Brother LT2-B832 Manual

Notes for using this parts book

I. This book is applicable to sewing machines which have the same plate number as shown on the cover of this book (or correction sheet).

2. The symbol I~ I in the "Parts No.~' column indicates that the parts is not available for supply. If, however, there is a number in the ffAssembly No." column, the parts can be ordered as an assembly. Please, therefore, order by using the Assembly No.

3.This book was prepared based on information available in June, I983.

4.Parts are subject to changes in design w.ithout prior notice.

Anmerkungen zum Gebrauch dieses Stilcklistebuches

I.Dieses Buch bezieht sich auf die Nahmaschinen mit derselben Kennungsnummer wie auf diesem Buchumschlag (oder auf dem Korrekturblatt).

2.Dieses Zeichen I~I in der Spalte "Teilnummer" bedeutet, daB dieser Teil nicht lieferbar ist. Wenn jedoch in der Spalte "Geratesatznummer" eine Nummer steht, kann dieser Teil als ein Gerateteilsatz bestellt werden. Bestellen Sie daher bitte mit dieser Geratesatznummer.

3. Dieses Buch basiert auf den lnformationen vom J uni, 1983.

4. Modellanderungen sind vorbehalten.

Notes sur l'utilisationde ce manuel de pieces detachees

I.Ce manuel est destine aux machines a coudre ayant le m@me numero de plaque montre sur Ia couverture de ce manuel (ou sur Ia feuille de corrections).

2.Le symbole I~ Idans Ia colonne "No de piece" signifie que la piece ne peut Stre fournie. Si, dans la colonne "No jeu de pees", il y a un numero de nomenclature, Ia piece peut Stre commandee comme faisant partie d'un jeu de pieces. Done, pour toute commande, veuillez specifier le No de jeu de pieces.

3.Ce manuel a ete fait d'apres les renseignements valables au mois de Juin, 1983.

4.Les pieces peuvent Stre sujettes a des modifications sans preavis.

~

Notas para usar este Libro de Piezas

I.Este libro sirve para todas las maquinas de coser que llevan Ia misma placa de identificaci6n que Ia que se puede ver en Ia tapa de este libro (o en Ia hoja de erratas).

2.El simbolo I~ I, que se encuentra en Ia columna del "Nfimero de Pieza", quiere decir que no se dispone de dicha pieza: sola. Cuando, empero, hay un nfimero en Ia columna del "Numero de Juego", se podra ordenar Ia pieza con todo el juego. Por lo tanto, sera mejor hacer el pedido recurriendo al nfimero del juego respectivo.

3.Este libro ha sido compilado basandose en los datos de que se disponia en junio de 1983.

4.Las piezas quedan sujetas a cambios de disefio sin aviso previo.

~I

~·

'\

~

From the library of: Superior Sewing Machine & Supply LLC

	CONTENTS
A.	Machine body ........................................	1
B.	Threading mechanism (I) ..........................	2
B.	Threading mechanism (2)(Standard) ............	2
B.	Threading mechanism (3)
	( -400A· -700A) ...................................	3
C.	Upper shaft mechanism ............................	3
D.	Needle bar rocking mechanism ...................	4
E.	Presser foot mechanism (I) ........................	5
E. Presser foot mechanism (2)
	(Standard· -400A) .................................	5
E.	Presser foot mechanism (3)( -700A) ............	6
F.	Feed mechanism (I).................................	6
F.	Feed mechanism (2)(Standard) ...................	7
F.	Feed mechanism (3)( -400A· -700A) ..........	7
G.	Quick reverse mechanism( -400A· -700A) ..........	8
H.	Feed shaft mechanism ..............................	8
J.	Rotary hook mechanism ( 1).......................	9
J.	Rotary hook mechanism (2) (Standard) .........	9

J.Rotary hook mechanism (3)

	( -400A· -700A) ..................................	10
K.	Lower shaft mechanism ...........................	I0
L.	Lubrication (I) .....................................	II
L.	Lubrication (2)(Standard) ........................	12
L.	Lubrication (3)( -400A· -700A) ...............	13
M. Thread wiper mechanism( -400A· -700A) ...		14
N. Quick reverse switch mechanism
	( -400A· -700A) ..................................	14
P.	Thread trimmer mechanism
	( -400A· -700A) ..................................	15
Q.	Tension release mechanism
	( - 400A • - 700A) ..................................	I6
R.	Synchronizer (I)( -400A· -700A) .............	17
S.	Gauge parts mechanism ...........................	17
T. Control box mechanism (I)
	( -700A BROTHER Motor) .....................	18
U. Treadle mechanism (Option parts)...............		19
Z.	Accessories ( I) ......................................	20
Z.	Accessories (2) ......................................	2 I
Gauge parts list. .........................................		22
INDEX ...................................................		24

