Delonghi ECAM37X.95 User Manual

Download

De’Longhi Appliances via Seitz, 47 31100 Treviso, Italy www.delonghi.com

5713238071_00_0718

ECAM37X.95

BEAN TO CUP ESPRESSO AND

CAPPUCCINO MACHINE

Instruction for Use

Instructions videos available at:

http://ecam37095.delonghi.com

page 6

B C

B1B9

PROFILE 1

A12

A13

B C

A10

A11

A22

A21

A20

A19

A16

A14

A15

A17

A18

1 2

4331

765

MILK

1614

CLEAN

25A

25B

18 20

22 24

PUSH

3130

CONTENTS

1. INTRODUCTION ...........................................7

1.1 Letters in brackets .................................................... 7

1.2 Troubleshooting and repairs..................................... 7

1.3 Download the App! .................................................. 7

2. DESCRIPTION ..............................................7

2.1 Description of the appliance (page 3 - A) ................. 7

2.2 Description of the homepage (page 2 - B) ............... 7

2.3 Description of the control panel (page 2 - C) ............ 7

2.4 Description of the accessories (page 2 - D) ............... 8

2.5 Description of the milk container (page 2 - E) .......... 8

3. SETTING UP THE APPLIANCE .........................8

4. TURNING THE APPLIANCE ON .......................8

5. TURNING THE APPLIANCE OFF ......................8

6. MENU SETTINGS .......................................... 9

6.1 Access the settings menu ......................................... 9

6.2 Exit the menu ........................................................... 9

6.3 Rinse ....................................................................... 9

6.4 Descaling ................................................................ 9

6.5 Water lter ..............................................................9

6.6 Beverages settings .................................................. 9

6.7 Auto-o (standby) .................................................. 9

6.8 Energy saving ......................................................... 9

6.9 Coee temperature .................................................9

6.10 Water hardness .......................................................9

6.11 Set language ........................................................... 9

6.12 Beep ...................................................................... 10

6.13 Bluetooth ............................................................... 10

6.14 Default values ....................................................... 10

6.15 Statistics ................................................................10

6.16 Customise prole .................................................. 10

7. MAKING COFFEE ........................................10

7.1 Making coee using coee beans .......................... 10

7.2 Selecting the coee aroma .................................... 10

7.3 Selecting the coee quantity ................................. 11

7.4 Making coee using pre-ground coee.................. 11

7.5 Adjusting the coee mill ........................................ 11

7.6 Tips for a hotter coee ........................................... 11

8. MAKING CAPPUCCINOS AND MILKBASED

COFFEES ................................................... 11

8.1 Filling and attaching the milk container ................12

8.2 Adjusting the amount of froth ...............................12

8.3 Making cappuccinos and milk-based coees

automatically ......................................................... 12

8.4 Cleaning the milk container after use ................... 12

9. COFFEE CARAFE ......................................... 13

10. DELIVERING HOT WATER ............................ 13

11. CUSTOMISING THE BEVERAGES .................. 13

12. MEMORISING YOUR OWN USER PROFILE .....14

13. CLEANING ................................................. 14

13.1 Cleaning the machine ............................................ 14

13.2 Cleaning the internal circuit ................................... 14

13.3 Cleaning the coee grounds container ................... 14

13.4 Cleaning the drip tray and condensate tray ............ 14

13.5 Cleaning the inside of the coee machine ............. 15

13.6 Cleaning the water tank ......................................... 15

13.7 Cleaning the coee spouts ..................................... 15

13.8 Cleaning the pre-ground coee funnel .................. 15

13.9 Cleaning the infuser ............................................... 15

13.10 Cleaning the milk container ................................... 15

13.11 Cleaning the hot water nozzle ................................ 16

14. DESCALING................................................16

15. SETTING WATER HARDNESS ........................ 17

15.1 Measuring water hardness ..................................... 17

15.2 Setting water hardness ......................................... 17

16. WATER SOFTENER FILTER ........................... 17

16.1 Installing the lter ................................................. 17

16.2 Replacing the lter................................................. 18

16.3 Removing the lter ................................................ 18

17. TECHNICAL DATA .......................................18

18. DISPLAYED MESSAGES ............................... 19

19. TROUBLESHOOTING ................................... 24

1. INTRODUCTION

Thank you for choosing this bean to cup espresso and cappuccino machine. Take a few minutes to read this Instruction for Use. This will avoid all risks and damage to the appliance.

1.1 Letters in brackets

The letters in brackets refer to the legend in the description of the appliance on pages 2-3.

1.2 Troubleshooting and repairs

In the event of problems, rst try and resolve them by reading the information given in sections "18. Displayed messages" and "19. Troubleshooting". If this does not resolve the problem or you require further information, you should consult Customer Services by calling the number given on the annexed "Customer Service" sheet. If your country is not among those listed on the sheet, call the number given in the guarantee. If repairs are required, contact De’Longhi Customer Services only. The addresses are given in the guarantee certicate provided with the machine.

1.3 Download the App!

A number of functions can be controlled remotely using the De’Longhi Coee Link App. In the App, you can also nd information, tips and curious facts about the world of coee, together with information on your machine at your ngertips.

This symbol highlights the functions you can control or

consult using the App. You can also create up to 3 new beverages and save them in your appliance.

Please note:

Check compatible devices on "compatibledevices.delonghi. com".

