DELONGHI ECAM44.66X Installation Manual
CONTENTS
1. IMPORTANT SAFEGUARDS ..........................7
1.1 SAVE THESE INSTRUCTIONS ...........................7
1.2 Short cord instructions .................................7
2. INTRODUCTION ..........................................8
2.1 Symbols used in these instructions ...............8
2.2 Letters in brackets .........................................8
2.3 Troubleshooting and repairs ..........................8
2.4 Video instruction manual available on: ........8
3. DESCRIPTION.............................................8
3.1 Description of the appliance ..........................8
3.2 Description of the control panel ....................8
3.3 Description of the accessories ........................9
3.4 Description of the milk container ..................9
4. BEFORE USE...............................................9
4.1 Checking the appliance .................................9
4.2 Installing the appliance .................................9
4.3 Connecting the appliance ..............................9
4.4 Setting up the appliance ...............................9
5. TURNING THE APPLIANCE ON....................10
6. TURNING THE APPLIANCE OFF ..................10
7. MENU SETTINGS ...................................... 10
7.1 Rinsing ........................................................10
7.2 Descaling ....................................................10
7.3 Installing the lter ......................................10
7.4 Replacing the water softener lter (if
installed) .....................................................10
7.5 Adjust time .................................................10
7.6 Auto-start ...................................................11
7.7 Auto-o (standby) ......................................11
7.8 Energy saving ..............................................11
7.9 Set temperature ..........................................11
7.10 Setting water hardness ...............................11
7.11 Setting the language ..................................11
7.12 Beep ............................................................11
7.13 Default values (reset) ..................................12
7.14 Statistics function........................................12
8. MAKING COFFEE .......................................12
8.1 Selecting the coee taste ............................12
8.2 Selecting the quantity of coee in the cup ..12
8.3 Customising the “my coee” quantity ..........12
8.4 Adjusting the coee mill .............................12
8.5 Tips for a hotter coee.................................13
8.6 Making coee using coee beans ...............13
8.7 Making coee using pre-ground coee .......13
8.8 Making LONG coee using coee beans ......13
8.9 Making LONG coee using pre-ground coee .
..................................................................13
8.10 Customising the “LONG coee” quantity ......14
9. MAKING CAPPUCCINOS AND MILK BASED
COFFEES .................................................. 14
9.1 Filling and attaching the milk container ......14
9.2 Adjusting the amount of froth .....................14
9.3 Making cappuccino and milk based coees
automatically ..............................................14
9.4 Preparing “MILK MENU” drinks ....................14
9.5 Cleaning the milk container after every use 15
9.6 Programming the quantity of coee and milk
in the cup for the CAPPUCCINO button ........15
9.7 Programming the quantity of coee and milk
in the cup for MILK MENU drinks .................15
10. DELIVERING HOT WATER ..........................15
10.1 Changing the quantity of water delivered
automatically ..............................................16
11. CLEANING................................................ 16
11.1 Cleaning the machine .................................16
11.2 Cleaning the machine’s internal circuit ........16
11.3 Cleaning the coee grounds container ........16
11.4 Cleaning the drip tray and condensate tray .16
11.5 Cleaning the inside of the coee machine ..17
11.6 Cleaning the water tank ..............................17
11.7 Cleaning the coee spouts ..........................17
11.8 Cleaning the pre-ground coee funnel .......17
11.9 Cleaning the infuser ....................................17
11.10 Cleaning the milk container ........................18
11.11 Cleaning the hot water connection nozzle ..18
12. DESCALING .............................................. 18
13. SETTING WATER HARDNESS ...................... 19
13.1 Measuring water hardness ..........................19
13.2 Setting water hardness ...............................19
14. WATER SOFTENER FILTER .........................19
14.1 Installing the lter ......................................20
14.2 Replacing the lter ......................................20
14.3 Removing the lter .....................................20
15. TECHNICAL DATA ...................................... 21
16. DISPLAYED MESSAGES .............................. 21
17. TROUBLESHOOTING ................................. 22
6
1. IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following.
• Read all instructions carefully.
• Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom of the
machine.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against re, electrical shock and personal injury, do not immerse cord, plug or appliance in
water or other liquid.
• Keep the appliance out of the reach of children and do not leave appliance unattended while in operation.
• Unplug from the outlet when not in use and before cleaning.
• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged
in any manner. Return the appliance to the nearest authorized service facility for examination, repair or
adjustment.
• The use of accessory attachments not recommended by the manufacturer may result in re, electrical
shock, or personal injury.
• Do not use outdoors.
• Make sure the power cord does not hang over the edge of the table or counter-top to avoid getting accidentally caught or entangled.
•
Do not place the appliance or its electrical parts on or near electric stoves, cooking surfaces, or gas burners.
• Plug cord into the wall outlet. To disconnect, rst turn machine “o”, then remove plug from wall outlet.
• Do not use the appliance for other than the intended use. This appliance is to be utilized for domestic
use only. The manufacturer declines all responsibility for any damage caused by improper, incorrect, or
irresponsible use.
WARNING: To reduce the risk of re or electric shock, do not remove the cover or the exterior of
the unit. Don’t attempt to repair or modify the machine, doing so will void the warranty. Repair
should be done by authorized service personnel only!
1.1 SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY
1.2 Short cord instructions
- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a
longer cord.
- Longer, detachable power supply cords or extension cords are available and may be used if care is exercised in their use.
- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating
of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be
a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over the
counter-top or table top where it can be pulled on by children or tripped over.
- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider
than the other). This plug will t into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to t,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
7
2. INTRODUCTION
Thank you for choosing the ECAM4466X automatic coee and
cappuccino maker.
We hope you enjoy using your new appliance.
Take a few minutes to read these instructions.
This will avoid all risks and damage to the machine.
2.1 Symbols used in these instructions
Important warnings are identied by these symbols.
It is vitally important to observe these warnings.
Danger!
Failure to observe the warning could result in life threatening
injury from electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Danger of burns!
Failure to observe the warning could result in scalds.
Please note:
This symbol identies important advice or information for the
user.
2.2 Letters in brackets
The letters in brackets refer to the legend in the Description of
the Appliance on page 3.
2.3 Troubleshooting and repairs
In the event of problems, rst try and resolve them following
the information given in the section “16. DISPLAYED MESSAGES”
and “17. TROUBLESHOOTING”.
If this does not resolve the problem or you require further information, you should consult Customer Experience by calling
the number given on the annexed “Customer Experience” sheet.
If your country is not among those listed on the sheet, call the
number given in the guarantee.
If repairs are required, contact De’Longhi Customer Experience
only.
Contact details are given in the guarantee certicate provided
with the appliance.
2.4 Video instruction manual available on:
http://ecam44660.delonghi.com
3. DESCRIPTION
3.1 Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Pre-ground coee funnel lid
A3. Beans container
A4. Pre-ground coee funnel
A5. Grinding adjustment dial
A6. Cup shelf
A7. Coee spouts (adjustable height)
A8. Hot water connection nozzle
A9. Condensate tray
A10. Coee grounds container
A11. Cup tray
A12. Drip tray
A13. Drip tray water level indicator
A14. Infuser door
A15. Infuser
A16. Water tank
A17. Water softener lter housing
A18. Water tank lid
A19. Main switch
3.2 Description of the control panel
(page 2 - B )
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
B1. button: turns the appliance on and o (standby)
B2. MENU/ESC button to access the menu (When in the set-
tings menu, press to exit the menu)
B3. OK button: to enable and conrm the selected function
B4. Display: guides the user in using the appliance
B5. button: to select the coee quantity
B6. aroma selection button: to select the coee taste
B7. button to deliver hot water
B8. button: to make 1 cup of LONG coee
B9. CAPPUCCINO button: to deliver a cappuccino (When in
the settings menu, press to scroll through the menu items)
B10. MILK MENU button: to access preparation of CAFFELATTE,
LATTE MACCHIATO, FLAT WHITE and MILK (When in the
settings menu, press to scroll through the menu items)
B11. button: to make 1 cup of coee with the settings
displayed
B12. button: to make 2 cups of coee with the settings
displayed
8
3.3 Description of the accessories
(page 2 - C )
C1. “Total Hardness Test” indicator paper
C2. Pre-ground coee measure
C3. Descaler
C4. Water softener lter (certain models only)
C5. Cleaning brush
C6. Hot water spout
3.4 Description of the milk container
(page 2 - D )
D1. Froth adjustment and CLEAN dial
D2. Milk container lid
D3. Milk container
D4. Milk intake tube
D5. Frothed milk spout (adjustable)
4. BEFORE USE
4.1 Checking the appliance
After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
4.2 Installing the appliance
Important!