	INHALTSVERZEICHNIS
A.	Maschinengehause ...................................	I
B.	Fadenftihrungsvorrichtung (I) ....................	2
B.	Fadenflihrungsvorrichtung (2)(Norm) ...........	2
B.	Fadenftihrungsvorrichtung (3)
	( -400A· -700A) ...................................	3
C.	Obere Welle ..........................................	3
D.	Nadelstangenbetatigung ............................	4
E.	StoffdrUckerfuB (I) ..................................	5
E.	StoffdrUckerfuB (2)(Norm· -400A) ..............	5
E.	StoffdrUckerfuB (3)( -700A) ......................	6
F.	Transportvorrichtung (I) ...........................	6
F.	Transportvorrichtung (2) (Norm) .................	7
F.	Transportvorrichtung (3)( -400A· -700A) ....	7
G. Umkehr( -400A· -700A) .........................		8
H.	Transport welle ......................................	8
J.	Greifervorrichtung (I) ..............................	9
J.	Greifervorrichtung (2)(Norm) ....................	9
J.	Greifervorrichtung (3)( -400A· -700A) .......	10
K.	Untere welle .........................................	10
L.	Schmierung (I) .....................................	II
L.	Schmierung (2)(Norm) ............................	12
L.	Schmierung (3)( -400A· -700A) ...............	13
M. Fadenwischvorrichtung( -400A· -700A) .....		14
N. Umkehrschalter( -400A· -700A) ...............		14
P.	Fadenabschneidevorrichtung
	( -400A· -700A) ..................................	15
Q.	Spannung sverminderung svorrichtung
	( -400A· -700A) ..................................	16
R.	Synchron isator (I)(- 400A • - 700A) ...........	17
S.	Lehren ................................................	17
T.	Schaltkasten ( I)
	( -700A BROTHER Motor) .....................	18
U.	Pedal (Option parts) ...............................	19
Z.	Zubehor ( 1) .........................................	20
Z.	Zubehor (2) .........................................	21
Lehrenliste................................................		22
VERZEICHNIS .........................................		24

From the library of: Superior Sewing Machine & Supply LLC

	TABLE DES MATIERES
A.	Corps de Ia machine................................	I
B.	Mecanisme de Jenfilage (I) ........................	2
B.	Mecanisme de Jenfilage (2)(Standard). ..........	2
B. Mecanisme de Jenfilage (3)
	( -400A· -700A) ...................................	3
C.	Mecanisme de larbre superieur ....................	3
D.	Mecanisme de balancement de Ia barre
	a aiguille ..............................................	4
E.	Mecanisme du pied presseur (I) ..................	5
E.	Mecanisme du pied presseur (2)
	(Standard· - 400A) .................................	5
E.	Mecanisme du pied Presseur (3)( -700A) ......	6
F.	Mecanisme de lentrainement (I) ..................	6
F.	Mecanisme de lentrainement (2)(Standard) .....	7
F.	Mecanisme de lentrainement (3)
	( -400A· -700A) ...................................	7
G.	Mecanisme de marche arriere rapide
	( -400A· -700A) ...................................	8
H.	Mecanisme de l'arbre entrainement. ..............	8
J.	Mecanisme du crochet rotatif (I) .................	9
J.	Mecanisme du crochet rotatif (2)(Standard) ....	9

J.Mecanisme du crochet rotatif (3)

	( -400A· -700A) ..................................	10
K.	Mecanisme de l'arbre inferieur ...................	I0
L.	Lubrification (I)....................................	II
L.	Lubrification (2)(Standard) ......................	12
L.	Lubrification (3)( -400A · - 700A) .............	13
M. Mecanisme de tire-fit( -400A· -700A) ........		14
N.	Mecanisme de interrupteur de marche arriere
	rapide( -400A· -700A) ..........................	14
P.	Mecanisme de coupe-fill ( -400A • -700A) ....	15
Q.	Mecanisme de relache-tension
	( - 400A • - 700A) ..................................	16
R.	Synchronisateur (I)(- 400A · - 700A) ..........	17
S.	Pieces d'ecartement .................................	17
T.	Mecanisme du boitier de controle (I)
	( - 700A BROTHER Moteur)....................	18
U.	Mecanisme de Ia pedale(Pieces en option) .....	19
Z.	Accessoires (I) ......................................	20
Z.	Accessoires (2) ......................................	21
Liste des pieces d'ecartement ..........................		22
INDEX ...................................................		24

