D-Link DPH-10U User Manual

0 (0)
DPH-10U VoIP USB Phone
Quick User Guide
Version 1.0
TABLE OF CONTENTS
DPH-10U LEDS .................................................................................... 12
7.1
7.2 TESTING DPH-10U.................................................................................12
8.1
OVERVIEW..............................................................................................15
8.2 SYSTEM .................................................................................................15
8.3 MAPPING MODE......................................................................................16
8.4 SKYPE MODE ......................................................................................... 16
8.5 EXIT....................................................................................................... 16
2
1. Introduction
This is a sleek powerful tool and easy to carry USB phone. It has USB port to connect into PC, and it allows you communicate with others through internet. It includes other features to enhance internet voice chat futures, because it has same ability as USB phone such as portable and easy to use, and you can use it for PC to PC or PC to Phone; along with crystal clear voice communication with minimize noise. It has phone’s look but it is best to use for family, office or SOHO
2. Package Contents
The DPH-10U package includes the following (note that your particular hardware and cables may look slightly different than shown below).
1. DPH-10U
2. USB Cable
3
3. Requirements
In order to install the DPH-10U VoIP USB Phone you will need the following:
1. DPH-10U VoIP USB Phone
2. PC with the following minimum specifications:
o Pentium 400MHz or equivalent o Windows 2000 or XP o Available USB port (1.0, 1.1 or 2.0) o Skype™ version 1.1.079 or higher (www.skype.com) must be installed o 128MB RAM o 10MB available hard disk space o CD-ROM drive to install DPH-10U software from the supplied
CD-ROM
4. DPH-10U Installation
The following instructions will guide you to through the process of installing the DPH-10U VoIP USB Phone.
The installation procedure is to:
Install Skype™ (step 1 below)
Plug in the DPH-10U WHEN INSTRUCTED TO DO SO (step 2 below)
Start the DPH-10U software installation (step 3 below)
Following the installation is OK (step 3 below)
Use your DPH-10U to make Skype™ calls
The detailed instructions follow:
STEP 1: If Skype™ is not already installed on your computer, visit
http://www.skype.com and follow the instructions there to install Skype™. Verify
that Skype™ is working before installing the DPH-10U.
STEP 2: Connect the DPH-10U USB port as shown below.
You will see the following popup. Press Yes to proceed or No to cancel.
Connect to PC Connect to NB
4
STEP 3: Insert the supplied CD-ROM into your PC CD-ROM drive. The
installation should start automatically. Please press “Software(Utility)”.
STEP 4: You will see the following popup. Press Next to proceed or cancel
to stop the install processes.
STEP 5:
You press the Install and stare to install the DPH-10U Utility.
5
STEP 6: You will see the following progress bar below indicating that the
installation is proceeding.
STEP 7: The program installing audio driver. Press Next.
STEP 8: You will see the driver install path. Press Next
6
Loading...
+ 14 hidden pages