Denon DN-X1100 User Manual

An ideal companion piece to Denon DJ’s new DN-S3700
Digital Media Turntable, the DN-X1100 is a professional
12” tabletop rack-mountable analogue matrix that
provides users with a groundbreaking array of
technologies and features.

Unlike conventional mixers, the DN-X1100 uses Matrix
Input Assignment that enables DJ’s to freely assign the
eight separate input to any channel, or even multiple
channels, providing unprecedented flexibility.

In addition to its eight analogue line inputs three
phono switchable capability, the DN-X1100 features a
High Performance “Flex fader” (crossfader) with
tension adjustment and contour control. For level
control there are four smooth 60 mm VCA channel
faders, and a responsive 45 mm VCA crossfader. For
added flexibility, the crossfader features A-B Post
Channel assignment capability, and the Channel Fader­Start Trigger is compatible with all Denon DJ
CD/MP3/Media players.

With its channel fader contour controls, the DN-X1100
allows DJs to express their craft with the subtlest and
most effective touches, enabling seamless smooth
traditional style fade-ins, as well as execute crowd­pleasing audio cuts for performance scratching.

USE IT. LIVE IT.

DN-X1100

Professional 4-Channel Mixer

Features

• Matrix Input Assignment

• 8 Line / 3 Phono, switchable

• 4 Smooth 60mm VCA Channel Faders w/contour adjust

• Flex Fader 45mm VCA Cross Fader w/contour adjust

• Independent Channel PFL Meters

• Independent 3-Band EQ (High-Mid-Low) w/full kills

• Independent CUE system (all channels)

• Booth Output Assign Selector

• Pre-monitor any channel including Master through the
booth output in the same manner as you would with your
headphones, with volume control!

• External Send/Return Control

- Multi Channel Assignable, - Effect On/Off, - Effect Pre &

Post switch, - Effect Dry/Wet Knob

• Effect Cueing

• Independent Channel A-B Post Switch (crossfader)

• Powerful & Clean Headphone Output

• Fader Start (all channels)

• 2 Independent Mic inputs w/3-band EQ

- Main Mic (Neutrik combo terminal)

• Aux Mix (TRS 1/4” terminal)

• Mic Ducking Attenuation w/level control

• Split / Cue Headphone Monitor w/PFL Metering

DISCOVER MORE AT WWW.DENONDJ.EU

Specifications

General

Maximum external dimensions: 320 (W) x 357 (D) x 91 (H) mm
Installation: Table-Top
Weight: 6.2 kg
Power supply: AC 120 V, 60 Hz (U.S.A. and Canada models)

AC 230 V, 50 Hz (European models)
Power consumption: 17 W
Environmental conditions: Operational temperature: 5 to 35 °C (41 to 95 °F)

Operational humidity: 25 to 85 % (no condensation)

Storage temperature: –20 to 60 °C (4 to 140 °F)

USE IT. LIVE IT.

DN-X1100

Professional 4-Channel Mixer

Audio Section

• Input Sensitivity & Impedance:
Main Mic: –54 dBV (2.0 mV) 10 kΩ/kohms
Aux Mic: –60 dBV (1.0 mV) 10 kΩ/kohms
Effect (Return): –14 dBV (200 mV) 50 kΩ/kohms
3-Phono: –50 dBV (3.0 mV) 50 kΩ/kohms
8-Line: –14 dBV (200 mV) 50 kΩ/kohms

• Output level & Impedance:
Main (Balanced): 4 dBm (1.23 V) 600 Ω/ohms load
Main (Unbalanced): 0 dBV (1.0 V) 1 kΩ/ohms
Booth (Balanced): 4 dBm (1.23 V) 600 Ω/ohms
Rec (RCA): –10 dBV (316 mV) 1 kΩ/kohms
Effect (Send): –14 dBV (200 mV) 1 kΩ/kohms
Headphone: 0 dBV (1.0 V) 32 Ω /ohms (33 Ω/ohms load)
Frequency Response:
Line: 20 to 20 kHz ±2 dB
Phono: 20 to 20 kHz RIAA ±2 dB
Mic: 20 to 20 kHz ±2 dB

• Signal to Noise ratio:
Line: 82 dB 0 dBV, 1 kHz, EQ flat
Phono: 75 dB 0 dBV, 1 kHz, EQ flat
Main Mic: 65 dB 0 dBV, 1 kHz, EQ flat

• Total harmonic distortion rate:
Line: Below 0.05 %
Phono: Below 0.05 %

• Cross talk: Over 70 dB

• Channel equalizer:
Hi: +10 dB, –33 dB (16 kHz)
Mid: +10 dB, –35 dB (1 kHz)
Low: +6 dB, –35 dB (60 Hz)

• Microphone equalizer:
Hi: +12 dB, –12 dB (10 kHz)
Mid: +12 dB, –12 dB (1 kHz)
Low: +12 dB, –12 dB (100 Hz)

* Specifications and design are subject to change without notice for purpose of improvement.

DISCOVER MORE AT WWW.DENONDJ.EU