	INDICE
A.	Denominaci6n del mecanismo ....................	I
B.	Mecanismo de Ia enhebrado (I) ..................	2
B.	Mecanismo de Ia enhebrado (2)(Norma) .......	2

B.Mecanismo de Ia enhebrado (3)

	( -400A· -700A) ...................................		3
C.	Mecanismo de Ia eje superior .....................		3
D.	Mecanismo de oscilaci6n de Ia barra de aguja .......		4
E.	Mecanismo del prensa telas (I) ...................		5
E.	Mecanismo del prensa telas (2)
	(Norma· -400A)....................................		5
E.	Mecanismo del prensa telas (3)( -700A) .......		6
F.	Mecanismo de Ia alimentaci6n (I) ...............		6
F.	Mecanismo de Ia alimentaci6n (2)(Norma) ....		7
F.	Mecanismo de Ia alimentaci6n (3)
	( -400A· -700A) ...................................		7
G.	Mecanismo de inversion rapida
	( -400A· -700A) ....................	, .............. 8
H.	Mecanismo de Ia eje alimentacion................		8
J.	Mecanismo del cangrejo (I) .......................		9
J.	Mecanismo del cangrejo (2)(Norma) ............		9

J.Mecanismo del cangrejo (3)

	( -400A· -700A) ..................................	10
K.	Mecanismo de Ia eje inferior .....................	10
L.	Lubricacion (I) .....................................	II
L.	Lubricacion (2)(Norma) ..........................	12
L.	Lubricacion (3)( -400A· -700A). ..............	13
M. Mecanismo de limpiador de hilos
	( -400A· -700A) ..................................	14
N.	Mecanismo de conmutador de inversion rapida
	( -400A· -700A) ..................................	14
P.	Mecanismo de recortadora de orillos
	( -400A· -700A) ..................................	15
Q.	Mecanismo de liberador de tension
	( -400A· -700A) ..................................	16
R.	Sincronizador (I)( -400A· -700A) ............	17
S.	Piezas calibradoras .................................	17
T.	Mecanismo del caja de controles (I)
	(- 700A BROTHER Motor). ....................	18
U.	Mecanismo de Ia pedal (Piezas opcion). ........	19
Z.	Accesorios (I).......................................	20
Z.	Accesorios (2) .......................................	21
Lista de piezas calibradoras ...........................		22
INDICE ..................................................		24

From the library of: Superior Sewing Machine & Supply LLC

A. Machine body I Maschinengehause

Corps de Ia machine I Denominaci6n del mecanismo

29------	4	1

ll 7 28~

		'%--31
21----"'ll		~30
~
26~

Ref. No.	Name of Paris	Q'ly		----		Assembly No.		Ref. No.	N<tme of Paris	Q'ly	Paris No.	Assembly No.
				Paris No.
I	Arm Bed	I					24		Screw 4.37	2	151602-0-02
2	Arm Top Cover	I		112560 0 03			25		Bed Leg (for Thread Trimmer)	2	148611-0-01
3	Screw 437-40 x 16	I		062681·6·12			26		Cover (for Thread Trimmer)	I	148614.0.0 I
4	Screw 437-40 x 10	I		062681-0-12			27		Screw 3.18 (for Thread Trimmer)	2	149288-0.02
5	Thread Take-up Cover	I		112561-0-03			28		Tube Holder (L)(for Thread Trimmer)	2	142268·0·0 I
6	Screw 4.76	I		I07231-0-02			29		Screw 357-40 x 6 (for Thread Trimmer)	2	062670·6·12
7	F<tce Pl<tle	I		151101·0·02			30		Cord Holder (LL)(for -400A. -700A)	I	148818-0-0 I
8	Washer	I		146598-0.01			31		Screw 357-40 x 6	2	062670-6-12
13	Rear Cover	I		112566-0.03			32		Bed Leg (Small)	I	149179-0-01
				----					Screw 3.57	I	-----
14	Screw 357-40 x 6	2		062670 6-12			33				153112.0.01
15	Name Plale	I					34		Screw 3.57	I	129984.0.02
16	Pin	2					35		Name Plate	I	~
17	Model Plale	I		----			37		Paris Book Number Plale	I
18	Pin	2

