Druck DPM Data sheet

DPM

DIGITAL PRESSURE MODULE

VENTED GAUGE OR ABSOLUTE

DPM-0.1 -0.1 to 0.1 bar (1.5 PSI)
DPM-1 -1 to 1 bar (15 PSI)
DPM-2 -1 to 2 bar (30 PSI)
DPM-5 -1 to 5 bar (75 PSI)
DPM-10 -1 to 10 bar (150 PSI)
DPM-20 -1 to 20 bar (300 PSI)
DPM-25 -1 to 25 bar (360 PSI)
DPM-40 -1 to 40 bar (600 PSI)

SEALED GAUGE

DPM-70 0 to 70 bar (1000 PSI)
DPM-100 0 to 100 bar (1500 PSI)
DPM-200 0 to 200 bar (3,000 PSI)
DPM-350 0 to 350 bar (5,000 PSI)
DPM-700 0 to 700 bar (10,000 PSI)
DPM-1000 0 to 1000 bar (15,000 PSI)

The DPM is an intelligent module which contains a pressure transducer,

temperature sensor, analogue to digital converter, microprocessor and the

necessary calibration data stored during DPM calibration. During operation

the DPM sends pressure and temperature related information digitally to a

PC or can output data directly to a printer at preset intervals.

• Pressure Measurement Range

-1 to 1000 bar (15000 psi)

• Menu-Driven Software to Produce
Calibration Certificates

• Maximum, Minimum, % of Set Limits and
Tare Value Display Functions

• DPM Temperature Measurement

• Leak Rate Measurement 1 Second to 999 Days

• Timed/Event Data Logging on a PC or Printer

• Zero & Span Calibration Facility Using PC

SPECIFICATIONS

PRESSURE RESOLUTION 6 Digits

OVERLOAD PRESSURE 10% FS. Warning is flashing display

PRESSURE UNITS bar, mbar, MPa, kPa, lb/in2, kg/cm2, atm, inH20, mH20, mmH20, inHg, mmHg

TEMPERATURE DISPLAY Temperature of pressure sensor (Accuracy: ±0.5ºC)

OPERATING TEMPERATURE 0 to 40°C (32 to 104°F)

CALIBRATED TEMPERATURE RANGE 10 to 40°C (50 to 104°F)

TEMPERATURE EFFECTS 0.001% of reading / ºC between 10 to 40ºC

ZERO RESET Manual - Via PC

PRESSURE MEDIA Water, Oil, Non-corrosive gases (For other media contact TTI)

HUMIDITY 5 to 95% relative humidity non-condensing

RESOLUTION SELECT Increase or decrease by a factor of 10 - via PC

COMMUNICATION RS232 (9 pin D-type connector)

POWER SUPPLY 9V (50 mA) Power Supply Unit (supplied)

DIMENSIONS 4.1 x 1.8 x 1.8 in. (105 x 45 x 45mm), 3.3 ft (1m) cable

WEIGHT Approx. 0.8 lb. (370 grams)

MATERIAL Aluminum / Stainless Steel

PRESSURE CONNECTIONS 3/8”BSP male ‘quick-fit’ / 1/4”BSP or 1/4”NPT male (pneumatic),

3/8”BSP female ‘quick-fit’ / 3/8”BSP or 3/8”NPT male (hydraulic)

SOFTWARE (SUPPLIED) Allows the user to control and monitor the DPM remotely through a virtual

instrument panel on the computer screen. The data can be logged, viewed
and printed in graphical or in a calibration certificate format

* Alternative pressure ranges are available to special orders.

ORDERING INFORMATION

DPM-X* Digital Pressure Module $ 995

* X = Pressure range

Information subject to change without notice. Prices in USD. V044.6