CR-135i
Table of contents
Loading...
Instructions
Please read this manual before operating this scanner.
Connecting the Scanner to a Computer
Connect the CR-135i/CR-190i to a computer as follows. Make sure to
install the software before connecting the scanner to a computer.
• If you connect the computer and turn ON the CR-135i/CR-190i
before installing the software, the following wizard screen appears. If
this happens, click [Cancel], turn OFF the CR-135i/CR-190i, and then
install the software.
The following wizard screen is an example in Windows Vista. When a
similar wizard screen appears in Windows XP/7, click [Cancel].
Wizard Screen (Windows Vista)
2
A Install the software
Install the Scanning Utility for CR-135i/CR-190i in the setup disc
provided with the CR-135i/CR-190i. (See “Installing the
Software,” on p. 19.)
B Connect the scanner to a computer
Connect the CR-135i/CR-190i and the computer with a USB. (See
“Connecting the Scanner to a Computer,” on p. 20.)
C Turn ON the power
Turn ON the power of the CR-135i/CR-190i. (See “Turning ON the
Power,” on p. 21.)
D Automatically installing the device driver
The device driver is installed automatically when Windows
recognizes the CR-135i/CR-190i as new hardware. (See p. 22.)
READ CAREFULLY BEFORE OPENING THE
SEALED DISK PACKAGE
CANON SOFTWARE LICENSE AGREEMENT
IMPORTANT-READ THIS AGREEMENT BEFORE
OPENING THE SEALED DISK PACKAGE! BY
OPENING THE SEALED DISK PACKAGE, YOU ARE
DEEMED TO AGREE TO BE BOUND BY THIS
AGREEMENT.
This legal document is a license agr eement between you and CANON
ELECTRONICS INC. (“Canon”). BY OPENING THE SEALED DISK
PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE
TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE
TERMS OF THIS AGREEMENT, DO NOT OPEN THE SEALED DISK
PACKAGE AND PROMPTLY RETURN THE CANON SCANNER, THE
DISK PACKAGE CONTAINING SCANNER DRIVER SOFTWARE
PROGRAMS AND/OR SCANNER UTILITY SOFTWARE PROGRAM
PROPRIETARY TO CANON OR ITS LICENSOR (THE “SOFTWARE”)
AND THE ACCOMPANYING DOCUMENTATION AND OTHER ITEMS
TO THE PLACE WHERE YOU OBTAINED THEM FOR A REFUND
BEFORE THEY ARE USED OR OPENED OR UNPACKED.
In consideration of the right to use the SOFTWARE, you agree to abide
by the terms and conditions of this Agreement.
1. GRANT OF LICENSE: Canon grants you the personal, non-
exclusive right to use the SOFTWARE only on a single computer. You
may physically tran sfer the SOFTWARE from one computer t o another
provided that the SOFTWARE is used on only one c omputer at any
time.
You shall not assign, sublicense, sell, rent, lea se, loan, convey or
transfer to any third party, or send or bring the SOFTWARE out of the
country where you originall y obtain it to other countries without
required authorization of applicable governme nts, or copy, duplicate,
translate or convert to another programming language the SOFTWARE
or accompanying docume ntation, except as expressly provided
herein.
Except as expressly permitted under the applicable law, you shall not
alter, modify, disa ssemble, decompile or otherwise r everse engineer
the SOFTWARE or accompanying docume ntation and you also shall
not have any third party do s o.
2. BACK-UP COPY: You may make one copy of the SOF TWARE
solely for a back-up purp ose or copy the SOFTWARE onto the
permanent storage devic e (e.g. a hard disk) of your computer and
retain the original for a back-up purpose. Except as express ly
permitted under the applicable law, any oth er copying of the
SOFTWARE is a violation of this Agreement. You must reproduce and
include the copyright notice on the back-up copy.
3. SUPPORT AND UPDATE: Canon, Canon’s affiliate, their
distributor or dealer is not responsible for maintaining or hel ping you
to use the SOFTWARE. No updates, fixes or support will b e made
available for the SOFTWARE.
4. LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY:
Canon, Canon’s affiliate, their distributor or dealer will not guarante e
uninterrupted service, or abs ence or correction of errors. Therefore,
the SOFTWARE is licensed on an “AS IS” basis without warranty of
any kind. The diskette on which the SOFTWARE is recorded i s
warranted against defectiv e material or workmanship under normal
use for a period of ninety (90) days from the date you purchased the
same as evidenced by a receipt or otherwise. The l imited warranty
does not apply if the failure of the diskette resulte d from accident,
abuse or misapplication of the SOFTWARE and sh all not extend to
anyone other than the original us er of the SOFTWARE.
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR DEALER
DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE OR
ACCOMPANYING DOCUMENTATION.
NEITHER CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR NOR
DEALER IS LIABLE FOR ANY LOSS OR DAMAGE INCLUDING
CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS
LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, WHATSOEVER
CAUSED BY OR ARISING OUT OF THE SOFTWARE,
ACCOMPANYING DOCUMENTATION OR THE USE THEREOF.
CANON, CANON’S AFFILIATE, THEIR DISTRIBUTOR OR DEALER
SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY
CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE
SOFTWARE, ACCOMPANYING DOCUMENTATION OR THE USE
THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH
THIRD PARTY.
THE ABOVE IS CANON’S ENTIRE LIABILITY AND YOUR EXCLUSIVE
REMEDY IN CONNECTION WITH THE SOFTWARE AND
ACCOMPANYING DOCUMENTATION.
5. TERM: This Agreement is effect ive upon opening the sealed disk
package and remains in effect until terminate d. You may terminate this
Agreement by destroying the SOFTWARE a nd any copy thereof. This
Agreement will also terminate if you fail to comply with any of the
terms of this Agreement. In addition to Canon enforcing its respective
legal rights, you must then promptly dest roy the SOFTWARE and any
copy thereof.
6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The
SOFTWARE is provided with RESTRICTED RIGHTS. Use, duplication
or disclosure is subject to restrictions as set forth in ei ther
subparagraph (c) (1) ( ii) of the Rights in Technical Data and Computer
Software clause at DFARs 252.227- 7013 or subparagraph (c) (1) and
(2) of the Commercial C omputer Software Restricted Rights Clause at
FAR 52.227-19, as applicable.
7. SEVERABILITY: In the event that provision of this Agreement is
declared or found to be illega l by any court or tribunal of competent
jurisdiction, such provision shall be null and void with respect to the
jurisdiction of that court or t ribunal and all the remain ing provisions
of this Agreement shall remain in full force and effect.
8. ACKNOWLEDGEMENT: BY OPENING THE SEALED DISK
PACKAGE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS
AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS
TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS
AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMEN T OF
AGREEMENT BETWEEN YOU AND CANON CONCERNING THE
SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS
OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER
COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO
THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS
AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY
AUTHORIZED REPRESENTATIVE OF CANON.
Should you have any questions c oncerning this Agreement, or if you
desire to contact Canon for an y reason, please write to Canon’s local
affiliate.
3
FCC REGULATIONS (For 120V model)
Check Reader, Model M111071/M11 1021
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) th is device must accept any interferen ce
received, including interference that may cause un desired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designe d to provide reasonable protection against
harmful interference in a residential installation. Thi s equipment generates, uses, and can radiate radio
frequency energy and, if not installed and us ed in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment doe s cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separa tion between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or a n experienced radio/TV technician for help.
Use of shielded cable is required to comply with clas s B limits in Subpart B of Part 15 of FCC Rule s.
Do not make any changes or modification s to the equipment unless otherwise specified in the manual. If
such changes or modifications should be ma de, you could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Succes s NY 11042, U.S.A.
Tel. No. (516)328-5000
RADIO INTERFERENCE REGULATIONS (For 120V models)
This digital apparatus does not e xceed the Class B limits for radio noise emissions from d igital apparatus
as set out in the interference-causing equipm ent standard entitled “Digital Apparatus”, ICES-003 of the
Industry Canada.
RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE (For
120V models)
Cet appareil numérique respecte les limites de bruits ra dioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”,
NMB-003 édictée par l’Industrie Canada.
International ENERGY STAR® Office Equipment Program
As an ENERGY STAR® Partner, CANON ELECTRONICS INC. has determined that this
machine meets th e ENERGY STAR® Program guidelines for energy efficiency.
The International ENERGY STAR® Office Equipment Program is an international program
that promotes energy saving through the use of computers and other office equip ment.
effectively reduce energy consumption. It is an open system in which business proprietors can partic ipate
voluntarily. The targeted products are office e quipment, such as computers, monitors, printers, fax,
machine, copiers, and scan ners. The standards and logos are uniform among partic ipating nations.
This model doesn’t provide “setting option s” for power management.
The program backs th e development and dissemination of products with functions that
European Union (and EEA) only.
This symbol indicates that this pr oduct is not to be disposed of with your household waste,
according to the WEEE Direct ive (2002/96/EC) and your national law. This product sho uld
be handed over to a designated collection po int, e.g., on an authorized one-for-one basis
when you buy a new similar pr oduct or to an authorized collection site for recyclin g waste
electrical and electronic equipme nt (EEE). Improper handling of this type of waste could hav e
a possible negative impa ct on the environment and human he alth due to potentially hazardous substanc es
that are generally associa ted with EEE. At the same time, your cooperation in the corre ct disposal of this
product will contribute to the effective usage of natural res ources. For more information about where you
can drop off your waste equipment for recycling, pleas e contact your local city office, waste authority,
approved WEEE scheme or your household waste disposal servic e. For more information regarding return
and recycling of WEEE products, please visit www.ca non-europe.com/environment.
(EEA: Norway, Iceland and Liechte nstein)
Für EMVG
Dieses Produkt ist zum Gebrau ch im Wohnbereich, Geschäfts-und Gewerbebereich sow ie in
Kleinbetrieben vorgesehen .
Model Names
The following names may be provided for the safety regulations in each sales region of the Check Reader.
CR-135i: Model M111071
CR-190i: Model M111021
4
Trademarks
• Canon and the Canon logo are registered trademarks, of Canon Inc.
in the United States and may also be trademarks or registered
trademarks in other countries.
• imageFORMULA is a trademark of CANON ELECTRONICS INC.
• Microsoft, Windows, Windows Vista, and Windows 7 are registered
trademarks or trademarks of Microsoft Corporation in the United
States and other countries.
• Microsoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
• Adobe, Acrobat, and Adobe Reader are registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and
other countries.
• Other product and company names herein are, or may be, the
trademarks of their respective owners.
• Ranger is a trademark of Silver Bullet technology, Inc.
Copyright
Copyright 2010 by CANON ELECTRONICS INC. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocop ying and recording, or by any information storage or retrieval system
without the prior written permission of CANON ELECTRONICS INC.
Disclaimers
The information in this document is subjec t to change without notice.
CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,
EITHER EXPRESS OR IMPLIED, EXPECT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION,
THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OF USE OR NON-INFRINGEMENT. CANON ELECTRONICS INC. SHALL NOT BE LIABLE FOR
ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR
EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.
CANON ELECTRONICS INC. IS NOT LIABLE FOR THE STORAGE AND HANDLING OF DOCUMENTS
SCANNED WITH THIS PRODUCT, OR THE STORAGE AND HANDLING OF THE RESULTING SCANNED
IMAGE DATA.
IF YOU INTEND TO DISCARD THE ORIGINALS OF THE SCANNED DOCUMENTS, YOU ARE
RESPONSIBLE FOR INSPECTING THE SCANNED IMAGES AND VERIFYING THAT THE DATA IS INTACT.
THE MAXIMUM LIABILITY OF CANON ELECTRONICS INC. UNDER THIS WARRANTY IS LIMITED TO THE
PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY.