When you install the appliance, you should respect the following safety warnings:
• The appliance gives o heat. After positioning the appliance on the worktop, leave a space of at least 3 cm between the surfaces of the appliance and the side and rear
walls and at least 15 cm above the coee maker.
• Water penetrating the coee maker could cause damage.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
• Arrange the cord in such a way that it cannot be damaged
by sharp edges or contact with hot surfaces (e.g. electric
hot plates).
4.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an eciently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
4.4 Setting up the appliance
Please note!
• Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of coffee in the mill. The machine is, however, guaranteed to be
new.
• The appliance is set with ENGLISH language: if you want to
change the language, please see paragraph “7.11 Setting
the language”.
• You should customise water hardness as soon as possible
following the instructions in section “13.2 Setting water
hardness”.
1. Connect the appliance to the mains electricity supply (g.
1) and make sure the main switch (A19) at the back of the
appliance is pressed down (g. 2).
2. Remove the water tank (A16) (g. 3), open the lid (A18)
(g. 4), ll to the MAX line with fresh water (g. 5), replace
the lid and put the tank back in the appliance.
Follow the instructions indicated on the appliance display:
3. “INSERT WATER SPOUT”: Check that the hot water spout
(C6) is inserted on the connection nozzle (A8) and place a
container holding a minimum of 33,38 .oz/100 ml underneath (g. 8).
4. “HOT WATER Press OK” is displayed;
5. Press the OK button to conrm. The appliance delivers
water from the spout then goes o automatically.
The coee machine is now ready for normal use.
Please note!
• When setting up the appliance, you need to make 4-5 cups
of coee or 4-5 cappuccinos before the appliance starts to
give satisfactory results.
• When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
• To enjoy your coee even more and improve the performance of your appliance, we recommend installing a water
softener lter (C4) as described in section “14. WATER SOFTENER FILTER”. If your model is not provided with a lter,
you can request one from De’Longhi Customer Services.
9
5. TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch
(A19) is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
(A7) and is collected in the drip tray (A12) underneath. Avoid
contact with splashes of water.
• To turn the appliance on, press the button (B1 - g.
9). The message “Heating up, Please wait” appears on the
display (B4).
When heating is complete, the message changes to “RINSING”.
As well as heating the boiler, this also heats the internal circuits
by circulating hot water.
The appliance is at temperature when the message indicating
the taste and quantity of coee appears.
6. TURNING THE APPLIANCE OFF
Whenever the coee machine is turned o after being used to
make coee, it performs an automatic rinse cycle.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts
(A7). Avoid contact with splashes of water.
• To turn the appliance o, press the button (B1 - g.
9).
• The message “Turning o underway Please wait” appears
on the display (B4), then the appliance performs a rinse
cycle and goes o (standby).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
• rst turn the appliance o by pressing the button;
• release the main switch (A19) at the back of the appliance
(g. 2).
Important!
Never press the main switch while the appliance is on.
7. MENU SETTINGS
7.1 Rinsing
Use this function to deliver hot water from the coee spouts
(A7) and hot water spout (C6), if inserted, to clean and heat the
appliance’s internal circuit.
Place a container with a minimum capacity of 100ml under the
coee and hot water spouts (g. 8).