2. DESCRIPTION

2.1 Description of the appliance (page 3 - A)

A1. Beans container lid A2. Pre-ground coee funnel lid A3. Beans container A4. Pre-ground coee funnel A5. Grinding adjustment dial A6. Cup shelf A7. button: to turn the appliance on and o (standby) A8. Hot water connection nozzle A9. Coee spouts (adjustable height) A10. Condensate tray A11. Coee grounds container A12. Cup tray A13. Drip tray water level indicator A14. Drip tray grille A15. Drip tray A16. Water tank lid A17. Water tank A18. Water softener lter housing A19. Infuser door A20. Infuser A21. Power cord connector socket A22. Main switch

2.2 Description of the homepage (page 2 - B)

B1. Bluetooth active symbol B2. Energy Saving active symbol B3. Selected aroma B4. Directly selected beverages B5. Scroll arrow B6. Quantity selected B7. Descale required alarm B8. Milk container needs cleaning alarm B9. Filter needs replacing alarm

2.3 Description of the control panel (page 2 - C)

C1. : beverage quantity selection

C2. : prole selection

C3. : appliance settings menu

C4. : press to exit from the selected function and go

back to the main menu

C5. : My beverages selection menu. Unless previ-

ously programmed from the settings menu as described in chapter "11. Customising the beverages ", the beverage is

programmed directly the rst time you use the appliance

C6. : beverage aroma selection

2.4 Description of the accessories (page 2 - D)

D1. "Total Hardness Test" indicator paper (attached to page 2

of the English instructions) D2. Pre-ground coee measure D3. Descaler D4. Water softener lter (certain models only) D5. Cleaning brush D6. Hot water spout D7. Power cord

2.5 Description of the milk container (page 2 - E)

E1. Froth adjustment and CLEAN dial E2. Milk container lid E3. Milk container E4. Milk intake tube E5. Frothed milk spout (adjustable)

3. SETTING UP THE APPLIANCE

Please note!

• The rst time you use the machine, the water circuit is

empty and the appliance could be very noisy. The noise

becomes less as the circuit lls.

• Coee has been used to factory test the appliance and it

is therefore completely normal for there to be traces of

coee in the mill. The machine is, however, guaranteed to

be new.

• You should customise water hardness as soon as possible

following the instructions in section "15. Setting water

hardness".

1. Insert the power cable connector (D7) into the socket (A21)

at the back of the appliance and connect the appliance to

the mains electricity supply (g. 1). Make sure the main

switch (A22) at the back of the appliance is pressed (g. 2);

2. "SELECT LANGUAGE": Press and hold until

the required language appears on the display, then press

the ag corresponding to the language. Follow the instructions indicated on the appliance display:

3. "FILL TANK WITH" "FRESH WATER": remove the water tank

(A17) (g. 3), ll to the MAX line (marked on the tank) with

fresh water (g. 4, then put the tank back in the appliance

(g. 5);

4. "INSERT WATER SPOUT": Check that the hot water spout

(D6) is inserted on the connection nozzle (A8) (g. 6) and

place a container holding a minimum of 100 ml under-

neath (g. 7);

5. "WATER CIRCUIT EMPTY" "PRESS OK TO START": press

to conrm. The appliance delivers hot

water from the spout (g. 8) then goes o automatically. The coee machine is now ready for normal use.

Please note!

• The rst time you use the appliance, you need to make 4-5 cappuccinos before it starts to give satisfactory results.

• When making the rst 5-6 cappuccinos, it is normal to hear the noise of boiling water. After this, the noise becomes less.

• To improve the performance of your appliance, we recommend installing a water softener lter (D7) as described in section "16. Water softener lter". If your model is not provided with a lter, you can request one from De'Longhi Customer Services.

4. TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch (A22) is pressed (g. 2). Each time the appliance is turned on, it performs an automatic preheat and rinse cycle.

• To turn the appliance on, press the button (A15) (g.

8). The message "HEATING UP UNDERWAY" "PLEASE WAIT" appears on the display.

• When heating is complete, the message changes to: "RINSING UNDERWAY" "PLEASE WAIT". As well as heating the boiler, this also heats the internal circuits by circulating hot water.

The appliance is ready for use when the main screen (homepage) appears.

5. TURNING THE APPLIANCE OFF

Whenever the coee machine is turned o after being used to make coee, it performs an automatic rinse cycle.

• To turn the appliance o, press the button (A15) (g.

8).

• The message appears on the display, then (if envisaged) the appliance performs a rinse cycle and goes o (standby).

Please note!

If you will not be using the appliance for some time, unplug from the mains socket:

• rst turn the appliance o by pressing the button (g. 8);

• release the main switch (A22) at the back of the appliance (g. 2).

Important!

Never press the main switch while the appliance is on.

"TURNING OFF UNDERWAY" "PLEASE WAIT"

6. MENU SETTINGS

6.1 Access the settings menu

1. Press the " " button (C3) to enter the menu;

2. Scroll through the menu items by pressing until the required items is displayed;

3. Press the menu item you want to select.

6.2 Exit the menu

When you have made the adjustments, press until you are back on the homepage.

6.3 Rinse

Use this function to deliver hot water from the coee spouts (A9) and hot water spout (D6), if inserted, to clean and heat the appliance’s internal circuit.

1. Place a container with a minimum capacity of 100ml under the coee and hot water spouts (g. 8).

2. A few seconds after the "RINSING" item has been selected, hot water is delivered rst from the coee spouts and then from the hot water spout (if inserted) which cleans and heats the appliance’s internal circuit (g. 7).

3. To stop rinsing, press or wait for rinsing to stop automatically.

Please note!

• If the appliance is not used for more than 3-4 days, when you turn it on again, we strongly recommend performing 2/3 rinses before use;

• After cleaning, it is normal for the grounds container (A11) to contain water.

6.4 Descaling

For instructions on descaling, see section "14. Descaling".

6.5 Water lter

For instructions on how to install the lter (D7), see section "16. Water softener lter".

6.6 Beverages settings

In this section, you can consult your customised settings and, if you wish, reset the default values for each beverage and each prole.

1. Once in the settings menu, press "DRINK SETTINGS". The values for the rst beverage appear on the display;

2. The values are displayed on vertical bars. The default value

is indicated by the highlighted by the solid part of the vertical bar;

3. To go back to the settings menu, press . To scroll and display the beverages, press ;

4. To reset the default values for the beverage displayed, press

symbol, while the current value is

;

5. "CONFIRM RESET?": to conrm, press (to cancel, press );

6. "VALORI FABBRICA""IMPOSTATI": press .

The beverage has been reset to the default values. Proceed with the other beverages or go back to the homepage by pressing

twice.

Please note!

To change the beverages in another prole, go back to the homepage, select the required prole and repeat the procedure.

6.7 Auto-o (standby)

Auto-o can be set so that the appliance goes o after 15 or 30 minutes, or 1, 2 or 3 hours. To programme Auto-o, proceed as follows:

1. Press "AUTO-OFF";

2. Select the required time interval by pressing the selection arrows

3. To conrm, press .

Auto-o is programmed.

