HTWP1400F2WW
Hotpoint HTWP1400F2WW, HTWP1400F1WW, HTWP1400F0WW, HSWP1000M4WW, HSWP1000M3WW Owner’s Manual
...
www.Hotpoint.com
Safety Instructions .......... 2,s
Operating Instructions
Care and Cleaning
of the Washer ...................... 8
Control Panel ...................... 4
Control Settings ................... 4
Features ......................... 5, 6
Loading and Using
the Washer ........................ 7
Troubleshooting Tips...... lO-12
Consumer Support
Consumer Support ................ 16
Warranty .......................... 15
i •
/ i i(;i_iy'
Printed in the United States
Write the model and serial
number here:
Model #
Serial #
You can find them
under the lid of
the washer.
¢9-90530 11-14 GE
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
m
A This isthe safety alert symbol.This symbol alerts to potential hazards that can kill or hurt and others. Allsafety
you you you
messageswill follow the safety alert symbol andthe word "DANGER","WARNING",or "CAUTION".Thesewords are defined as:
_ Indicates a hazardous situation which, if not avoided,will resultin death or serious inJury.
Indicates a hazardous situation which, if not avoided, could result indeath or serious inJury.
_ Indicates hazardoussituation which, if not avoided, could result in minor moderate
a or
inJury.
IMPORTANT SAFETYINSTRUCTIONS
Toreduce the risk of death, fire, explosion,electric shock, or injury to persons when usingyour appliance,
follow basic precautions, including the following:
[] Readall instructionsbefore usingthe appliance.
[] DO NOTwash or dry articles that have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry-
cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
[] DO NOTadd gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These
substances give off vapors that could ignite or explode.
[] Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for 2 weeks
or more. HYDROGENGASISEXPLOSIVE.If the hot water system has not been used for such a period, before using a
washing machine, turn on all hot-water faucets and let the water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable, DO NOTsmoke or use an open flame during this time.
[] DO NOTallow children to play on or in this appliance. Close supervision of children is necessary when this appliance is
used near children. Before the washer is removed from service or discarded, remove the door or lid. Failure to follow
these instructions may result in death or injury to persons.
[] DO NOTreach into the appliance if the tub or agitator is moving to prevent accidental entanglement.
[] DO NOTinstall or store this appliance where it will beexposed to the weather.
[] DO NOTtamper with controls, repair or replace any part of this appliance or attempt any servicing unless specifically
recommended in the user maintenance instructions or in published user repair instructions that you understand and
have the skills to carry out.
[] Keepthe area around your appliance clean and dry to reduce the possibility of slipping.
[] DO NOToperate this appliance if it isdamaged, malfunctioning, partially disassembled,or has missing or broken parts
including a damaged cord or plug.
[] Unplug the appliance or turn off the circuit breaker before servicing. Pressingthe Power button DOESNOTdisconnect power.
[] See"Electrical Requirements" located in the Installation Instructions for grounding instructions.
SAVETHESE INSTRUCTIONS
2
www.Hotpoint.com
. PROPERINSTALLATION
_b This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
If you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.com or by calling
800.GE.CARES(800.432.2737).
Ensurethat the hot water hose is connected to the "H"
(internal red screened)valve and the cold water hose is
connected to the "C"(internal blue screened)valve.
Installor store where itwill not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate
the warranty.
Properlyground washer to conform with all
governing codes and ordinances. Followdetails
in Installation Instructions.
Toensure proper installation, run two small load size
Whites/Quick Wash cycles BEFOREwashing the first
load.
[] Thiswasher does not include water supply hoses.
GEstrongly recommends the use of factory specified
parts. A list of factory hosesavailable for purchase are
listed below. Thesehoses are manufactured and tested
to meet GEspecifications.
GEstrongly recommends the use of new water supply
hoses.Hosesdegrade over time and need to be
replaced every 5years to reduce the riskof hosefailures
and water damage.
Parts and Accessories
Order on-line at GEApplianceparts.com today, 24 hours a
day or by phone at 800.626.2002during normal business
hours.
Part Number
PM!4X!O002
Or
PM!4X!O005
Accessory
4 ft RubberWater SupplyHoses
4 ft Braided Metal Water Supply Hoses
. _WHEN NOT IN USE
[] Turn off water faucets to minimize leakage if a break
or rupture should occur. Checkthe condition of the fill
hoses;GErecommends changing the hoses every 5
years.
SAVETHESE INSTRUCTIONS
About the control panel.
. Add detergent
7
. Add items
, Select load size
• Select temperature
• Select wash cycle
• Select options
Step 4
. Close lid
. Pull knob
LOAD SIZE TEMPERATURE OPTIONS
m m m
Controls
Load Size (on some models)
Looselyloaditems inthe washer basket.Overloading may negatively impact wash performance. Adjustthe load size
accordingly.
Temperature (on some models)
Selectthe water temperature for the wash and rinse cycles.Alwaysfollow fabric manufacturer's care label or
instructions when laundering.
