Garmin GPSMAP 5012, GPSMAP 5015, GPSMAP 5208, GPSMAP 520S, GPSMAP 5212 Quick Reference Manual
...
Finding a Marine Service and Navigating to It
Marking a Waypoint
To nd a marine service from your current location:
1. From the Home screen, touch Where To?.
2. Touch the marine service category to which you want to navigate. The unit shows the list of the
50 nearest locations and the distance and bearing to each.
3. Touch the marine service item to which you want to navigate. A screen containing information
about the selected marine service appears.
4. Touch Navigate To > Go To. (Or, touch Guide To when using a preprogrammed BlueChart g2
Vision card to use Auto Guidance.)
5. Follow the colored line on the screen to the destination.
List of Marine Service Items
Go to Destination
Navigating to a Destination on the Chart
To mark your current location as a waypoint:
1. From the Home screen, touch Mark.
2. Touch Edit Waypoint to designate a specic name, symbol, water depth, water
temperature, or position.
To create a new waypoint:
1. From the Home screen, touch Charts > Navigation Chart.
2. Touch the location you want to designate as a waypoint.
3. Touch Create Waypoint.
Navigation Chart
Create Waypoint Screen
Editing or Deleting a Waypoint
GPSMAP® 5000 Series
quick reference guide
To navigate to a destination on the chart:
1. From the Home screen, touch Charts > Navigation Chart.
2. Touch the point on the chart to where you want to navigate. A pointer ( ) marks the point.
3. Touch Navigate To.
4. Touch Go To to navigate directly to the location, or touch Route To to create a specic route to
the location.
5. Follow the line on the Navigation Chart to the destination.
Navigation Chart
Follow the Route
To edit a waypoint:
1. Touch the waypoint on the navigation chart.
2. Touch the button for the waypoint you want to
edit.
3. Touch Edit Waypoint.
4. Touch the waypoint attribute you want to change
(Name, Symbol, Depth, Water Temp, or
Position).
To delete a waypoint:
1. From the Home screen, touch Information >
User Data > Waypoints.
2. Touch the waypoint you want to delete.
3. Touch Delete.
Edit or Delete a Waypoint
Turning the Unit On and Off Creating and Editing Routes
Using the Man OverBoard Feature
To turn the unit on:
1. Press and release the Power key.
2. When the warning screen appears, touch I Agree.
To turn the unit off:
Press and hold the POWER key.
If one chartplotter is connected, the unit shuts down.
If multiple chartplotters are connected, a prompt asks
if you want to turn off the entire system. Touch Yes to
turn off the entire network, or touch No to put the unit in sleep mode.
WARNING: See the Important Safety and Product Information guide in the product box for
product warnings and other important information.
Adjusting the Backlight and Color Mode
To adjust the backlight level:
1. While the unit is on, press and release the Power key.
2. Touch Backlight.
3. To allow the unit to automatically adjust the backlight based on ambient light, touch Auto.
To manually adjust the backlight, either
touch and drag the brightness bar or
touch and hold Up or Down.
To adjust the color mode:
1. Press and release the Power key.
2. Touch Color Mode.
3. Touch Day Colors, Night Colors, or Auto.
To mark a Man Overboard location:
1. From the Home screen touch Man Overboard. A message appears asking if you want to
begin navigation to the MOB (Man Overboard).
2. Touch Yes to begin navigating to the Man
Overboard location.
OR
From the Home screen, touch Mark > Man
Overboard.
To delete a Man Overboard location:
1. From the Home screen, touch Information > User
Data > Waypoints.
2. Touch the Man Overboard location you want to delete.
3. Touch Delete.
Man Overboard
Using Combination Screens
To access and change screen combinations:
1. From the Home screen, touch Combinations >
Unused Combo (if one is available).
OR
While viewing a Combinations screen, touch
Menu > Change Combination.
2. Touch Num Functions to change the number
of combination screens (1-4). Touch Layout to
switch to a horizontal or vertical layout. Touch
Data Bar to toggle the data bar on or off. Touch a combination screen button to select the
screens to view. (When you select the combination screens to view, you will only be able
to select from the options available to your unit.)
3. Touch Done.
Combination
screen 1
Combination
screen 2
Data bar
Select the number of
combination screens
Change to vertical
or horizontal layout
Toggle the data bar
Change combination
screen 1
Change combination
screen 2
To create a route from your present location:
1. From the Navigation Chart, touch your destination. The destination is indicated by .
2. Touch Navigate To > Route To.
3. Touch the location where you want to make the last
turn toward your destination.
4. Touch Add Turn.
5. To add additional turns, continue to touch the location
where you want to make a turn (working backward
from the destination) and then touch Add Turn.
6. Touch Done to nish the route or touch Cancel Route
to delete the route.
To create a route in another location:
1. From the Home screen, touch Information > User
Data > Routes > New Route.
2. Touch the route’s starting point. The starting point is
indicated by .
3. Touch Add Turn.
4. Touch the location of the rst turn.
5. Touch Add Turn. Repeat until the route is complete.
To edit a route:
1. From the Home screen, touch Information > User Data > Routes.
2. Touch the route to edit.
3. Touch Edit Route. You can edit the route name, turns, or delete the route.
Routes Screen Route Information
Please visit www.garmin.com for additional documentation and information.
January 2008 Part Number 190-00803-01 Rev. B Printed in Taiwan
Loading...