5
INTRODUCTION
Thank you for purchasing the Canon Check Reader CR-135i/CR-190i.
Please read this manual thoroughly before using the machine in order
to familiarize yourself with its capabilities, and to make the most of its
many functions.
Manuals for the CR-135i/CR-190i
The following manuals are provided with the CR-135i/CR-190i. Be sure
to read these manuals thoroughly before using the scanner. (The
Installation Guide and the Operation & Maintenance Guide are
extracted from the Instructions.) Electronic manual is stored as a PDF
file on the supplied Setup Disc and requires Adobe Reader to open.
(You can download Adobe Reader from the Adobe Web site.)
Installation Guide (Supplied with the scanner/Electronic Manual)
Describes the procedure for setting up the CR-135i/CR-190i for
scanning. Set up the CR-135i/CR-190i in accordance with the
Installation Guide. For details on the CR-135i/CR-190i, refer to the
Instructions (electronic manual).
Operation & Maintenance Guide (Supplied with the scanner/
Electronic Manual)
Describes the basic operations for using the CR-135i/CR-190i,
troubleshooting, and maintenance. For details on the settings of the
CR-135i/CR-190i, refer to the Instructions (electronic manual).
Instructions (Electronic Manual): This Manual
Describes how to use the scanner, and includes instructions for
configuring the scanner settings, as well as handling, maintenance,
and troubleshooting information.
6
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures,
restrictions, handling precautions, and instructions that should be
observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death or
injury to persons if not performed correctly. To use the machine safely,
always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to
persons, or damage to property if not performed correctly. To use the
machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read
these items carefully to operate the machine correctly, and avoid
damaging the machine.
NOTE
Indicates a clarification of an operation, or contains additional
explanations for a procedure. Reading these notes is highly
recommended.
Table of Contents
Connecting the Scanner to a Computer............................................... 2
INTRODUCTION ................................................................................. 6
Manuals for the CR-135i/CR-190i ............................................ 6
Symbols Used in This Manual.................................................. 6
Important Safety Instructions ............................................................... 9
Handling ................................................................................... 9
Installation Location ............................................................... 10
Power Supply ......................................................................... 11
Moving the Scanner ............................................................... 11
Introduction to the CR-135i/CR-190i.................................................. 12
Features of the CR-135i/CR-190i ................................................ 12
Features ................................................................................. 12
Packaging: What Is in the Box? ................................................... 13
Part Names .................................................................................. 14
Front View .............................................................................. 14
Rear View............................................................................... 16
Connector............................................................................... 16
Exterior Dimensions ..................................................................... 16
Preparation Before Use ..................................................................... 17
Setting Up the Scanner ................................................................ 17
Checking Your Operating Environment ....................................... 18
Installing the Software.................................................................. 19
Installing the Scanning Utility ................................................. 19
Connecting the Scanner to a Computer....................................... 20
USB Connections ................................................................... 20
Connecting the Power Cord ................................................... 21
Turning ON and OFF the Power .................................................. 21
Turning ON the Power ........................................................... 21
Turning OFF the Power .......................................................... 22
Preparing the Ink Cartridge .......................................................... 23
About the Ink Cartridge .......................................................... 23
Setting the Ink Cartridge and Adjusting the Print Position ..... 23
Software............................................................................................. 25
How to Use the Software ............................................................. 25
How to Use the Scanning Utility ............................................. 25
How to Use the Ranger .......................................................... 27
Uninstalling the Software ............................................................. 28
Document Feeding and Scanning...................................................... 30
Documents ................................................................................... 30
Document ............................................................................... 30
Envelope ................................................................................ 31
Using Ultrasonic Double Feed Detection ............................... 32
Placing Documents ................................................................ 32
Document Feeding and Scanning................................................ 33
Scan Procedure ..................................................................... 34
Separation OFF Mode............................................................ 36
Troubleshooting ................................................................................. 37
When the Scanner Is Not Recognized ......................................... 37
Clearing Paper Jams ................................................................... 37
Feeding Trouble ........................................................................... 39
When the Scanned Image Is Not Normal .................................... 41
7
Maintenance ...................................................................................... 42
Daily Cleaning .............................................................................. 42
Cleaning the Main Unit ........................................................... 42
Cleaning the Feed Path ......................................................... 42
Cleaning the Scanning Glass and Rollers.............................. 44
Cleaning the Magnetic Heads ................................................ 47
Cleaning the Ink Jet Nozzles .................................................. 48
Cleaning with the Cleaning Cards (U.S.A. Only).................... 49
Maintenance ................................................................................ 50
Replacing the Ink Cartridge .................................................... 50
Replacing the Ink Disposal Tank............................................ 51
Replacing the Rollers ............................................................. 53
Adjusting the Separation Roller Gap ...................................... 56
Specifications ............................................................................... 57
Scanner Specifications ........................................................... 57
Index .................................................................................................. 58
8
Important Safety Instructions
Handling
WARNING
■ Never install and operate the scanner near flammable substances,
such as alcohol, paint thinner, benzene, or any other type of volatile
solution.