From the library of: Superior-SewingI - Machine & Supply LLC

B. Threading mechanism (I) Fadenflihrungsvorrichtung (I) Mecanisme de Jenfilage (I) Mecanismo de Ia enhebrado (I)

B. Threading mechanism (2)(Standard) Fadenflihrungsvorrichtung (2) (Norm) Mecanisme de Jenfilage (2)(Standard) Mecanismo de Ia enhebrado (2)(Norma)

v-7

~8

Ref. No.	Name of Parts			Q'ty		Parts No.		Assembly No.
I	Top Cover Therad Guide			2	140527-0-01
2	Nut 5.95			2	150553-0-03
6	Screw 3.57			I		I00064-0-02
7	Stopper			I	112709-0-01
8	Screw 357-40 x 6			I		062670-6-12
12	Arm Thread Guide (Upper)			I	108266-0-01
13	Screw 3.57			I		I08960-0-02
14	Arm Thread Guide (Center)			I	112658-0-01
15	Screw 3.57			I		I08960-0-02

	Ref. No.	Name of Parts	Q'ty	Parts No.		Assembly No.
	9-1	Tension Release Bar	I	144823-0-01
	10-1	Pipe	I	I 12714-0-00
	II	Screw 437-40 x 10	I	062681-0-12
	16	Arm Thread Guide (Lower)	I	112715-0-01
	17	Screw 3.57	I	I08960-0-02
	18	Felt	I	114941-0-01
	19-1- 3	Thread Take-up Spring	I	144681-----0 0 I
	19·1· I	Upper Thread Tension Plate	I
	19-1- 2	Tension Stud	I	144680 0 0 I
	19-1- 4	Spring Guide Assembly	2	I08254-0-0 I
	19-1- 5	Screw 2.38	I	144682-0-01
	19-1- 6	Tension Stud	2	112706-0-01
	19-1- 7	Tension Disc	4	I08263-0-0 I
	19-1- 8	Tension Disc Washer	2	I08264-0-0 I
	19-1- 9	Tension Spring (for-1,-3)	2	118317-0-01
		Tension Spring (for-5)	2	148924-1-01		B-19-1
	19-1-10	Tension Control Nut	3	I08265-0-0 I		Upper Tension
						Control Assembly
	19-1-13	Stud Screw 3.57	2	112712-----0 01
						(for-5)
	19-t-11	Pin	2			(for-t,-3)
	19-1-12	Tension Release Plate	I	144683 0 01	144678-0-01
					148011-1-01
	19-1-14	Pin	I	144703-0-01
	19-1-15	Pin	I	144704-0-0 I
	19-1-16	Tension Release Spring	2	118320-0-01
	19-1-17	Cap	2	144685-0-01
	19-1-18	Disc	2	144686-0-01
	19-1-19	Thread Guide Bracket	2	144687-0-01
	19-1-20	Thread Guide Spring	2	144688-0-0I
	19-t-21	Stud Screw	2	144689-0-0 I
	19-1-22	Nut 3.57	2	021670-1-02
	19-1-23	Pin	2	-----

From the library of: Superior- 2Sewing- Machine & Supply LLC

D. Needle bar rocking mechanism I Nadelstangenbetatigung . Mecanisme de balancement de Ia barre a aiguille I Mecanismo de oscilaci6n de Ia barra de aguja

