Rotors F-45-72-8 and F-45-48-11 – Instructions for Use
These Instructions supplement the Concentrator plus/Vacufuge® plus operating manual. They
do not replace it. Be sure to read the operating manual before you begin to use the rotor. The
current operating manual version is available on the Internet at www.eppendorf.com.
Rotor Feet
When the rotor feet are mounted, you can set
the rotor down on the workbench without
forcing the tubes out of their holes.
These rotor feet can remain mounted during
centrifugation.
▲
Screw the three rotor feet onto the rotor at
the holes provided.
Sandwich Operation
You can stack two of these rotors in any combination, with a spacer sandwiched between them,
and centrifuge with both at the same time.
When using in combination, the maximum load is reduced:
Lower rotor: 2/3 of nominal maximum.
•
Upper rotor: 1/3 of nominal maximum.
•
Ordering Information
Order No.
Rotor F-45-72-8
Rotor F-45-48-11
Spacer for operating two rotors simultaneously
for F-45-72-8 and F-45-48-11
Rotor feet for F-45-72-8 and F-45-48-11
, 72 places for 0.5 ml test tubes 5490 034.007 022822080
, 48 places for 1.5/2.0 ml test tubes 5490 030.001 022822004
, set of 3 5490 030.800 022830520
International
5301 316.005 022822101
In touch with life
Your local distributor: www.eppendorf.com/worldwide
Eppendorf AG · Germany · Tel: +49 40 538 01-0 · E-Mail: eppendorf@eppendorf.com
Eppendorf North America, Inc. · USA · Toll free phone: +1 800 645 3050 · E-Mail: info@eppendorf.com
Application Support
Europe, International: support@eppendorf.com · North America: support_na@eppendorf.com
Asia Pacific: support_asiapacific@eppendorf.com
Order No.
North America
eppendorf is a registered trademark.
5490 030.818-04/0708 · Printed in Germany