Dyson Airblade V Owner's Manual

0 (0)

Owner’s manual

Manual del propietario

Free 5 year parts and 5 year limited labor warranty Register your warranty at www.dysonairblade.com

Garantía de 5 años para las piezas y garantía limitada de 5 año para la mano de obra Registre su garantía en www.dysonairblade.com

THANK YOU FOR CHOOSING TO BUY A DYSON AIRBLADE V HAND DRYER

Dyson customer care

Your hand dryer is covered for 5 years from the date of purchase, subject to the terms of the limited warranty.

If you have any questions about your hand dryer, call the Dyson Helpline at 1-888-DYSON-AB with your serial number and details of where and when you bought the unit.

Note your serial number here for future reference.

Your serial number can be found on the rating plate which is behind the grille inside the cover of the unit, on a registration sheet in the box, and also on an information sticker on the front of the unit when it is unpacked.

This illustration is for example purposes only.

WARNING

A comprehensive installation guide is enclosed with the hand dryer packaging. This contains detailed information on the correct installation of the unit, which MUST be adhered to completely, including routing of electrical cables. Damage caused by incorrect installation is not covered by your warranty. Dyson recommends a 15 amp circuit breaker with a dedicated line and neutral. Contact a qualified electrician to determine the specific requirements for your particular installation. Installation work and electrical wiring MUST be done by a qualified electrician in accordance with all applicable laws, codes, and standards.

The instructions in this manual and the installation guide must be followed completely, as failure to do so may result in incorrect operation, damage to property, and/or personal injury.

Dyson will not be held liable for any damage to property or personal injury, or any loss of business or revenue, if you, your staff, your installer, or service engineers have not followed the instructions given in this manual and the installation guide.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE INSTALLING OR USING THIS UNIT READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS mANUAL AND THE INSTALLATION GUIDE

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.This unit is not intended for use by persons (including children) with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the unit by a person responsible for their safety.

2.Do not allow the hand dryer to be used for any purpose other than drying hands. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

3.Before servicing, switch the power off at the service panel. Ensure the switch is locked to prevent the power from being switched on accidentally. If the means of switching off the power cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

4.Children should be supervised to ensure that they do not play with the unit.

DO NOT USE ANY PRESSURE WASHING EQUIPMENT FOR CLEANING ON OR NEAR THIS UNIT.

WARNING

To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Appliance With Any Solid-State Speed Control Device

WARNING: RISK OF ELECTRIC SHOCK!

All electrical repair work must be done by qualified electrician(s) or Dyson Service Engineers in accordance with all federal, state and local laws and applicable codes and standards, including fire-rated construction. If casing is removed or handled improperly the internal components of the unit may cause harm or become permanently damaged.

CAUTION

Your hand dryer should be located indoors. Operating temperature range 32°F (0°C) to 104°F (40°C). To reduce the risk of fire or electric shock, do not expose the internal mechanisms/components of this unit to moisture.

WARNING:

This unit contains substances known to the state of California to cause cancer, birth defects and other reproductive harm. Wash hand after installation or repair of this unit.

READ AND SAVE THESE INSTRUCTIONS

Looking after your hand dryer

How to use

1.Place your hands beneath the hand dryer and it will start automatically, creating sheets of air to scrape water from your hands.

2.Move your hands backwards and forwards slowly through the air, turning them over so both back and front are exposed to the airflow.

Troubleshooting Guide

WARNING: Risk of electric shock.

Problem	Solution

The hand dryer fails to start.	Check fuse/circuit breaker is working and that the
	power supply is connected. Must be performed by a
	qualified electrician.
	If a safe method of switching is available, turn the
	unit on and off. If a safe method is not available, a
	qualified electrician must perform this task.
The hand dryer sometimes cuts out	Check the air inlets are clean and free of dust. If the
when in use but resumes operation	air inlets are dusty or dirty simply remove the dust or
after a period of time.	debris with a soft cloth.
The dry time of the hand dryer has	Inspect the air inlets for dust and remove.
increased.
The air flow from the hand dryer is	Inspect filter and change if required.
running hotter than usual.

If you have any further questions please contact the Dyson Helpline at 1-888-DYSON-AB.

Cleaning

The hand dryer should be cleaned daily.

Follow these 3 simple steps to ensure the unit performs to its best and remains hygienic. Using the wrong cleaning method or product may invalidate your warranty.

1.Wipe all surfaces with a soft cloth and non-abrasive cleaning products.

