Furuno FI-30 User Manual

1

234

Introduction

Thank you for choosing an analog FI-30 instrument. We are convinced that you will
appreciate all the valuable information either you are a cruiser or a racer. It is important
that you are following this instruction regarding installation and operation.

The functions of the analog instrument are repeating information from data computed
in the FI-30 Server. Most analog instruments are just repeating the data and no
settings are required. For FI-30 Steer Pilot and Trim instrument, the settings are made
in the Digital instruments. For how to set these, see the manual for the digital
instrument.
The FI-30 Analog Wind, you may select it to display true or apparent wind angel. That
setting is done from a digital instrument (see calibration code C52 in Multi Control
Manual).

1 Part specification ..................................................................................................1

2 Installation.............................................................................................................4

2.1 Installing the instrument .................................................................................5

3 Technical Data.......................................................................................................7

4 Maintenance ..........................................................................................................7

5 Drill template .........................................................................................................8

6 Optional Accessories............................................................................................9

7 Abbreviations ......................................................................................................10

5