■ Never damage or modify the power cord, and never place heavy
objects on the power cord.
■ Always make sure that your hands are dry when you are handling
the power cord or power plug. Never grasp the power plug when
your hands are wet.
■ Never plug the scanner into a multiplug power strip.
■ Never bundle, wrap, or tie the power cord around itself or another
object. Connect the power plug securely into the power outlet.
■ Use only the power cord and power plug provided with the scanner.
■ Never attempt to disassemble or modify the scanner.
■ Never use flammable aerosol products near the scanner.
■ Before you clean the scanner, turn the power OFF and disconnect
the power cord from the power outlet.
■ To clean the scanner’s exterior, use a firmly wrung cloth, moistened
slightly with water or mild detergent. Never use any type of volatile
solution, such as alcohol, benzene or paint thinner.
■ If you hear strange sounds, detect smoke or abnormal heat, sense
vibration, or smell odd odors around the scanner, turn OFF the
power switch immediately and disconnect the power cord from the
power outlet. Contact your local authorized Canon dealer or service
representative to have the scanner serviced.
■ Handle the scanner with care. Avoid shock and vibration to the
scanner caused by reckless handling. If you suspect the scanner
has been accidentally damaged, turn OFF the power switch
immediately and disconnect the power cord from the power outlet.
Contact your local authorized Canon dealer or service
representative to have the scanner serviced.
■ Before you move the scanner, always turn OFF the power and
disconnect the power cord from the power outlet.
■ This product emits low level magnetic flux. If you use a cardiac
pacemaker and feel abnormalities, please be away from this
product and consult your doctor.
CAUTION
■ To avoid damage to the scanner, never place the scanner on an
unstable or vibrating
causing injury.
■ To avoid overheating and causing a fire, never block the air vents on
the back of the scanner.
■ Keep all liquids, beverages, or any type of liquid, and clips, staples,
necklaces, or other metal objects away from the scanner. If you
accidentally spill liquid or drop a metal object into the scanner, turn
OFF the power immediately and disconnect the power cord from the
power outlet. Contact your local authorized Canon dealer or service
representative to have the scanner serviced.
■ Never install the scanner in humid or dusty locations. Doing so may
cause a fire or electrical shock.
■ Never place heavy objects on top of the scanner, as these objects
may tip or fall over, and cause injury.
surface. The scanner may tip or fall over,
9
■ When you remove the power cord, grip it by the power plug head.
Never attempt to disconnect the power cord from the power outlet
by pulling on the power cord. Doing so may damage or expose the
cord’s internal wiring, and cause a fire or electrical shock.
■ Keep the area around the power outlet clear of all obstacles so you
can disconnect the power cord easily at all times.
■ Never spill water or volatile solutions (alcohol, benzene, paint
thinner) into the scanner. Doing so may cause a fire or electrical
shock.