(increase) or (decrease);

6.8 Energy saving

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption in compliance with European regulations. To disable or enable "Energy Saving", proceed as follows:

1. Press "ENERGY SAVING" to disable ( ) or ena-

ble (

) the function; The corresponding symbol (B2) appears on the top bar of the homepage to indicate that the function has been enabled.

Please note:

If "Energy Saving" is active, you may have to wait a few seconds before delivery.

6.9 Coee temperature

To modify the temperature of the water used to make the coee, proceed as follows:

1. Press "COFFEE TEMPERATURE"

appear on the display (B1) (the current value is underlined);

2. Press the value you want to set (LOW, MEDIUM, HIGH,

MAXIMUM).

. The selectable values

6.10 Water hardness

For instructions on setting water hardness, see section "15. Setting water hardness".

6.11 Set language

To modify the language of the display, proceed as follows:

1. Press "SET LANGUAGE";

2. Press the ag corresponding to the language you want to set (press available).

to display all the languages

6.12 Beep

This enables or disables the beep emitted by the machine each time an icon is pressed or an accessory is inserted/removed. To disable or enable the beep, proceed as follows:

1. Press "BEEP" to disable ( ) or enable ( ) the function;

6.13 Bluetooth

This function enables or disables the protection PIN to connect to the appliance from a device.

1. Press "BLUETOOTH". digits) and a 4 digit number (PIN) appear on the display (B1);

2. Press ( ) to enable or ( ) to disable the request for the PIN when you connect via the App;

The preset PIN is "0000". You are recommended to customise the PIN directly from the APP.

Please note!

The serial number of the appliance, visible in the "Bluetooth" function, enables it to be identied unambiguously when an association is created with the APP.

The serial number of the machine (19

6.14 Default values

This resets all menu settings and programmed quantities for all proles back to the default values (with the exception of the language which remains as set). To reset the default values, proceed as follows:

1. Press "DEFAULT VALUES". "DEFAULT VALUES" is displayed. Press

cancel the operation);

2. "DEFAULT VALUES SET": press to conrm.

to conrm (or press to

6.15 Statistics

This displays statistics relating to the machine. To view the statistics, proceed as follows:

1. Press "STATISTICS" and check all the statistics by scrolling through the items using

6.16 Customise prole

To customise the icon of the current prole, proceed as follows:

1. Press "CUSTOMISE PROFILE";

2. Press the desired icon. On the homepage, the top band is displayed with the colour of the icon.

7. MAKING COFFEE

7.1 Making coee using coee beans

Important!

Do not use green, caramelised or candied coee beans as they could stick to the coee mill and make it unusable.

1. Fill the container (A4) with coee beans (g. 10);

2. Place a cup under the coee spouts (A9);

3. Lower the spouts as near as possible to the cup (g. 11). This makes a creamier coee;

4. Then select your required coee:

• ESPRESSO

• LONG

• COFFEE

• DOPPIO+

• 2X ESPRESSO

5. Preparation begins. An image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation proceeds.

Please note:

• You can prepare 2 cups of ESPRESSO coee at the same

time by pressing "2X PRESSO (the image is displayed for a few seconds at the start of preparation).

• While the machine is making coee, delivery can be interrupted at any moment by pressing

Once the coee has been delivered, the machine will be ready for further use.

Please note!

• Various alarm messages could be displayed while using the appliance (FILL TANK, EMPTY GROUNDS CONTAINER, ETC.). Their meaning is explained in section "18. Displayed messages".

• For hotter coee, see section "7.6 Tips for a hotter coee".

• If the coee is delivered a drop at a time, too weak and not creamy enough or too cold, read the tips in sections "7.5 Adjusting the coee mill" and "19. Troubleshooting".

• Preparation of each coee can be customised (see sections "11. Customising the beverages" and "12. Memorising your own user prole").

" during preparation of 1 ES-

7.2 Selecting the coee aroma

Press the button (C6):

Custom (if programmed) / Standard

EXTRA LIGHT

LIGHT

MEDIUM

STRONG

X-STRONG

(see "7.4 Making coee using pre-ground coee")

After delivering the beverage, the aroma setting is reset to the

value.

7.3 Selecting the coee quantity

Press the button (C1):

After delivering the beverage, the quantity setting is reset to the

value

7.4

Making coee using pre-ground coee

Important!

• Never add pre-ground coee when the machine is o or it could spread through the inside of the machine and dirty it. This could damage the machine.

• Never use more than 1 level measure (D2) as it could soil the inside of the coee machine or block the funnel (A4).

• When using pre-ground coee, only one cup can be made at a time.

1. Press the button (C6) until " " (ground) is displayed.

2. Open the pre-ground coee funnel lid (A2).

3. Make sure the funnel(A4) is not blocked, then add one level measure of pre-ground coee (g. 12).

4. Place a cup under the coee spouts (A9).

5. Then select your required coee:

• ESPRESSO

• LONG

• COFFEE

Custom (if programmed) / Standard

SMALL SIZE

MEDIUM SIZE

LARGE SIZE

EXTRA-LARGE SIZE

6. Preparation begins. An image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation proceeds.

Once the coee has been delivered, the machine will be ready for further use.

Important! Making LONG coee: Halfway through preparation, the message "ADD GROUND COFFEE" "MAX. ONE MEASURE" is displayed. Add one level measure of pre-ground coee and press

7.5 Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and should not require regulating initially. However, if after making the rst few coees you nd that the coee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial (A5) (g. 13).

Please note!

The grinding adjustment dial must only be turned when the coee mill is in operation during the initial phase of coee preparation.

If the coee is delivered too slowly or not at all, turn one click clockwise towards 7. For fuller bodied creamier coee, turn one click anticlockwise towards 1 (do not turn more than one click at a time

otherwise the coee could be delivered a drop at a time). These adjustments will only be evident after at least 2 cups of coee have been delivered. If this adjustment does not produce the desired result, turn the dial another click.

7.6 Tips for a hotter coee

For hotter coee, proceed as follows:

• per form a rinse cycle by selecting the "Rinsing" function in

the settings menu (section "6.3 Rinse

• warm the cups with hot water using the hot water function

(see section"10.

