Canon iPF755, iPF755 MFP Basic Guide

Large-Format Printers

Printer Relocation

Printer Driver Installation

This Basic Guide includes three booklets. Be sure to read "

booklet, Printer Operations.

Safety Precautions" in the ﬁ rst

Basic Guide

Printer Operations

Safety Precautions ........................................2

Types of manuals ............................................. 5

Documentation Conventions ............................6

Parts .................................................................8

Attaching the Roll Holder to Rolls ...................12

Loading Rolls in the Printer ............................14

Removing the Roll from the Printer ................16

Loading Sheets in the Printer ......................... 18

Removing Sheets ........................................... 20

Consumables..................................................21

Replacing Ink Tanks .......................................22

Replacing the Maintenance Cartridge ............ 26

Replacing the Printhead ................................. 30

Menu Map.......................................................35

Troubleshooting

Troubleshooting ................................................2

If Roll Paper Jams .......................................... 18

If a Sheet Jams...............................................21

If Paper is Soiled ............................................23

If Printing is Faint ............................................25

If Vertical Lines are Warped or Colors are

Misaligned ..................................................26

If Banding Occurs ...........................................28

If Line Length Does Not Match .......................30

Error Messages .............................................. 32

Printer Relocation

Preparing to Transfer the Printer ......................2

Reinstalling the Printer .....................................6

Printer Driver Installation

Installing the Printer Driver (Windows) ............. 9

Installing the Printer Driver (Mac OS X) .........11

Convenient Printer Driver Features ................13

Read this manual before attempting to operate the printer. Keep this manual in a handy location for future referencing.

ENG

Preparing to Transfer the Printer

Prepare to transfer the printer as follows.

To protect the internal parts in transit, always follow these steps before transferring the printer to a new location. Refer to the Setup Guide for details on packing the printer and installing it after transfer.

Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and damage

• the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.

It is not possible to prepare the printer for transfer if the Display Screen requests you to replace the Maintenance

• Cartridge or check the remaining capacity. Replace the Maintenance Cartridge before transfer preparations. In this case, you will need one new Maintenance Cartridge . (→ , Replacing the Maintenance Cartridge)

Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer

• (that is, when you execute the printer menu item to prepare for transfer).

Remove paper

Remove the paper.

Rolls: (→ , Removing the Roll from the Printer) Sheets: (→

, Removing Sheets)

Access the menu for moving the printer

On the Tab Selection screen of the Control Panel , press

2 3

◄ or ► to select the Settings/Adj. tab (

If the Tab Selection screen is not displayed, press the Menu button.•

Press the OK button. The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Prep.MovePrinter , and then press the OK button.

Once preparations are ﬁ nished, a message on the Display Screen requests you to open the Ink Tank Cover .

If consumables must be replaced, the message Consumables must be replaced. Call for service. is

• shown on the Display Screen and preparation is not possible. If this message is displayed, press the OK button and contact your Canon dealer for assistance.

Ready OK:Setting/Adj. Menu

Maint. cart. Remaining Amount

㪏㪇㩼

Remove the ink tanks

Open the Ink Tank Cover .

Pressing the tip of the Ink Tank Lock Lever horizontally,

lift the Ink Tank Lock Lever to release the lock.

Holding the ink tanks by the grips, remove them.

Preparing to Transfer the Printer

Store the ink tanks you removed with the ink holes (a)

• facing up. Otherwise, ink may leak and cause stains.

Repeat steps 2 and 3 to remove all ink tanks.

Preparing to Transfer the Printer

Push all ink tank lock levers closed until they click into

place.

Close the Ink Tank Cover .

At this point, ink is drawn out from inside the tubes.

Do not remove the Maintenance Cartridge during this process.•

When the process is ﬁ nished, Completed! Turn Power Off!! is displayed.

Pack the printer

Press the Power button and turn off the printer.

Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and

• transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this procedure again.

Disconnect the power cord and interface cable.

Tape down printer covers to secure them, in the reverse

order of tape removal during installation.

Preparing to Transfer the Printer

4 5 6

Remove the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure in reverse.

Repack the Roll Holder , Holder Stopper , and printer in shipping materials, and then package them in a shipping box.

Reinstalling the Printer

The basic workﬂ ow for reinstalling the printer is as follows. For detailed instructions, see the Setup Guide .

Assemble the stand (optional with the iPF650 and iPF655)

The Stand must be assembled by at least two people on a ﬂ at surface. Attempting assembly by yourself poses a

• risk of injury or bending the Stand .

When assembling the Stand , lock the casters.• Before moving the assembled stand, lift the support rod to the

• position shown (a) and unlock all four casters. Moving the stand with the support rod lowered or the casters locked may cause injury or damage the area of installation or basket cloth.

OFF

Referring to the Printer Stand Setup Guide , assemble the Stand .

Install the printer

The iPF750 or iPF755 alone weighs approximately 52 kg (115 lb), and the iPF650 or iPF655, 43 kg (95 lb). Moving

• the printer requires at least three people. Be careful to avoid back strain and other injuries.

When moving the printer, ﬁ rmly grasp the Carrying Handles . The

• printer may be unsteady if you hold it at other positions, which poses a risk of injury from dropping the printer.

Mount the printer on the assembled Stand (optional with the iPF650 and iPF655) and tighten the screws ﬁ rmly.

+ 14 hidden pages