
Settings screens” on page 19.
See “Setting the digital se nding options” on
page 39.
See “Managing network operation from the
Networking screens” on page 55.
ENWWNavigating through the HP Embedded Web Server 5
Callout EWS screen
feature
Other Linkshp instant
4
Log In/Log Off Different for each
5
ScreenDifferent on each
6
DescriptionMore information
Connect to a set of Web resources
support
that help solve problems and
describe the additional services that
are available for your HP product.
Order SuppliesUse the Internet to order genuine
HP supplies for your HP product.
Product Support Use product-specific help from the
HP Web site to solve a problem.
Log in as an IT administrator or
type of user
service provider.
Click a menu to show a screen.
menu
●See “Using the Other Links as a
resource” on page 57.
●See “hp instant support” on page 58.
●See “Product Support” on page 59.
●See “My Service Provider and My
Service Contract” on page 59.
See “Login and logoff” on page 3.
●See “Viewing product status from the
Information screens” on page 7.
●See “Configuring the product from the
Settings screens” on page 19.
●See “Ma nag ing network operation from
the Networking screens” on pag e55.
6 OverviewENWW
Viewing product status from the
2
Information screens
The Information screens are for informational purposes only; you cannot configure the product
from these screens. To configure the product through the EWS, see “ Co nfi gur i ng the pr oduct
from the Settings screens” on page 19.
The following are the Information screens:
●Device Status (page 8)
●Configuration Page (page 10)
●Supplies Status (page 12)
●Event Log (page 13)
●Usage Page (page 14)
●Device Information (page 15)
●Control Panel (page 16)
●Print (page 17)
NoteSome products do not support all of these screens.
ENWW7
Device Status
Use the Device Status screen to view the current status of the product. The following illustration
and table describe how to use this screen.
1
2
3
4
5
6
7
8
Callout Area on the screenInformation or capability that the area provides
EWS tabs and menusFor more information, see “Navigat ing thro ugh the HP Embedded Web
1
StatusShows the product status (the same information that appears on the
2
Control-panel buttonsUse these control-panel buttons just as you would at the product. To
3
SuppliesShows the perc entage of life remaining for each supply.
4
Server” on page 5.
control-panel displ ay).
select which control-panel buttons appear on this screen, go to the
Security screen on the Settings tab.
8 Viewing product status from the Information screensENWW
Callout Area on the screenInformation or capability that the area provides
Supplies DetailsOpens the Supplies Status screen, where you can view information
5
MediaShows the status and configuration information for the input trays and
6
Change SettingsOpens the Other Settings screen, where you can change the
7
CapabilitiesLists components that are installed in the product.
8
about product supplies.
output bins.
paper-type settings.
ENWWDevice St atus 9
Configuration Page
Use the Configuration Page screen to view current product settings, help troubleshoot printer
problems, and verify the installation of optional accessories such as dual inline memory modules
(DIMMs) or paper-handling devices. The following illustration and table describe how to use this
screen.
1
2
3
Note: See the table on the
following page for
descriptions of the callouts
in this illustration.
4
5
6
10 Viewing product status from the Information screensENWW
Callout Area on the screenInformation or capability that the area provides
EWS tabs and menusFor more information, see “Na vigating th rough the HP Emb edded
1
Printer InformationLists the serial number, version numbers, and other information
2
Installed Personalities and
3
Options
MemoryLists the memory information, PCL Driver Work Space (DWS),
4
SecurityLists the status of the control-panel lock and disk write-protect
5
Paper Trays and OptionsLists the size and type of media that is specified for each of the
6
Web Server” on page 5.
for the product.
Lists all of the printer languag es that are insta lled (such as printer
command language [PCL] and PostScript® [PS]), and lists
options that are installed in each DIMM slot and EIO slot.
and resource saving information.
options.
trays in the product. If a duplexer or any paper-handling
accessories are insta lled o n the pr odu ct, information about thos e
devices is also lis ted here.
ENWWConfiguration Page 11
Supplies Status
The Supplies Status screen shows more detailed supplies information and provides part
numbers for genuine HP supplies. (It is helpful to have the part numbers available when ordering
supplies.) The following illustration and table describe how to use this screen.
1
2
3
4
Note: See the table on the
following page for
descriptions of the callouts
in this illustrations.
12 Viewing product status from the Information screensENWW
Event Log
Callout Area on the screen Information or capability that the area provides
EWS tabs and menus For more information, see “Navigating through the HP Embedded Web
1
Order Supplies linkUse this feature to connect to a Web page that facilitates online
2
Printer Cartridge and
3
Image Drum
Information
Long-Life Supp lie s
4
Information
Server” on page 5.
ordering of supplies from a reseller of your choice.
If available, this lists the percent of life remaining and the estimated
number of pages remaining before the supply is empty; the total
number of pages that ha ve been processed w ith the su ppl y; the sup ply
serial number and HP part numbe r; and an indic at ion of whe t her o r not
the supply has reached the low sta tus.
If available, this lists the percent of life remaining and the estimated
number of pages remainin g with the supply.
The Event Log shows the most recent product events, including jams, service errors, and other
printer errors. The following illustration and table describe how to use this screen.
1
2
3
4
5
6
Callout Area on the screenInformation or capability that the area provides
EWS tabs and menusFor more information, see “Navigating through the HP E mbe dd ed
1
NumberLists the order in which the errors occur red. The last error to occur
2
Page Coun tLists the number of pages that had been printed from the product
3
EventShows the internal event code for each event.
4
Description or PersonalityShows a brief description of some events.
5
Product Support linkProvides access to the HP support Web site for product-specific
6
Web Server” on page 5.
has the highest number.
when the error occurred.
troubleshooting information.
ENWWEvent Log 13
Usage Page
The Usage Page screen gives a page count for each size of media that has passed through the
product, as well as the number of duplexed pages. The total is calculated by multiplying the sum
of the print count values by the Units value.
The information on this screen can be used to determine how much toner or paper to keep on
hand. The following illustration and table describe how to use this screen.
1
2
3
4
Note: See the table on the
following page for
descriptions of the callouts
in this illustration.
14 Viewing product status from the Information screensENWW
5
Callout Area on the screenInformation or capability that the area provides
EWS tabs and menusFor more information, see “Na vigating th rough the HP Emb edded
1
Usage Totals (equivalent)Indicates the types of pages that have been printed, the number
2
UnitsA unit is equal to a standard A4-size (letter-size) page. All other
3
Print Modes & Paper Path
4
Usage (actual)
Historical Printer CoverageIndicates the average amount of toner that is used on each
5
Device Information
The Device Information screen shows the product name, asset number, company name, contact
person, product location, and the product's IP address, name, model, and serial number.
The product name, asset number, company name, contact person, and product location can be
configured from the Device Information screen, which is located on the Settings tab.
Web Server” on page 5.
of single-sided pages that have been printed, the number of
duplexed pages that have been printed, and the total number of
pages that have been printed.
page sizes are referenced in relation to this standard size. A
A4-size (lett er-size) page printed on both sides co unts as 2 units.
Indicates the different print modes that have been used for color
and monochrome (black-and-white) print jobs .
printed page.
ENWWDevice Information 15
Control Panel
For products that have a control panel, the Control Panel screen shows the product
control-panel display as if you were standing at the product. Because this view shows the
product status, it can help you troubleshoot problems with the product.
NoteThe appearance of the screen might vary, depending on your product.
16 Viewing product status from the Information screensENWW
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.