CEMB USA M602 User Manual

POWER/SIGNAL (A): WHITE

GROUND (B): BROWN

SHIELD

INTEGRATED EQUIPMENT

M602

Acceleration transducer

BALANCING MACHINES

Functioning

ASTD10120

The M602 transducer picks up seismically the absolute vibrations of
the machine by being fitted directly to the vibrating part.

Technical characteristics

Type of measurement : seismic (absolute vibrations)

Dynamic range : ± 50 g - 0.1 Hz ÷ 10.0 Khz (± 3 db)

Direction of vibrations : any

Sensitivity : 100 mV/g

Transverse sensitivity : ‹ 5%

Accuracy : 0,0003 g

Resonance frequency : › 25 Khz

Protection against shocks : ± 7000 g-pk

Power supply : 2 ÷ 20 mA - 18 ÷ 28 V

Outlet impedance : ‹ 100 ohm

Temperature range : - 48°C ÷ + 121°C

External casing material : 316-L stainless steel

Mounting screws : M8 x 1.25

Weight : 130 g

Protection against
external agents : CEI 70-1 standard, IP66 class

Connection : two wires shielded cable

Assembly

Make a threaded hole M8 x 1.25 the surface to be tested.
The surface where the transducer rests must be flat.

Maintenance

Zero.

Dimensions, fixture and connections drawings

as per front page drawing.

CEMB S.p.A.
23826 MANDELLO del LARIO
TEL. [phone]
www.cemb.com

e mail: [e-mail]

Div. Strumentazioni Via Risorgimento, 9
Fax [phone]

Div. Garage Viale Costituzione, 28
Tel. [phone]
Fax [phone]
Training Center Viale Costituzione, 28

BB A L A N C I N G M A C H I NES