2.Clean the air inlets on the sides REGULARLY.

3.Clean the floor and wall beneath and around the unit. This may be required more regularly in high use areas.

General advice

All cleaning chemicals should be used exactly as indicated by the manufacturer’s instructions (including appropriate dilution).

If a cleaning product is left on the machine for too long, a film will form. This may reduce the effectiveness of the anti-microbial surfaces.

Any chemicals intended for use should first be tested on an inconspicuous area to confirm suitability.

Aside from cleaning chemicals, care should be taken to avoid any harmful fluids from coming into contact with the unit, in particular oils and alcohol-based products.

Chemical guidelines

Many professional cleaning chemicals can be used. The following are some that are harmful to the unit and should not be used. Use of these will invalidate your warranty.

Do not use:

Alcohol-acid mixes Alcohol

Solvent /oil-based products Quaternary ammonium Alkali-bleach mixes Foaming ingredients Bleach or abrasive cleaners

Do not pressure wash

Water guidelines

This hand dryer has an IP24 certification.

Use of pressure washers can force water inside the casing. Water damage caused by incorrect cleaning will invalidate your warranty.

FILTER MAINTENANCE/AIR INLET

Regularly check the air inlets to ensure that they are free from dust and debris. Simply wiping the inlets with a soft cloth should be sufficient to remove dust and debris.

If the air inlets get clogged, further cleaning or a filter change might be required.

If required for high usage environments, a Dyson filter change kit provides everything needed to change your unit’s HEPA filter on site. Contact the Dyson Helpline at 1-888-DYSON-AB for more information.

Filter cleaning or replacement for your hand dryer can be carried out by carefully following the instructions given in the filter change kit. If in any doubt, consult a qualified electrician or contact the Dyson Helpline at 1-888-DYSON-AB for support.

SERVICING

If your hand dryer needs servicing, please call the Dyson Helpline at 1-888-DYSON-AB. Also visit the website at www.dysonairblade.com

Disposal information

Please dispose of this product responsibly and recycle where possible.

CONFORMITY STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, notwithstanding use by the general public in commercial, business and industrial environments. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

PLEASE REGISTER AS A DYSON AIRBLADE V HAND DRYER OWNER

To help us ensure you receive prompt and efficient service, please register your unit at www.dysonairblade.com

This will register your warranty, confirm ownership of your Dyson unit in the event of an insurance loss, and enable us to contact you if necessary.

Please ensure all instructions and guidance in this operating manual and the installation guide are adhered to or your warranty may be invalidated.

YOUR LIMITED WARRANTY

Terms and Conditions of the Dyson 5 year parts warranty and 5 year limited labor warranty covering the backplate.

If you have registered your unit online, your warranty will start from the date of purchase. Please retain your proof of purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture, according to Dyson’s records.

This warranty will be void if the unit is installed and used in a country outside the one in which it was sold.

What is covered

5 YEAR parts WARRANTY

All factory parts of your Dyson hand dryer are warrantied against original defects in materials and workmanship when used in accordance with the owner’s manual and installation guide for a period of 5 years from the start of your warranty. You will need to return any defective parts to Dyson using the pre-paid postage box provided. Any replaced parts must be returned to Dyson or an administration fee will be charged. Please call the Dyson Helpline at 1-888-DYSON-AB for more information.

Where Dyson determines that the main body assembly needs replacement, Dyson will send a replacement to be fitted by you. Dyson may send you refurbished parts under this limited warranty. Refurbished parts are parts that have been returned to Dyson. Dyson ensures that refurbished parts meet all quality standards by conducting comprehensive inspections before they can be reutilized, and such parts are covered for the remaining period of this limited warranty.

•Any parts which are returned and replaced by Dyson will become the property of Dyson.

•The replacement of any part of your unit under warranty will not extend the period of warranty.

•The warranty provides benefits which are additional to and do not affect any statutory rights you may have as a consumer. This limited warranty gives you legal rights, and you may have other rights which vary from state to state.

5 YEAR LIMITED LABOR WARRANTY COVERING THE BACKPLATE

In instances where there is an original defect in the backplate, Dyson will, for five years from the start of your limited warranty, repair or replace the backplate with no labor charge. After this, standard labor charges will apply. Warranty service must be performed by Dyson or a Dyson authorized service agent. Please call the Dyson Helpline at 1-888-DYSON-AB for more information.

+ 8 hidden pages