■ When the scanner is not being used for a long period of time,
disconnect the power cord from the power outlet.
■ Avoid wearing loose fitting clothing, dangling jewelry, long ties, or
long hair that could become entangled with moving parts, especially
the rollers that feed paper into the scanner. If such objects become
entangled, immediately disconnect the power plug from the power
outlet to stop the scanner.
■ Be careful when you are loading a document or clearing a paper
jam. It is possible that the paper edges may cut your fingers.
■ Do not open the Maintenance Cover while the scanner is operating.
Doing so may result in a malfunction or injury.
■ Do not touch the pins and contacts on the scanner’s connector with
your hands. Doing so may result in a malfunction.
■ Do not touch anything except the operation buttons when the jogger
is operating (CR-190i only) or documents are being fed.
■ Do not turn the scanner upside down. The ink may leak from the ink
disposal tank.
Installation Location
3.9" (100 mm)
5" (125 mm)
14" (356 mm)
18.3" (466 mm)
27.8" (706 mm)
For operation, maintenance, and ventilation, make sure that there is
enough space around the scanner, as shown in the illustration above.
Avoid placing the scanner in the following places. It may cause a
malfunction and adversely affect the scanner or your computer.
• Places exposed to direct sunlight
If installation in such places is unavoidable, provide a curtain or
similar object to shade the scanner.
• Places subject to dust and fumes
Dust and cigarette fumes adversely affect the components inside the
scanner.
• Near running water, a heat source, water vapor, or in an area, such
as a laboratory exposed to ammonia gas, paint thinner, or other
volatile chemicals
• Places subject to excessive vibration and shock
10
• Places subject to rapid changes in temperature or humidity
Condensation occurring inside the scanner may impair image
quality. Place the scanner in a room that is within the following range:
Room temperature: 50°F to 90.5°F (10°C to 32.5°C)
Relative humidity: 20% to 80% RH
Use the recommended operating environment for the ink cartridge
when using the imprinter.
• Near electronic equipment or heavy equipment that generates a
strong magnetic field, such as a speaker, TV, and radio
Power Supply
• Connect only to a power outlet of the rated voltage and power supply
frequency (either 120 V, 60 Hz or 220-240 V, 50/60 Hz, depending on
your region).
• Make sure that the scanner is connected to an independent power
outlet. Do not plug the scanner into an outlet shared with another
device. If you use an extension cord, make sure that the extension
cord is rated for the current requirements of the scanner.
• If you are unsure of anything relating to the power supply, contact
your local authorized Canon dealer or service representative for
further information.
• Never place an object on top of the power cord or step on the power
cord.
• Never bundle the power cord or wrap the cord around an object,
such as a table leg.
• Do not tug on the power cord. When you remove the power cord, grip
it by the power plug head.
• Keep the area around the power outlet free of obstacles.
Moving the Scanner
When you move the CR -135i/CR-190i, hold it firmly with both hands and
carry it carefully. Do not hold the scanner by the Eject Stopper. The
scanner weighs approximately 18.5 lb (8.4 kg).
WARNING
When moving the scanner, be sure to turn OFF the power and
remove any cables. If the cables are not removed before moving
the scanner, you may damage the plugs or connector by forcibly
pulling them out.
11
Introduction to the CR-135i/CR-190i
This chapter describes the features of the CR-135i/CR-190i scanner,
what comes packaged in the box, and the names and functions of
parts on the scanner.
Features of the CR-135i/CR-190i
The Canon Check Reader CR-135i/CR-190i is a scanner with magnetic
heads that can read checks and other documents that are printed with
MICR (Magnetic Ink Character Recognition) compatible fonts, and is
capable of OCR (Optical Character Recognition). The CR-135i/
CR-190i is compact and can handle large volumes of checks.
Features
High-Speed Scanning
The CR-135i performs high-speed scans of check-size documents at
135 cpm (200 dpi resolution).
The CR-190i performs high-speed scans of check-size documents at
190 cpm (200 dpi resolution).