Options (on some models)
Fabric Softener and Power Rinse
Setthis option when planning to manually add fabric softener during the rinse cycle or when you use extra detergent
or bleach to clean heavily soiled items. It provides an enhanced rinse.
Wash Cycle-Cycle Selector Knob
Thechart belowwill help you match the wash cycle setting with your items. Thechart isranked from greatest to least
wash intensity.
Your washer may not have all these cycles.
Whites For heavy to lightly soiled cottons, household linens, work and play clothes.
(Regular Wash/Fast Spin)
Colors For non-colorfast clothes and blends and items that are labeled for cold wash.
(Regular Wash/Fast Spin)
Permanent Press Forwrinkle-free and permanent press items and knits.
(Pulsed/Fast Spin)
About washer features, www.otpointcom
Liquid Bleach Funnel
Thewater fill dilutes liquid chlorine bleach as the washer fillsfor the wash cycle.
_J Check clothing care labelsfor special instructions.
r21 ivleasureliquid bleach carefully,following instructions on the bottle.
[] Neverpour undiluted liquid chlorine bleachdirectly onto clothesor into the wash
basket.
[] Donot pour powdered bleachinto bleachfunnel.
r_ Before starting the washer, pour measured amount of bleach directly into bleach funnel.
Avoidsplashing orover-filling dispenser. Ifyou prefer to use powdered bleach,add it into
the wash basket with your detergent.
[] Donot mix chlorine bleachwith ammonia or acids such asvinegar and/or rust
remover.Mixing can produce a toxicgas which may causedeath.
The Agitator Cap (on some models)
Theagitator cop fits intothe top ofthe
agitator. If it accidentally comes off, simply
put it back on.
Liquid Fabric Softener (Manually add during rinse cycle)
rl1 TurnOptions knob to Fabric Softener (onmodlesso equipped).
NOTE:TheOptions knob should be turned to Fabric Softener.
r21 Measure liquid fabric softener carefully,following instructions on the bottle,and add during
the rinse cycle.
OFF
OPTIONS
Set when adding
FABRIC SOFTENER
cmd/or POWER RINSE
Fabric Softener Dispenser (on some models)
Thefabric softener dispenser automatically
releasesliquidfabric softener. Settingthe
knob ensures that it dispenses at the proper
time.
r-31Addwater to dispenser until it reaches
the maximum fill line.
Do not stop the washer or raise the lid
during the first spin. This will cause the
dispenser to empty too soon.
To use, follow these steps:
rllMake sure dispenser securely
is attached
to agitator.
r21 use only diluted liquid fabric softener.
Pour into dispenser,using amount
recommended on package.
Never pour fabric softener directly on items.
It may stain them.
Do not pour anything into the
agitator ifthe agitator cap or
dispenser is removed.
[_]Select Fabric Softener or Power Rinse
setting to activate the cycle.
Note: Fabric softener will not dispense ifthe
knob isin the "Off' position.
5
About the washer features
Separate for cleaning
Cleaning the Fabric Softener Dispenser (on some models)
_] Removethe dispenserfrom the top of the agitator.
r_ Separate the dispenser cup from the cover by grasping the top and pushing down on the
insideof the cup with your fingers. Dispensercup will pop free from the cover.
r_To clean the dispenser,soak both the dispenser cup and the dispenser cover in the
following solution:
[] ! USgallon (3.8liters)warm water
[] 2/4 cup (60ml)heavy-duty liquid detergent
[] ! cup (240ml)bleach
r_lf necessary,loosenbuildup with a clean,soft cloth after soaking.Do not usea stiff brush;
you may roughen the surface of the dispenser.
r_ Rinseand reassembledispenser. Placedispenserback on the agitator.
Q:What isthe difference between Heavy and Light settings?
A: ForWhites and Colors,the wash agitation time isincreased by 6 minutes and for Permanent Press,by 12minutes. (Timesare
approximate)
Q:What isthe difference between Regular and Pulsed7
A: Regular means the washer will continuously agitate during the wash cycle.Pulsed provides a more gentle wash cycle by
including pause periods during the wash cycle.
Q:Which cycle isbest for heavily soiled items?
A: Whites or Colors cycles havethe greatest wash intensity.This cycle provides the best overall cleaning. Permanent Press
should be usedfor wrinkle-free and permanent press items.
Q:How can I reduce linting?
A: Sortwash loads by fabric type and whether they collect lint (velveteen,corduroy) or produce lint (terry cloth, chenille).Wash
small loads for a shorter amount of time.
Q:How much detergent do Iuse?
A: Forbest performance, always follow the detergent manufacturer's instructions on usage. Many detergents are concentrated,
soconsult the product label and follow the clearly marked lines on the detergent measuring cups. Excessivedetergent can
negatively impact the wash performance.
Q:How does the selection of Power Rinse or Fabric Softener affect water usage of my washer?
A: Selectingthe Power Rinse or Fabric Softener feature will increase the amount of water used byyour washer during the rinse
cycle.Theadded water assistsin the proper dilution of fabric softener. Thequantity of water used in this cycle iscomparable
to the amount used in the initial fill.
6
Loading and using the washer.