4

3

	~			~											~~				9		8
																					I
	~				1-a	1-1			1-9						1-10 1-4 1-5				10							11
						23	24
					r®~										~2128
					26~25
		16
Ref. No.			Name of Parts				Q'ty			Parts No.					Assembly No.	Ref. No.			Name of Parts			Q'ty			Parts No.			Assembly No.
1- I	Needle Bar Rock Shaft						I											10	Slide Plate (Left) 31.8-38.1 mm				I		145721-0-01
1- 2	Needle Bar Support						I			I 12589 1 00									Slide Plate (Left) 50.8-55.0mm				I		150836-0-0 I
- 3	Taper Pin						I			I07030 0 0 I								II	Slide Plate (Right)				I		112607-0-01
										----					D-1
4	Needle Bar Guide				Plate		2			112590-0-01								14	Slide Plate From Assembly (for Standard)				I		I 12610-0-0 I
5	Screw 2.38						4			I027 31-0-04					Needle Bar				Slide Plare Fronr A>seml>ly (for Thread Trimmer)				I		148599-0-0 I
															Crank Rod
6	Needle Bar						I		159360-0-01									15	Screw 5.16				I		116010-0-01
															Assembly
7	Needle Bar Clamp						I		112592-0-01						159359-0-01				Needle DP x 5 #II		(for-I)	2			107415-0-11
8	Screw 357-40 x 8						I		062670-8-12									16	Needle DP x 5 #14 (for-3)			2			107415-0-14
9	Needle Bar Clank				Rod		I		112593-0-01										Needle DP x 5 #21		(for-5)	2			107415-0-21
10	Needle· Bar Guide Slide Block						I		112721-0-01										Needle DP x 5 #22 (for-5)			2			I07415-0-22
2	Needle Bar Rock Shaft Bushing (left)						I			I 12594-0-0 I								17	Screw 3.57				I		112751-0-03
3	Needle Bar Connecting Rod						I			112595-0-00								18	Needle Bar Rock Shafl Bushing (Right)				I		112764-0-01
4	Screw 6.35						I			I05351-0-02								19	Pin				I		113386-0-00
5	Needle Bar Rock				Link		I		112596-0-01									23	Finger Guard Supponer (for SL'Indard.Option)				I		151191-0-01
6	Needle Bar Rock Link Stud						2		112597-0-01									24	Screw 3.57 (for Standard-Option)				I		144458-0-01
1	Nut 7.94						2			I01268-0-02								25	Finger Guard (for Srandard-Option)				I		150917-0-01
8	Needle Bar Connecting Crank						I		112598-0-01									26	Screw (for Standard-Option)			2			149177-0-01
9	Screw 6.35 x 18						I		009781-8-12									21	Finger Guard (for Thread Trimmer-Option)				I		155522-0-01
10	Slide Plate (Left) 0.5-25.4 mm						I			112606-0-0 I								28	Washer 4.76 (for Thread Trimmer-Option)				I		153484-0-01

From the library of: Superior- 4Sewing- Machine & Supply LLC

E. Presser foot mechanism (I)

StoffdrUckerfuB (I)

Mecanisme du pied presseur ( I)

Mecanismo del prensa telas (I)

	i01 j'		Ref. No.			Name of Parts		Q'ty		Parts No.		Assembly No.
			I			Presser Bar				112614-0-01
			2			Presser Bar Bushing (Upper)				112615-0-01
			3		Screw 5.95					013760-6-10
			4		Presser Bar Bracket					112616-0-01
1--			5		Screw 357-40 x 8					062670-8-12
			6			Presser Bar Lifter				148483-0-0 I
			7			Presser Foot Lifter				112618-0-01
			8		Screw					112619-0-01
			12		Stud Screw 6.35					I 12623-0-0 I
			13		Presser Adjusting Screw					I 12624-0-0 I
			15		Stud Screw 6.35					I 12626-0-0 I
			19		Stopper Screw					112630-0-0 I
			20		Screw					112631-0-01
			27		Screw 5.95					151605-0-01
			28		Presser Plate Spring					118170-1-01

E. Presser foot mechanism (2)(Standard·-400A)

StoffdrUckerfuB (2)(Norm·-400A)

Mecanisme du pied presseur (2)(Standard·-400A)

Mecanismo del prensa telas (2)(Norma·-400A)

t4-1

	--------1
	I
	I
	I
	I
	I
	I
	I
9-1-1	I
	I
9-1-1
	I
	I
	-----------29 :
	23
	--30
	24
		25 -·
		·25-1
	25-l	25-t
	1
	l------	'

Ref. No.		Name of Parts					Q'ty		Parts No.	Assembly No.
9-1-1		Presser Bar Guide					I	~		E-9-1
										Guide A .......:mbly
										Pr.,,..c:r Uur
										(lor Standard •
9-1-2		Screw 437-40 x 7						062680-7-12		I K09SO-O-OI
										(for 400A)
										14KK.'S-O-OI
14-1		Knee Lifter Connec1ing Le\er (for Slandard)						112625-0-01
		Knee Lifter Connecting Lever (for-400A)							148486-0-0I
16		Knee Lifter Lever						155505-0-01
17		Stud Screw 6.35							112628-0-0I
18-1		Spring							I 12629-0-0I
21		Knee Lifler	Connecting Rod					155447-1-01
22		Pin						114909-0-00
23		Set Collar						159436-0-01
24		Screw 4.37							I04908-0-04
25-1		Roller Bracket							112636------0 0 I	156824-0-0I
25-3		Roller
										E-25
25-2		Screw 4.37						151601 0 02		Knee Lifter
										Roller Assembly
25-4		Spring Pin AW5						047501-2-42
26		Presser Bar Bushing (lower)( for Standard)						112763-0-01
29		Knee Lifter Assembly (for Standard)						113380-0-01
		Knee Lifter Assembly (for-400A)						148674-0-01
30		Screw 6.2 x 32				3			I06030-0-0 I
53		Collar (for-400A)					I	148605-0-01