• increase the coee temperature in the settings menu

DDelivering hot water");

"(C3) (see section "6.9 Coee temperature ").

");

8. MAKING CAPPUCCINOS AND MILK

BASED COFFEES

Please note!

To avoid milk with poor froth or large bubbles, always clean the milk container lid (E2) and hot water connection nozzle (A8) as described in sections "8.4 Cleaning the milk container after use", "13.10 Cleaning the milk container" and "13.11 Cleaning the hot water nozzle".

8.1 Filling and attaching the milk container

1. Remove the lid (E2) (g. 14);

2. Fill the milk container (E3) with a sucient quantity of milk, not exceeding the MAX level marked on the container (g.

15). Each mark on the side of the container corresponds to about 100 ml of milk;

Please note!

• For a denser more even froth, you must use skimmed or partially skimmed milk at refrigerator temperature (about 5°C).

• If "Energy Saving" mode is enabled, you may have to wait a few seconds before the beverage is delivered.

3. Make sure the milk intake tube (E4) is correctly inserted in the bottom of the milk container lid (g. 16);

4. Place the lid back on the milk container;

5. Remove the hot water spout (D6);

6. Attach the milk container (E) to the connection nozzle (A8) and push as far as it will go (g. 17). The machine emits a beep (if the beep function is enabled);

7. Place a suciently large cup under the coee spouts (A9) and the frothed milk spout (E5). Adjust the length of the milk spout. To move it nearer the cup, simply pull it downwards (g. 18).

8. Follow the instructions below for each function.

8.2 Adjusting the amount of froth

Turn the froth adjustment dial (E1) to adjust the amount of froth on the milk delivered while making cappuccinos and milk-based coees.

Dial position

Description Recommended for…

NO FROTH HOT MILK (not frothed) /

CAFFELATTE

MIN. FROTH latte macchiato/

FLAT WHITE

MAX. FROTH CAPPUCCINO / CAPPUCCI

NO+ / CAPPUCCINO MIX / ESPRESSO MACCHIATO / HOT MILK (frothed)

8.3 Making cappuccinos and milk-based coees

automatically

1. Fill the milk container (E) and attach it as described above.

2. Select the required beverage:

• CAPPUCCINO

• LATTE MACCHIATO

• HOT MILK

• CAPPUCCINO+

• CAPPUCCINO MIX

• CAFFELATTE

• FLAT WHITE

• ESPRESSO MACCHIATO

3. A message on the display instructs you to turn the froth adjustment dial (E1) according to the froth required by the original recipe. Turn the dial on the milk container lid.

4. After a few seconds, preparation begins automatically and an image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation progresses.

Once the coee has been delivered, the machine will be ready for further use.

Please note: general indications when preparing all milkbased beverages

• : press to interrupt preparation completely and go back to the homepage.

• move on to the next delivery (if applicable) to complete the beverage.

• Preparation of each coee can be customised (see sections "11. Customising the beverages " and "12. Memorising your own user prole").

• Do not leave the milk container out of the refrigerator for long periods. The warmer the milk (5°C is ideal), the poorer the quality of froth produced.

: press to interrupt milk or coee delivery and

8.4 Cleaning the milk container after use

Each time you use a milk function, "TURN MILK FROTH ADJUSTMENT DIAL" "TO CLEAN POSITION" appears on the display and the milk frother lid must be cleaned:

1. Leave the milk container (E) in the machine (you do not need to empty it);

2. Place a cup or other recipient under the frothed milk spout;

3. Turn the froth adjustment dial (E1) to "CLEAN" (g. 19). "CLEANING UNDERWAY" "RECIPIENT UNDER SPOUT" appears on the display together with a bar which gradually lls as cleaning progresses (g. 20). Steam mixed with hot water comes out of the frothed milk spout. Cleaning stops automatically;

4. Turn the dial back to one of the froth selections;

5. Remove the milk container and always clean the hot water connection nozzle (A8) with a sponge (g. 21).

Please note!

• To prepare a number of cappuccinos and milk based coffees, clean the milk container after you have prepared the last beverage only. To proceed with making the next beverages, when the CLEAN message is displayed, press

• If you do not clean the milk container, the symbol appears on the display to remind you that it needs cleaning.

• The milk container can be kept in the refrigerator.

• In some cases, to clean you must wait for the appliance to heat up.

9. COFFEE CARAFE

1. Position a carafe under the coee spouts (A9). When choosing the carafe to use, bear in mind the quantity to be delivered, namely:

Selected quantity Quantity (ml)

250

500

750

2. Press "COFFEE POT", "SELECT AROMA" "AND NUMBER OF CUPS";

3. Press .

4. After a few seconds, preparation begins automatically and an image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation progresses.

Once the coee has been delivered, the machine will be ready for further use.

Please note:

• : press to interrupt preparation completely and go back to the homepage.

SAFETY WARNING:

After making the pot of coee, leave the appliance to cool for 5 minutes before making another beverage. Risk of overheating!

10. DELIVERING HOT WATER

1. Make sure the hot water spout (D6) is attached correctly to the hot water connection nozzle(A8);

2. Place a container under the spout (as close as possible to avoid splashes);

3. Press "HOT WATER";The corresponding image appears on the display, together with a progress bar which lls gradually as preparation proceeds;

4. The machine delivers hot water, then delivery stops automatically. To interrupt hot water delivery manually, press

Please note!

• If "Energy Saving" mode is active, you may have to wait a few seconds before the hot water is delivered.

• Preparation of hot water can be customised (see sections "11. Customising the beverages" and "12. Memorising your own user prole").

11. CUSTOMISING THE BEVERAGES

The aroma (when required) and quantity of the beverages can be customised.

1. Make sure the user prole for which you want to customise the beverage is active. You can select "MY" beverages for each of the proles;

2. Press (C5);

3. To access the customising screen, choose the beverage you want to customise. The corresponding accessories must be inserted;

4. (Beverages including coee only) "CHOOSE COFFEE AROMA": Select the required aroma by pressing "-" or "+" and press "

5. "COFFEE QUANTITY" "STOP TO SAVE": Preparation begins and the appliance displays the quantity customising screen in the form of a vertical bar. The star alongside the bar represents the current quantity;

6. When the amount reaches the minimum quantity you can set, is displayed;

7. Press when the required quantity in the cup is reached;

8. "SAVE NEW SETTINGS?": Press to save (or

The appliance conrms if the values have been saved or not (depending on the previous selection). Press . The appliance goes back to the homepage.