Always follow fabric manufacturer's core label when laundering
WashLoads
Sort by co!or (whites,lights,colors),soillevel,fabric
type(sturdy cottons, easy care, delicates)and
whether the fabric produces lint (terry cloth, chenille)
or collects lint (velveteen,corduroy).
www.Hotpoint.com.
- Fire Hazard
Neverplace items in the washer that are dampened with gasoline or other flammable liquids.
Nowasher can completely remove oil.
Donot dry anything that has ever had any type of oil on it (including cooking oils).
Doingsoso can result in death, explosion,or fire.
Pro ent
Add detergent before adding items sothat the
detergent can work effectively. Usingtoo little or
too much detergent isa common cause of laundry
problems.
Forspots, apply pre-treatment to items as
recommended on the product label.Application
should be made in the basketto prevent overspray
which may cause the coloring on the lid or graphics
to fade.
Youcan uselessdetergent if you have soft water, a
smaller load or a lightly soiled load.
When using high efficiency or concentrated
detergents, consult the product labelto determine
amount required for optimum performance.
Excessivedetergent will negatively impact wash
performance.
Loa i ems,oose, in W en
_ v loading wet items,make sure you set the load/water
v, level high enough to allow the items to move freely.
Water level shouldjust cover the items.Toadd items
after washer has started, lift the lid and submerge
additional items next to the agitator.
[] Donot wrap long items likesheetsor pants around
the agitator.
[] Donot wash fabrics containing flammable
materials (waxes,cleaning fluids,etc).
[] Washer will not agitate orspin with the lid up,
however the timer will continue to run.
Care and cleaning of the washer.
| 88
Wash Basket: Leavethe lid open after washing to
allow moisture to evaporate. If you want to clean the
basket,usea clean soft cloth dampened with liquid
detergent; then rinse.(Do not use harsh or gritty
cleaners.)
Fill Hoses: Hotpoint recommends changing the hoses
every 5years.
Exterion Immediately wipe off any spills.Wipe with
damp cloth. Try not to hit surface with sharp objects.
Moving and Storage: Ask the servicetechnician to
remove water from drain pump and hoses. Seethe
Installation Instructions packed with product for
information on how to reinstall the shipping rod to
keepthe tub stationary when moving the washer.
Formore information, visitwww.Hotpoint.com or
call800.GE.CARES(800./432.2737).Do not store the
washer where it will be exposed to the weather.
Long Vacations: Besurewater supply isshut off at
faucets. Drainall water from hosesif weather will be
below freezing.
8
Notes.
www.Hotpoint.com
O"
2
O"
v
0
0
v
0
Lf_
Q
9
Before you call for service...
_ roubleshooting Tips
Save time and money! Review the charts on the following pages,
or visit www.Hotpoint.com. You may not need to call for service.
WATER Possible Causes What To Do
Toomany suds Too much detergent , Measureyour detergent carefully. Use lesssoap ifyou have
soft water, a smaller loador a lightly soiled load.
Type of detergent , Switch to a lower sudsing detergent brand and follow
instructions on package.
Soft water , Try lessdetergent.
Water leaks Usingtoo much detergent , Uselessdetergent. Uselesssoap if you have soft water,
in washer a smaller load or alightly soiledload.
Fillhoses or drain hose is , Makesure hose connections aretight at faucets and
improperly connected rubber washers are installed. Makesure end of drain hose
iscorrectly insertedin and securedto drain facility.
Household drain may , Checkhousehold plumbing. You may need to call
be clogged a plumber.
Drain hose loose , Makesure drain hose is fully seated inbuck of washer and
that the two retaining screws are fully seated.
Drain hose rubs on wall , Makesure drain hose doesnot make contact with the wall.
Nay cause excessivewear on the hose.
Constant water pressure , Tighten hosesat the faucets and turn the water off after
to the fill hoses at the each use.
water source , Checkcondition of the fill hoses;they should be replaced
every 5years.
Water temperature Cooler water temperatures , New laundry detergents have been formulated to work
seems incorrect provide improved energy with cooler water temperatures without affecting wash
efficiency performance.
Water supply is turned off , Turn both hot and cold faucets fully on and makesure
or improperly connected hosesareconnected to correct faucets.
Water valve screens ere , Turn off the water source and remove the water connection
stopped up hosesfrom the upper backof the washer. Useabrush or
toothpick to clean the screens in the machine. Reconnect
the hosesand turn the water back on.
House water heater is , Hake sure house water heater is delivering water at
not set properly 120°F-140°F(48°C-60°C).
Water pumped out before Lid lifted or cycle was put in , Resetcycle.
cycle is complete pause for over 24 hours
Water won't drain Drain hose is kinked or , Straighten drain hose and makesure washer isnot
improperly connected sitting on it.
Topof drain outlet should be lessthan 6 ft (1.8m)
above floor.
Washer pauses during This is normal , Thisis normal. The washer alternates between agitate and
wash cycle soak during some wash cyclesto get your clothes cleaner with
lesswear.
Washer pauses during This is normal , The washer may pause during the spin cycle to remove
spin cycle soapy water more efficiently.
10
Loading...