Brother HL-L2320D, HL-L2300D Setup Guide

HL L2300D / HL L2320D / HL L2321D

Quick Setup Guide

Unpack the machine and check the components

A

Drum Unit	AC Power Cord	Quick Setup Guide
(Pre installed)	(only for certain models)
B
Inbox/Starter Toner	CD ROM	Product Safety Guide
Cartridge

Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Watch our FAQ Videos for help with setting up your	ENG
Brother machine: solutions.brother.com/videos.	Version 0

Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.

Manuals in Spanish for this model are available on the enclosed CD-ROM. (USA only) Manuales en Español para este modelo están disponibles en el CD-ROM incluido. (sólo en Estados Unidos)

NOTE:

•The components included in the box and the AC power plug may differ depending on your country.

•You must purchase the correct interface cable for the interface you want to use.

USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 meters (6 feet).

1	Remove the packing materials and install the toner cartridge
			B	A	B
		A	B		A
	Remove the orange part.		Remove the orange part.
2	Load paper in the paper tray
		Adjust the paper guides.

3 Connectmachine the power cord and turn on the

Printer LED Indications				Blinking:	ON: or	OFF:
Toner	Replace	Drum End	Replace	Drum ! 2	Paper Jam /	No Paper
Low 1	Toner	Soon 1	Drum
				Cover is Open 2
Toner

Drum

Paper

Ready

1The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.

2The LED will blink ON and OFF at 0.5 second intervals.

	Back	Front
4A	Configuration using the CD-ROM (Windows®)

Follow the on-screen instructions until the

Connect the machine screen appears.

NOTE:

If the Brother screen does not appear automatically, go to Computer (My Computer).

(For Windows® 8: click the (File Explorer) icon on the taskbar, and then go to Computer.)

Double-click the CD-ROM icon, and then double-click start.exe.

		Follow the on-screen instructions				NOTE:
				Finish
4B		to continue installation.				If connection is unsuccessful, repeat this step.
		Configuration without using the CD-ROM (Windows® without CD-ROM drive or Macintosh)

Download the full driver and software package from the Brother Solutions Center. (For Windows®) solutions.brother.com/windows

(For Macintosh) solutions.brother.com/mac