Please note!

• Cappuccinos and milk-based coees: the coee aroma

is saved rst, followed by the quantity of rst milk, then coee;

• Hot water: the appliance delivers hot water. Press

• You can also customise the beverages by connecting with the DeLonghi Coee Link App.

• Press to exit programming. The values will not be saved.

Beverage quantity table

Beverage Standard

to cancel).

to save the required quantity.

Programmable

quantity

ESPRESSO 40 ml 20-180 ml

LONG 160 ml 115-250 ml

COFFEE 180 ml 100-240 ml

DOPPIO+ 120 ml 80-180 ml

HOT WATER 250 ml 20-420 ml

12. MEMORISING YOUR OWN USER PROFILE

The appliance allows you to memorise 3 dierent proles, each associated with a dierent icon. The customised "MY" beverages "AROMA" and "QUANTITY" values are saved in each prole (see section "11. Customising the beverages"). The order in which all the beverages are displayed is based on the frequency of selection.

To select a prole, press

Please note!

• " GUEST" prole: select this prole to deliver beverages with the default settings.

• You can rename your personal prole by connecting with the DeLonghi Coee Link App (only the rst three characters will be displayed).

• To customise the prole icon, see section "6.16 Customise prole".

and select the desired prole.

13. CLEANING

13.1 Cleaning the machine

The following parts of the machine must be cleaned regularly:

• the appliance’s internal circuit;

• coee grounds container (A11);

• drip tray (A15), condensate tray (A10), drip tray grille (A14) and tray full indicator (A13);

• water tank (A17);

• coee spouts (A9);

• pre-ground coee funnel (A4);

• infuser (A20), accessible after opening the infuser door (A19);

• milk container (E);

• hot water connection nozzle (A8);

• touch screen (B).

Important!

• Do not use solvents, abrasive detergents or alcohol to clean the coee machine. With De’Longhi superautomatic coee machines, no chemical products are required for cleaning purposes.

• None of the components of the appliance can be washed in a dishwasher with the exception of the drip tray grille (A14) and milk container (E).

• Do not use metal objec ts to remove encrustations or coee deposits as they could scratch metal or plastic surfaces.

13.2 Cleaning the internal circuit

If the appliance is not used for more than 3/4 days, before using it again, we strongly recommend switching it on and:

• performing 2/3 rinse cycles by selecting the "Rinse" function (section "6.3 Rinse ");

• delivering hot water for a few seconds (section "10. Delivering hot water").

Please note!

After cleaning, it is normal for the grounds container (A11) to contain water.

13.3 Cleaning the coee grounds container

When "EMPTY GROUNDS CONTAINER" appears on the display, the grounds container must be emptied and cleaned. The appliance cannot be used to make coee until you have cleaned the grounds container (A11). Even if not full, the empty grounds container message is displayed 72 hours after the rst coee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned o with the main switch (A22).

Important! Danger of scalding

If you make a number of cappuccinos one after the other, the metal cup tray (A12) becomes hot. Wait for it to cool down before touching it and handle it from the front only. To clean (with the machine on):

1. Remove the drip tray (A15) (g. 22), empty and clean.

2. Empty the grounds container (A11) and clean thoroughly to remove all residues left on the bottom. This can be done using the spatula on the brush (D5) provided.

3. Check the condensate tray (A10) (red) and empty if necessary.

Important!

When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container may ll up more than expected and clog the machine.

13.4 Cleaning the drip tray and condensate tray

Important!

The drip tray (A15) is tted with a level indicator (A13) (red) showing the amount of water it contains (g. 23). Before the indicator protrudes from the cup tray (A12), the drip tray must be emptied and cleaned, otherwise the water may overow the edge and damage the appliance, the surface it rests on or the surrounding area.

To remove the drip tray, proceed as follows:

1. Remove the drip tray and coee grounds container (A11) (g. 22);

2. Remove the cup tray (A12) and drip tray grille (A14), then empty the drip tray and grounds container and wash all components.

3. Check the condensate tray (A15) (red) and empty if necessary;

4. Put the drip tray complete with grille and grounds container back in the appliance.

13.5 Cleaning the inside of the coee machine

Danger of electric shock!

Before cleaning internal parts, the machine must be turned o (see section "5. Turning the appliance o") and unplugged from the mains power supply. Never immerse the machine in water.

1. Check regularly (about once a month) that the inside of the appliance (accessible after removing the drip tray (A15)) is not dirty. If necessary, remove coee deposits with the brush (D5) supplied and a sponge.

2. Remove all residues with a vacuum cleaner (g. 24).

13.6 Cleaning the water tank

Clean the water tank (A17) regularly (about once a month) and whenever the water softener lter (D7) (if installed) is replaced with a damp cloth and a little mild washing up liquid. Rinse thoroughly before lling the tank and putting it back in the appliance;

Remove the lter (if installed) and rinse with running water;

3. Replace the lter (if installed), ll the tank with fresh water and replace;

4. (Models with water softener lter only) Deliver about 100ml of hot water to reactivate the lter.

13.7 Cleaning the coee spouts

1. Clean the coee spouts (A9) regularly with a sponge or cloth (g. 25A);

2. Check the holes in the coee spouts are not blocked. If necessary, remove coee deposits with a toothpick (g. 25B).

13.8 Cleaning the pre-ground coee funnel

Check regularly (about once a month) that the pre-ground coee funnel (A4) is not blocked. If necessary, remove coee deposits with the brush (D5) supplied.

13.9 Cleaning the infuser

The infuser (A20) must be cleaned at least once a month.

Important!

The infuser cannot be removed when the machine is on.

1. Make sure the machine is correctly turned o (see section "5. Turning the appliance o ");

2. Remove the water tank (A17) (g. 3);

3. Open the infuser door (A19) (g. 26) on the right side of the appliance;

4. Press the two coloured release buttons inwards and at the same time pull the infuser outwards (g. 27);

5. Soak the infuser in water for about 5 minutes, then rinse under the tap;

Important!

