Garmin 01204 Users Manual

Garmin 01204 Users Manual

RF Remote

owner’s manual

For Use with GPSMAP 4000/5000 Series Chartplotters

190-00856-00_0A.indd 1

6/22/2007 1:05:28 PM

© 2007 Garmin Ltd. or its subsidiaries

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.

Garmin® is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. GPSMAP® is a trademark of Garmin Ltd. or its subsidiaries. This trademark may not be used without the express permission of Garmin.

Refer to your chartplotter owner’s manual or product information sheet to view the warranty, warnings, cautions, and the software license agreement.

Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.

June 2007

Part Number 190-00856-00 Rev. A

Printed in Taiwan

190-00856-00_0A.indd 2

6/22/2007 1:05:28 PM

Introduction

Introduction

The 4000/5000 Series RF Remote is for use with the following Garmin chartplotters:

GPSMAP 4008

GPSMAP 5008

GPSMAP 4012

GPSMAP 5012

GPSMAP 4208

GPSMAP 5208

GPSMAP 4212

GPSMAP 5212

The remote is used to control the 4000/5000 screens. It can be used up to 10 meters (32 feet) from the chartplotter and does not need to be pointed directly at your chartplotter.

The remote operates on 2 AAA batteries (not included). To replace the batteries, use a small Phillips screwdriver to open the access cover on the rear panel. Use alkaline batteries for best results.

RF Remote Owner’s Manual

 

190-00856-00_0A.indd 1

6/22/2007 1:05:28 PM

Loading...
+ 5 hidden pages