Review Package Contents
Make sure that the package contains the following items. If any items are missing, please contact the reseller.
§D-Link DSC-350F
§Drivers and Software on CD-ROM
§USB Cable
§Hand Strap
§Manual
§Carrying Case
§Camera Stand
§2 x AA Batteries
§Q.I.G
Driver Installation
Note:
You must install the drivers from the CD before connecting the DSC-350F to your computer. Do not connect the
DSC-350F to your computer until told to do so in this guide.
§Remove the Driver CD from the package and insert it into your CD-ROM drive.
§An Autorun screen will appear on your screen. Click on “Install DSC-350F TWAIN Driver” from the list.
§Follow the on-screen instructions until you are prompted to restart the computer. Click on “Finish” to restart your computer.
Note for Windows XP or 2000 users : You may be prompted by a
“Digital Signature Not Found” screen. Press the “Continue” button to
continue.
Connect the DSC-350F to your Computer
§After your computer has restarted, remove the USB cable from the package and connect one end to your computer and the other end to the DSC-350F.
§Windows will now detect the DSC-350F and load the appropriate drivers. If Windows does not load the drivers, start again at #2.
Windows XP Instructions
§Users of Windows XP will need to follow these instructions to complete the driver installation
§When the “Found New Hardware Wizard” starts, press “Next” to continue.