RINSE WITH WATER ONLY NO WASHING UP LIQUID  NO DISH WASHER Clean the infuser without using washing up liquid as it could be damaged.

6. Use the brush (D5) to remove any coee residues left in the infuser housing, visible through the infuser door;

7. After cleaning, replace the infuser by sliding it onto the internal support (g. 28), then push the PUSH symbol fully in until it clicks into place;

Please note!

If the infuser is dicult to insert, before insertion, adapt it to the right size by pressing the two levers shown in g. 29.

8. Once inserted, make sure the two coloured buttons have snapped out (g. 30);

9. Close the infuser door;

10. Put the water tank back.

13.10 Cleaning the milk container

To keep the frother ecient, clean the milk container every two days as described below.

1. Remove the lid (E2);

2. Remove the milk spout (E5) and intake tube (E4) (g. 31);

3. Turn the froth adjustment dial (E1) anticlockwise to the "INSERT" position (g. 31) and pull it o upwards;

4. Wash all the components thoroughly with hot water and mild washing-up liquid. All com-

ponents are dishwasher safe, but must be placed in the top basket of the dishwasher.

Make sure there are no milk residues on the hollow and groove under the

5. Rinse inside the froth adjustment dial seat with running water (g. 33);

dial (g. 32). If necessary, scrape the groove with a toothpick;

6. Check that the intake tube and spout are not clogged with

34 35

milk residues;

7. Replace the dial (in correspondence to the word "INSERT"), spout and milk intake tube;

8. Place the lid back on the milk container (E2).

13.11 Cleaning the hot water nozzle

Each time you prepare milk, clean the connection nozzle (A8) with a sponge to remove milk residues from the gaskets (g.

21).

14. DESCALING

Important!

• Before use, read the instructions and the labelling on the descaler pack.

• You should use De’Longhi descaler only. Using unsuitable descalers, or failing to perform the descale procedure correctly, could lead to the machine developing faults not covered by the manufacturer's guarantee.

Descale the appliance when "DESCALING NEEDED" "PRESS OK TO START (~45min)" appears on the display: To descale immediately, press To descale the appliance later, press . The symbol appears on the display to remind you that the appliance needs descaling. (the message appears each time you turn the appliance on). To access the descaling menu:

1. Pressthe " " button (C3) to enter the menu;

2. Press "DESCALE" and follow the instructions on the display;

3. "REMOVE WATER FILTER" (g. 34): extract the water tank (A17), remove the water softener lter (D7) (if present) and empty the water tank. Press

and follow the operations from point 3.

;

A B

(one litre) up to level B and put the water tank back. Press

;

5. "EMPTY DRIP TRAY" (g. 22):

6. Remove, empty and replace the drip tray (A15) and grounds container (A11). Press

7. "POSITION 2l CONTAINER" "OK TO START":

Place an empty container with a minimum capacity of 2 litres under the hot water spout (D6) and coee spouts (A9) (g. 9);

Important! Danger of scalding

Hot water containing acid ows from the hot water and coee spouts. Take care to avoid contact with splashes of this solution.

8. Press " " to conrm that you have added the descaling solution. "DESCALING UNDERWAY" "PLEASE WAIT" is displayed: The descale programme starts and the descaler liquid comes out of the hot water and coee spouts. A series of rinses is performed automatically to remove all the scale residues inside the coee machine;

After about 25 minutes, descaling stops;

9. "RINSE AND FILL WATER TANK" "UP TO MAX LEVEL" (g.

4): the appliance is now ready to rinse with fresh water. Empty the container used to collect the descaler solution. Extract the water tank, empty, rinse under running water, ll with fresh water up to the MAX level and put back in the appliance;

10. "POSITION 2l CONTAINER" "OK TO START RINSING": Place the container used to collect the descaler solution empty under the coee spouts and hot water spout (g. 9) and press

11. Hot water is delivered rst from the coee spouts, then from the hot water spout and "RINSING UNDERWAY" is displayed;

;

12. When the water in the tank has run out, empty the container used to collect the rinsing water;

13. (If the lter is installed) "INSERT FILTER" "INTO ITS HOUSING" (g. 36). Press " " and extract the water tank. Replace the water sof-

tener lter if removed previously;

;

4. "DESCALER (LEVEL A)" "AND WATER (LEVEL B)" (g. 35); Pour the descaler into the tank up to the level A marked inside the tank (equal to one 100ml pack), then add water

14. "RINSE AND FILL WATER TANK" "UP TO MAX LEVEL" (g. 4): Fill the tank up to the MAX level with fresh water;

15. "INSERT WATER TANK" (g. 5): Put the water tank back in the appliance;

16. "POSITION 2l CONTAINER" "OK TO START RINSING": Place the container used to collect the descaler solution empty under the hot water spout (g. 9) and press

17. Hot water is delivered from the hot water/steam spout and "RINSING UNDERWAY" "PLEASE WAIT" is displayed;

18. "EMPTY DRIP TRAY" (g. 22): At the end of the second rinse, remove, empty and replace the drip tray (A15) and grounds container (A11) and press ;

19. "DESCALE COMPLETE": press ;

20. "FILL TANK WITH" "FRESH WATER": empty the container used to collect the rinse water, remove the water tank and ll with fresh water up to the MAX level, then put back in the appliance.

The descaling cycle is now complete.

Please note!

• If the descaling cycle is not completed correctly (e.g. no electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container (A11) to contain water.

• If the water tank has not been lled to the MAX level, at the end of descaling, the appliance requests a third rinse to guarantee that the descaler solution has been completely eliminated from the machine's internal circuits. Before starting rinsing, remember to empty the drip tray;

• The appliance may request descaling cycles at very short intervals. This is normal and due to the appliance’s advanced control system.

15. SETTING WATER HARDNESS

The "DESCALING NEEDED" "PRESS OK TO START ~45MIN

" message is displayed after a period of time established according to water hardness. The machine is set by default for a hardness value of "4". The machine can also be programmed according to the hardness of the mains water in the various regions so that the machine needs to be descaled less often.

15.1 Measuring water hardness

1. Remove the TOTAL HARDNESS TEST indicator paper (D1)

from its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. Each square corresponds to one level.