Supports Large Documents
Documents up to 4.3" x 9.6" (108 mm x 245 mm) can be scanned.
High Durability
The scanner has a high durability of 24 million scans.
Compact Size
8.4" (H) x 18.7" (W) x 10.7" (D) (214 mm (H) x 476 mm (W) x 272 mm (D))
12
Supports Black-and-White (Binary) and Grayscale Output
Reads MICR Characters
A magnetic head is used to scan MICR characters that have been
printed with magnetic ink or toner.
Supports OCR (Optical Character Recognition)
Character images, such as E13B, OCR-A, OCR-B, and check writ er are
recognized as characters by the OCR function.
Easy to Maintain
Large Maintenance Covers make handling paper jams and cleaning
easy.
Jogger Mechanism Is Standard (CR-190i only)
A jogger mechanism, which uses vibration to align documents, comes
standard equipped with the CR-190i.
Separation OFF Mode
You can scan the following documents:
• Thick documents
• Documents that contain two or more pages together as one
document
• Documents that have a rough surface
• Duplicate forms that have sticky edges
Paper Thickness Adjustment Mechanism
Adjust the Separation Roller gap to the thickness of the paper being
fed.
Three Eject Pockets and Automatic Sorting Mechanism
The scanner has three Eject Pockets and the documents are
automatically ejected to each pocket according to sort methods. The
scanner fits various scan operations using this mechanism.
Ultrasonic Double Feed Detection and Double Feed Detect
OFF Button (Scanning Utility for CR-135i/CR-190i)
The scanner detects double-fed documents using ultrasonic, and can
turn OFF the function with the Function Button.
Drop-Out Color
This function enables drop-out scanning of a specific color in the
document.
Imprinter Is Standard Equipment
An imprinter mechanism, which prints text (4 lines) or a bitmap on
documents as they are scanned, comes standard equipped with the
scanner. The imprinter’s ink cartridge is not included, and must be
purchased separately. (See “About the Ink Cartridge,” on p. 23.)
Eject Pocket Full Detection (Scanning Utility for CR-135i/
CR-190i)
Detects when any one of the three Eject Pockets is full and stops
scanning. (See “Scan Procedure,” on p. 34.)
Placing Additional Documents
You can place additional documents while the machine is scanning.
Replaceable rollers and ink disposal tank
You can replace the rollers (Pickup Roller, Feed Roller, and Separation
Roller) and the ink disposal tank.
Packaging: What Is in the Box?
Make sure that you have everything shown below. Check every item
you have removed from the box. If any items are missing, contact your
local authorized Canon dealer.
Setup Disc Power Cord
CR-135i/CR-190i
*1 The power cord varies, according to the country of purchase.
*2 For the United States and Canada only.
Warranty Card
User Registration Card
Installation Guide
Operation & Maintenance Guide
*2
USB Cable
*1
*2
13
Part Names
This section describes the names and functions of each part. Before you connect the CR-135i/CR-190i, familiarize yourself with its parts and their
functions.
Front View
Operation Buttons
JOG: Uses vibration to align the documents. (Jogger)
This button is available only on the CR-190i.
Function (F): You can assign this button to any function from
an application. When using the accompanying
Scanning Utility for CR-135i/CR-190i, switches the
double feed detection ON/OFF.
START: Starts scanning operations. Press and hold
this button during a paper jam to eject the
jammed document.
STOP: Stops scanning operations.
Roller Cover
Scanner Unit
This unit scans the documents.
Magnetic Head for MICR
Reads MICR characters that have been printed with magnetic ink.
Built-in Nozzle Cleaning Pad
Ink Cartridge
Ink cartridge is not included. Purchase the ink cartridge
separately. (See “About the Ink Cartridge,” on p. 23.)
Power Switch
Front Maintenance Cover
Open this cover to clear paper jams or to clean
the scanner.
14
Scanner Unit
This unit scans the documents.
Back Maintenance Cover
Open this cover to clear paper jams or to clean the scanner.
