D-Link DGS-1008P/E Product Data Sheet

Switching | DGS-1008P
1
DGS-1008P
8-port PoE Gigabit Desktop switch
dlink
Key features:
Plug and Play operation
4 PoE ports
Gigabit speed
Non-blocking architecture: simultaneous full
speed on all ports
Fanless, silent operation to t in any
Quality of Service (QoS) queues for trac
prioritisation
Cable diagnostics function to help
troubleshoot wiring problems
Safety function to prevent PoE overloads,
protects both the switch and the connected PoE devices
Green Ethernet technology, saves energy
and increases the product’s lifespan
High-Speed Networking
Transfer les over your network at blazing Gigabit speeds
Plug And Play
Auto MDI/MDIX simplies cable connections
PoE
Power up to 4 Wireless Access Points or other PoE-capable devices
The DGS-1008P PoE Gigabit Desktop switch provides a cost-effective way for office users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones. It also provides the opportunity to add additional Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. This compact PoE switch is equipped with Gigabit ports for faster speeds and operates quietly, making it ideal for use in virtually any room or office. In addition, D-Link’s Green Ethernet technology saves power when the switch is active and inactive.
Plug and Play Power over Ethernet (PoE)
The first four ports of the DGS-1008P support the IEEE 802.3af PoE standard. Each of these four ports can supply up to 15.4 Watts, making it a very convenient solution for applications that are far away from power outlets, or when it is necessary to minimise the clutter of extra power supplies. The switch will automatically detect the power that a connected PoE device requires so no configuration is needed. A failsafe mechanism will cut off the power in case of an unexpected PoE overload, protecting both the switch and the connected device.
Cable diagnostics function
Every time the DGS-1008P is powered up, it runs a micro diagnostics routine to check the integrity of the connected Ethernet cables. If a failure is detected, the switch will flag it by means of its front panel LEDs, making it easy for the user to troubleshoot wiring problems.
QoS (Quality of Service)
Despite being an unmanaged, Plug and Play switch, the DGS-1008P is able to classify network traffic by assessing the existing
802.1p and DSCP fields in the Ethernet frames and IP packets respectively, and forward traffic from its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality.
Auto MDI/MDIX crossover
All ports support automatic MDI/MDIX crossover, eliminating the need for crossover cables or uplink ports. Each port can be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables.
Power-saving technology
The DGS-1008P 8-Port Gigabit Switch makes use of D-Link Green™ eco-friendly technology, providing energy savings, reduced power consumption, and a longer product life without sacrificing operational performance or functionality. This switch helps to conserve energy through methods such as Link Status and Cable Length Detection. The Link Status feature automatically powers down ports that have no activity on their links, allowing the switch to save substantial amounts of energy by cutting power for unused ports or ports connected to computers that have been shut down. It can also detect connected cable lengths, and adjust power usage accordingly, helping you save energy without affecting networking performance. In addition, the fan-less design extends the product’s lifespan and also reduces noise.
Switching | DGS-1008P
Technical Specifications
2
What this product does
The DGS-1008P offers an economical way for businesses to benefit from the increased bandwidth of Gigabit Ethernet. It provides 8 Gigabit ports for fast server deployment to meet increasing network loads. The Gigabit PoE ports provide a larger bandwidth for high speed network applications, especially IEEE 802.11n Access Points, high resolution video cameras, and IP phones.
Your Network Setup
Key Features
8 10/100/1000 Mbps Gigabit Ports
Auto MDI/MDIX Crossover for all ports
Store-and-forward Switching Scheme
F
ull/half-duplex for Ethernet/Fast Ethernet
Speeds
IEEE 802.3x Flow Control
Plug-and-play Installation
Built-in D-link Green Technology
RoHS Compliant
EEE 802.1p QoS (4 Queues, Strict Mode)
Supports Cable Diagnostics
Supports 9720 KBytes Jumbo Frames
Switching Capability
16 Gbps
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
ANSI/IEEE 802.3 NWay Auto-negotiation
IEEE 802.3x Flow Control
IEEE 802.1p QoS
PoE Features
Supports IEEE 802.3af
Supplies power to PD: up to 15.4 Watts
Total PoE budget: 52 Watts
P
oE port count/Average PoE watts per port:
4 (Port 1 - 4) / 13 Watts
Topology
Star
Media Interface Exchange
Auto MDI/MDIX adjustment for all ports
Network Cables
10BASE-T:
UTP CAT 3/4/5/5e (100 m max.)
EIA/TIA-586 100-ohm STP (100 m max.)
100BASE-TX, 1000BASE-T:
UTP CAT 5/5e (100 m max.)
EIA/TIA-568 100-ohm STP (100 m max.)
LED Indicators
Per port: Link/Activity/Speed/PoE Status
Per device: Power/PoE Max
Transmission Method
Store-and-forward
MAC Address Table
4K Entries per device
MAC Address Learning
Automatic update
Packet Filtering/Forwarding Rates
Ethernet: 14,880 pps per port
Fast Ethernet: 148,800 pps per port
Gigabit Ethernet: 1,488,000 pps per port
Data Transfer Rates
Ethernet:
10 Mbps (half duplex)
20 Mbps (full duplex)
Fast Ethernet:
100 Mbps (half duplex)
200 Mbps (full duplex)
Gigabit Ethernet
2000 Mbps (full duplex)
RAM Buffer
192 KBytes per device
Loading...
+ 2 hidden pages