To enable the function, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press (B9) or (B10) (g. 6) until “Rinsing” appears on
the display (B4);
3. Press the OK button (B3 - g. 7): the message “Conrm?” is
displayed;
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
4. Press the OK button. “RINSING Please wait” is displayed;
5. After a few seconds, hot water is delivered rst from the
coee spouts, then from the hot water spout (if inserted) to
clean and heat the appliance’s internal circuit. “RINSING” is
displayed, together with a progress bar which lls gradually
as preparation proceeds;
6. To stop the process press any button or wait for delivery of
water to stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, we
strongly recommend, when switching on the appliance,
performing 2/3 rinses before using it;
• After cleaning, it is normal for the coee grounds container
(A10) to contain water.
7.2 Descaling
For instructions on descaling, see section “12. DESCALING”.
7.3 Installing the lter
For instructions on how to install the lter, see section “14.
WATER SOFTENER FILTER”.
7.4 Replacing the water softener lter (if
installed)
For instructions on how to replace the lter, see section “14.2
Replacing the lter”.
7.5 Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press (B9) or (B10) (g. 6) until “Adjust time” appears
on the display (B4);
3. Press the OK button (B3 - g. 7): the hours ash on the
display;
4. Press or to change the hour;
5. Press the OK button to conrm. The minutes ash;
6. Press or to change the minutes;
10
7. Press the OK button to conrm.
The time is set. Press the MENU/ESC button to exit the menu.
7.6 Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must already be set correctly.
2. Press (B9) or (B10) (g. 6) until “Energy saving” appears on the display (B4);
3. Press the OK button (B3 - g. 7). “Disable?” is displayed; (or
“Enable?” if the function has been disabled);
4. Press the OK button to disable (or enable) energy saving
mode;
5. Press the MENU/ESC button to exit the menu.
When the function is active, if the machine is not used for some
time, “Energy saving” is displayed.
To enable auto-start, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press (B9) or (B10) (g. 6) until “Auto-start” appears
on the display (B4);
3. Press the OK button (B3 - g. 7). “Enable?” is displayed;
4. Press the OK button to conrm;
5.
Press
or
to choose the hour;
6. Press the OK button to conrm;
7. Press or to change the minutes;
8. Press the OK button to conrm;
9. Press the MENU/ESC button to exit the menu.
Once the time has been conrmed, activation of auto-start is
indicated by the symbol displayed alongside the time.
To disable the function:
1. Selec t auto-start from the menu;
2. Press the OK button. “Disable?” is displayed;
3. Press the OK button to conrm.
The symbol is no longer displayed.
7.7 Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press (B9) or (B10) (g. 6) until “Auto-o” appears on
the display (B4);
3. Press the OK button (B3 - g. 7);
4. Press or until the required operating time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to conrm;
6. Press the MENU/ESC button to exit the menu.
Auto-o is programmed.
7.8 Energy saving
Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption in compliance
with European regulations.
To disable (or enable) energy saving, proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
Please note!
• When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk based coee is delivered
as the appliance must heat up again.
• To prepare any drink, press any button to exit energy saving, then press the button corresponding to the drink you
want to make.
• If the milk container (D) is inserted, “Energy saving” cannot
be activated.
7.9 Set temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press (B9) or (B10) (g. 6) until “Set temperature”
appears on the display (B4);
3. Press the OK button (B3 - g. 7);
4. Press or until the required temperature is displayed
(●=low; ●●●●=maximum);
5. Press the OK button to conrm;
6. Press the MENU/ESC button to exit the menu.
7.10 Setting water hardness
For instructions on setting water hardness, see section “13. SETTING WATER HARDNESS”.
7.11 Setting the language
To modify the language of the display (B4), proceed as follows:
1. Press the MENU/ESC button (B2) to enter the menu;
2. Press (B9) or (B10) (g. 6) until “Set language” appears on the display;
3. Press the OK button (B3 - g. 7);
4. Press or until the required language is displayed;
5. Press the OK button to conrm;
6. A message conrming the language installed is displayed;
7. Press the MENU/ESC button to exit the menu.
11
Loading...