Furuno FI-3003 OPERATORS MANUAL

Page 1
012
Page 2
Page 3
Page 4
FI-30 Wind transducer
Thank you for choosing a FURUNO product. Through this manual we would like to help you to install your new FURUNO product. Please read through this manual carefully before starting your installation. This unique wind transducer provides both wind speed and wind angle relative the boat. If a Speed transducer is connected to the system, true wind speed and angle is computed. In addition, a compass or GPS antenna may be used to compute true wind direction relative North
1.1 Location
The transducer should be mounted on a horizontal surface in the mast head. If the masthead is not horizontal a shim has to be added. An 15 shim for Selden masts is available. The wind transducer is using optical sensor technology performing digital PWM output. This technique provides high accuracy angle and wind speed measurements.
2 Part specification
1# Calibration certificate 1# Wind transducer with 25 m cable 1# Bracket 5# Cable protectors (0,25 mm)
3 INSTALLATION
The transducer permits any type of horizontal mounting angle.
Mount the unit by directing the pipe (1) down and backwards in the bracket (2). Secure the nut (3) towards the attachment BY HAND (tools can be needed when demounting). Attach the security clamp (4) behind the nut. The wind transducer connects to the FI-30 Server.
3
Page 5
4 Electric installation
4.1 Connections to the FI-30 Server
If you already have a Nexus Network i.e. a Server, it is more practical to connect the transducer to the Server due to the single instrument cable installation. Note, set C71 OFF (see Multi Control Manual)
Server
Transducer
4.2 Installing cable
The power cable is connected via a 3A fuse from the battery or at the boats fuse panel and direct to the instrument or Server. One red and one black power wire is included.
Note, set C71 On (see Multi Control Manual) Always connect a 3 AMP fuse between Power supply and instrument.
4
Page 6
5 Specifications
Transducer cable 25 m Power suppIy 12V DC (10-16V) Power consumption 0.25 W Wind speed range 0.9-90 knots, 0.5-50 m/s Angle Accuracy Better than ± Speed Accuracy 5% Temperature range Operating -5°C to +70°C
Storage -20°C to +80°C
Weight 260 g.
5.1 Dimensions:
5
Page 7
6
Page 8
22346-1 Edidtion 1
7
Loading...