Indicator paper Water hardness

Level 1 - soft water

Level 2 - slightly hard water

Level 3 - hard water

Level 4 - very hard water

15.2 Setting water hardness

1. Access the menu as described in section "6.1 Access the settings menu";

2. Press "WATER HARDNESS";

3. "WATER HARDNESS" "CURRENT VALUE UNDERLINED": Press the required level (Level 1 = soft water; Level 4 = very hard water);

4. Press " " to go back to the homepage.

The machine is now reprogrammed with the new water hardness setting.

16. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (D4). If this is not the case with your model, you are recommended to purchase one from De’Longhi Customer Services. To use the lter correctly, follow the instructions below.

16.1 Installing the lter

1. Remove the lter (D7) from the packaging;

2. Access the menu as described in section "6.1 Access the settings menu";

3. Press "WATER FILTER"; "TURN DATE INDICATOR TO NEXT 2 MONTHS" (g. 37): turn the date disk to display the next 2 months of use.

4. Press ;

37 38

Please note

IThe lter lasts about two months if the appliance is used normally. If the coee machine is left unused with the lter installed, it will last a maximum of 3 weeks.

5. "RUN WATER INTO FILTER HOLE" "UNTIL IT COMES OUT" (g.

38): To activate the lter, run tap water through the hole in the lter as shown in the gure until water comes out of the openings at the side for more than a minute. Press

;

6. Extract the tank (A17) from the appliance and ll with water.

7. "IMMERSE FILTER TO" "EXPEL AIR BUBBLES" (g. 39): Insert the lter in the water tank and immerse it completely for about ten seconds, sloping it and pressing it lightly to enable the air bubbles to escape. Press ;

8. "INSERT FILTER" "IN HOUSING": Insert the lter (D7) in the lter housing (g. 36) and press as far as it will go. Press

;

9. "INSERT WATER TANK": Close the tank with the lid (A17), then put the tank back in the machine (g. 5);

10. "POSITION 0.5L

CONTAINER" "OK TO ENABLE FILTER" (g. 7): Place the container under the hot water spout (D6) and press

. Delivery begins and stops automatically.

The lter is now active and the coee machine can be used.

16.2 Replacing the lter

Replace the lter (D7) when "REPLACE WATER FILTER" "PRESS OK TO START" appears on the display: to replace immediately, press

To replace the lter later, press . The symbol appears on the display to remind you that the lter needs replacing. To replace, proceed as follows:

1. Extract the tank (A17) and exhausted lter;

2. Remove the new lter from the packaging;

3. Access the menu as described in section "6.1 Access the settings menu";

4. Follow the operations described in the previous section from point 3.

The lter is now active and the coee machine can be used.

and follow the instructions from point 5.

Please note!

After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter even if the message has not yet been displayed.

16.3 Removing the lter

If you want to use the appliance without the lter (D7), you must remove it and notify the appliance of its removal. Proceed as follows:

1. Extract the tank (A17) and exhausted lter;

2. Access the menu as described in section "6.1 Access the settings menu";

3. PRESS "WATER FILTER";

4. Press the selector corresponding to " REMOVE WATER FILTER";

5. "CONFIRM FILTER REMOVAL": press press

6. "FILTER REMOVED": the change has been saved. Press

Please note!

After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter even if the message has not yet been displayed.

to go back to the settings menu);

to go back to the homepage.

(or

17. TECHNICAL DATA

Voltage: 220-240 V~ 50-60 Hz max. 10 A Power: 1450 W Pressure: 1.9 MPa (19 bars) Water tank capacity: 1.8 l Size LxHxD: 240x440x360 mm Cord length: 1750 mm Weight: 10 kg Beans container capacity: 300 g Frequency: 2400/2483.5 MHz Maximum transmission power 10 mW

18. DISPLAYED MESSAGES

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

FILL TANK WITH FRESH WATER

INSERT WATER TANK

EMPTY GROUNDS CONTAINER

Insucient water in the tank

The tank

(A17)

is not correctly in place. Insert the tank correctly and press as far as it

The grounds container (A11) is full.

(A17)

. Fill the tank with water and/or insert it correct-

ly, pushing it as far as it will go until it clicks into place.

will go.

Empty the grounds container and drip tray (A15), clean and put back in the appliance. Important: when removing the drip tray, the grounds container MUST be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container may ll up more than expected and clog the machine.

INSERT GROUNDS CONTAINER After cleaning, the grounds container

not been replaced.

ADD GROUND COFFEE MAX. ONE MEASURE

The pre-ground coee function has been selected without placing any pre-ground coee in the funnel

(A4)

(A11)

has

Remove the drip tray (A15) and insert the grounds container.

Place pre-ground coee in the funnel and repeat delivery

(g. 12)

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

ADD GROUND COFFEE MAX. ONE MEASURE

FILL BEANS CONTAINER

GROUND TOO FINE. ADJUST MILL

SELECT A MILDER TASTE OR REDUCE COFFEE AMOUNT

A LONG coee with pre-ground coee has been requested

The coee beans have run out. Fill the beans container

(A4)

The pre-ground coee funnel

The grinding is too ne and the coee is delivered too slowly or not at all.

If the water softener lter (D7) is present, an air bubble may have been released inside the circuit, obstructing delivery.

Too much coee has been used. Select a milder taste by pressing the "AROMA"

is clogged. Empty the funnel with the help of the brush

Place pre-ground coee in the funnel (A4) (g.

12) and press the selector corresponding to "OK" to continue and complete delivery.

(A4) (g. 10)

(D5) as described in section "13.8 Cleaning the pre-ground coee funnel".

Repeat coee delivery and turn the grinding adjustment dial wise towards "7" while the coee mill is in operation. If after making at least 2 coees delivery is still too slow, repeat the correction procedure, turning the grinding adjustment dial another click until delivery is correct (see section "7.5 Adjusting the coee mill" problem persists, make sure the water tank (A17) is fully inserted.

Insert the hot water spout (D6) in the appliance and deliver a little water until the ow becomes regular.

button (C5) or reduce the quantity of ground coee (maximum 1 measure).