Eject Pocket
Documents are separated with flappers
into three pockets. (See p. 35)
Eject Stopper
Pull out the Eject Stopper to prevent
documents from falling off the output
tray.
Adjustment Dial Cover
Adjustment Dial
Adjust the Separation Roller gap if feeding errors
occur too frequently. (See “Adjusting the
Separation Roller Gap,” on p. 56.)
Top Cover
Separation OFF Mode Button
Use this button when you want to scan the following documents (See
“Separation OFF Mode,” on p. 36.):
• Thick documents
• Documents that contain two or more pages together as one document
• Documents that have a rough surface
• Duplicate forms that have sticky edges
15
Rear View
Ink Disposal Tank Pocket
Exterior Dimensions
Units: inches (units in parenthesis are millimeters)
22.9" (581 mm) (with the eject stopper open)
18.7" (476 mm)
Air Vent
Power Cord Connector
Connect the power cord provided with the
scanner to this connector.
Connector
CAUTION
To avoid overheating and causing a fire, never block the air vents on the
back of the scanner.
Connector
USB Connector
Connect a Hi-Speed USB 2.0 compatible
cable. (See “USB Connections,” on p. 20.)
16
7" (177 mm)
10.7" (272 mm)
8.4" (213.5 mm)
5.4" (137 mm)
Preparation Before Use
This chapter describes how to prepare the scanner to scan
documents.
Setting Up the Scanner
Perform the following steps to set up the CR-135i/CR-190i. Refer to the
section for each step for details about that step.
A Check your operating environment. (See “Checking Your
Operating Environment,” on p. 18.)
B Install the software. (See “Installing the Software,” on
p. 19.)
Install the Scanning Utility provided with the CR-135i/CR-190i.
C Connect the scanner to a computer. (See “Connecting
the Scanner to a Computer,” on p. 20.)
D Turn ON the power. (See “Turning ON the Power,” on
p. 21.)
E Automatically installing the device driver. (See p. 22.)
The device driver is installed automatically when Windows
recognizes the CR-135i/CR-190i.
IMPORTANT
• To have the device drivers installed automatically when the computer
recognizes the CR-135i/CR-190i, the software needs to be installed
before the CR-135i/CR-190i is connected to the computer.
• If you connect the computer and turn ON the CR-135i/CR-190i before
installing the software, the following wizard screen appears. If this
happens, click [Cancel], turn OFF the CR-135i/CR-190i, and then install
the software.
The following wizard screen is an example in Windows Vista. When a
similar wizard screen appears in Windows XP/7, click [Cancel].
Wizard Screen (Windows Vista)
17
Checking Your Operating Environment
The following computer system requirements are recommended for
using the CR-135i/CR-190i.
Operating Systems:
• Microsoft Windows XP (32bit) SP3 or later
• Microsoft Windows XP (64bit) SP2 or later
• Microsoft Windows Vista (32/64bit) SP1 or later
• Microsoft Windows 7 (32/64bit)
Specifications:
• CPU: Intel Core2 Duo 3.0 GHz or faster
• Memory: 1 GB or more
• USB 2.0 interface
Interface Cable
• Use the cable provided or a Hi-Speed USB 2.0 interface cable to
connect to the computer’s USB port.
IMPORTANT
• If you use the USB interface that was provided as standard with your
computer:
• Use the most recently available USB 2.0 driver provided by Microsoft.
Contact your local authorized Canon dealer for more detailed
information.
• Not all USB interfaces provided as standard with personal computers
are guaranteed. Contact your local authorized Canon dealer for more
detailed information.
• Scanning speeds are slower if your computer’s standard USB interface
is USB 1.1.
• You should use the USB cable originally bundled with the scanner or a
Hi-Speed USB 2.0 compatible cable.
• If the CPU, memory, interface card, and other specifications do not satisfy
the installation requirements, the scanning speed may be greatly reduced
and transmission may take longer.
• Even if the computer satisfies the recommended specifications, the
scanning speed may vary, depending on the scan settings.
18
Loading...