From the library of: Superior -Sewing5 - Machine & Supply LLC

E. Presser foot mechanism (3)(-700A) StoffdrlickerfuB (3)(-700A)

Mecanisme du pied Presseur (3)(-700A) Mecanismo del prensa telas (3)(-700A)

l

F. Feed mechanism (I) Transportvorrichtung (I) Mecanisme de lentrainement (I) Mecanismo de Ia alimentaci6n (I)

														Q'ty					Parts No.		Assembly No.
	Ref. No.							Name of Parts
9-2-1				Presser Bar Guide											I						E-9-2
																					Presser Hur
				Screw 437-40 x 7											I			062680 7 12			Guide Assembly
9-2-2																					148835-o-ol
																			148486----0 01
14-2				Knee Lifter Connecting Lever											I
18-2				Spring											I			149768-0-01
31				Presser Fool Lifter Cylinder (for-700A)											I			159621-0-01
33				Cylinder Supporter											I				159605-0-0I
34				Washer 4.76											2			025710-2-32
35				Screw 476-32 x 16										2				062711-6-12
36				Screw										2				140620-0-01
37					Pin										I			146153-0-01
38					Stop Ring E4										I			048040-3-42
39					Presser Foot					Lifter Lever					I			149024-0-01
40				Stud Screw 6.35											I			141439-0-01
41					Pin										I			118713-0-01
42					Screw 4.76										I			013710-7-12
43					Slide Block Assembly										I			149025-0-01
44					Screw										I			141494-0-01
45					Lever Assembly										I			149027-0-01
	46				Screw 6.35										I				149991-0-0I
	47				Cylinder Base										I			159606-0-01
	48				Screw 635-28 x 25									3				062782-5-12
	49				Cylinder Cover										I			159607-0-01
	50				Screw 476-32 x 8									2				06271 0-8-12
	51				Screw 5 x 6										I			007500-6-02
	52				Air Tube										I				159608-0-0 I
	53				Collar										I				148605-0-0 I

f

16

Ref. No.			Name of Parts		Q'ty			Parts No.		Assembly No.			Ref. No.	Name of Parts			Q'ty			Parts No.		Assembly No.
1-1		Feed Regulator Shaft				I		----		148771-0-01				Stop Ring E7
													13				I	048070-3-42
										F-1
1-2		Slide Block Guide Plate			2			143594 0 01		Feed Regulator			14	Screw 5.95			I	013761-4-10
1-3		Screw 437-40 x 10			4			062681-0-12		Shaft Assembly			16	Screw 4.37			2		151602-0-0 I
1-4		Slide Block Assembly				I		145328-0-01					17	Feed Regulator Connecting Link			I	148487-0-01
2		Stop Ring				I		143597 0-01					18	Feed Regulator Arm (for-1,-3)			I	148499-0-01
3-1		Collar				I				F-3				Feed Regulator Arm (for-5)			I	148500-0-01
										Collar Assembly
3-2		Screw 6.35			2			101706 0 01		180321-0-01			19	Screw 5.95			I	118853-0-01
								----
4		Length Control Screw				I		159361 0 01					23	Screw 5.95			I	118853-0-01
5		Length Control Dial				I		153168-0-01					29	Spring			I		143609-0-0 I
6		Length Control Plate (for-1,-3)				I		151508-0-0 I					30	Spring Hook Plate			I	143610-0-01
		Length Control Plate (for-5)				I		151507-0-01					31	Screw 476-32 x 8			I	062710-8-12
7		Screw 4.76				I		142747-0-02					36	Stud			I	143616-0-01
8		Washer				I		142746-0-02					37	Stop Ring E6			2	048060-3-42
9		Pin				I		145502-0-01					38	Lever Feed Arm			I	148495-0-01
10		Notch Spring				I		I00328-0-0 I					39	Screw 6.35 x 18			I	009781-8-12
12		Feed Regulator Stud				I		148488-0-0I

From the library of: Superior- 6Sewing- Machine & Supply LLC