(A5) (g. 13)

one click clock-

)

. If the

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

INSERT WATER SPOUT

INSERT MILK CONTAINER

INSERT INFUSER ASSEMBLY

The hot water spout (D6) is not inserted or is inserted incorrectly

The milk container (E) is not inserted correctly. Insert the milk container, pushing it as far as

The infuser (A20) has not been replaced after cleaning.

Insert the water spout as far as it will go.

it will go.

Insert the infuser as described in section "13.9 Cleaning the infuser".

WATER CIRCUIT EMPTY PRESS OK TO START

The water circuit is empty Press the selector corresponding to "OK" to

deliver water from the spout (D6) until it ows out normally. If the problem persists, make sure the water tank (A17) is fully inserted.

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

PRESS OK TO CLEAN OR TURN DIAL

TURN MILK FROTH ADJUSTMENT DIAL TO CLEAN POSITION

CLEAN

TURN FROTH ADJUSTMENT DIAL

The milk container has been inserted with the froth adjustment dial (E1) in the CLEAN position.

Milk has been delivered recently and the tubes inside the milk container (E) must be cleaned.

The milk container has been inserted with the froth adjustment dial (E1) in the CLEAN position.

To proceed with the CLEAN function, press the selector corresponding to

" OK ", or turn the froth

adjustment dial to one of the milk positions.

Turn the froth adjustment dial (E1) to CLEAN (g. 19).

Turn the dial to the required froth position.

DESCALING NEEDED PRESS OK TO START ~45MIN

REPLACE WATER FILTER PRESS OK TO START

The machine must be descaled. Press the selector corresponding to "OK" to

start descaling or "ESC" to descale later. The descaling procedure described in section "14. Descaling" needs to be performed.

The water softener lter (D7) is exhausted. Press the selector corresponding to "OK" to re-

place or remove the lter, or "ESC" to carry out the procedure later. Follow the instructions in section "16. Water softener lter".

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

GENERAL ALARM: REFER TO USER MANUAL / APP

CLEANING UNDERWAY PLEASE WAIT

The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly,

as described in section "13. Cleaning". If the message is still displayed after cleaning, contact a customer service centre.

The tubes inside the milk container (E) must be cleaned.

Reminds you the lter (D7) must be replaced. Replace the lter or remove it as described in

The machine must be descaled. The descaling procedure described in section

Energy saving is enabled. To disable the func tion, proceed as described in

The appliance is connected to a device via bluetooth.

The appliance has detected impurities in its internal circuits.

Turn the froth adjustment dial (E1) to CLEAN (g. 19).

section "16. Water softener lter".

"14. Descaling" needs to be performed. The appliance may request descaling cycles at very short intervals. This is normal and due to the appliance’s advanced control system.

section "6.8 Energy saving

Wait for the appliance to be ready for use again and reselect the required beverage. Contact Customer Services if the problem persists.

19. TROUBLESHOOTING

Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services.

PROBLEM POSSIBLE CAUSE REMEDY

The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot

water (Please note: you can use the hot water function).

The infuser has cooled down because 2/3 minutes have elapsed since the last coee was made.

A low coee temperature is set.

The coee is weak or not creamy enough.

The coee is delivered too slowly or a drop at a time.

Coee does not come out of one or both of the spouts.

The appliance will not make coee The appliance has detected impurities

The appliance does not come on The power cord connector (D7) is not

The coee is ground too coarsely. Turn the grinding adjustment dial (A5) one

The coee is unsuitable. Use coee for espresso machines.

The coee is not fresh. The coee pack has been opened for too long

The coee is ground too nely. Turn the grinding adjustment dial (A5) one

The coee spouts (A9) are blocked. Clean the spouts with a toothpick (g. 25B).

in its internal circuits. "Cleaning underway" is displayed.

inserted correctly.

It is not plugged into the mains socket. Plug into the mains socket (g. 1).

Before making the coee, heat the infuser by rinsing using the rinse function "6.3 Rinse "").

Set a hotter coee temperature in the menu (see

section "6.9 Coee temperature

click anticlockwise towards "1" while the coffee mill is in operation (g. 13). Continue one click at a time until coee delivery is satisfactory. The eect is only visible after delivering 2 coees (see section "7.5 Adjusting the coee mill").

and has lost its taste.

click clockwise towards "7" while the coee mill is in operation (g. 13). Continue one click at a time until coee delivery is satisfactory. The eect is only visible after delivering 2 coees (see section "7.5 Adjusting the coee mill").

Wait for the appliance to be ready for use again and reselect the required beverage. Contact Customer Services if the problem persists.

Insert the connector as far as it will go in the socket at the back of the appliance

(see section

"" ).

(g. 1)

The main switch (A22) is not turned on. Press the main switch (g. 2).

The infuser cannot be extracted The appliance has not been turned o

correctly

Turn the appliance o by pressing the button (A15) (see section "5. Turning the appliance o").

PROBLEM POSSIBLE CAUSE REMEDY

At the end of descaling, the appliance requests a third rinse

Milk does not ow from the milk spout (E5)

The milk contains large bubbles and squirts out of the milk spout (E5) or there is little froth

The machine emits noises or small pus of steam while not in use

During the two rinse cycles, the water tank (A17) has not been lled to the MAX level

The milk container (E) lid (E2) is dirty Clean the milk container lid as described in sec-

The milk is not cold enough or is not semi-skimmed or skimmed.

The froth adjustment dial (E1) is incorrectly adjusted.

The milk container lid (E2) or froth adjustment dial (E1) are dirty

The hot water connection nozzle (A8) is dirty

The machine is ready for use, or has recently been turned o, and condensate is dripping into the hot vaporiser

Follow the instructions displayed by the appliance, but rst empty the drip tray (A15) to avoid the water overowing.

tion "13.10 Cleaning the milk container".

Use skimmed or semi-skimmed milk at refrigerator temperature (about 5° C). If the result is not as expected, try a dierent brand of milk.

Adjust following the instructions in section "8.

coees".

Clean the milk container lid and dial as described in section "13.10 Cleaning the milk container".

Clean the connection nozzle as described in section "13.11 Cleaning the hot water nozzle".

This is part of normal operation. To limit the phenomenon, empty the drip tray.

making cappuccinos and milk-based

Delonghi ECAM37X.95 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual