TYPESET V1
the Control Grip
Instruction Booklet
BSB510
TYPESET V1
CONGRATULATIONS
on the purchase of your new Breville Control Grip
Contents
4 Breville recommends safety first
6Know your Breville Control Grip
8Operating your Breville Control Grip
14Care, cleaning & storage for your Breville Control Grip
16Food preparation guide for your Breville Control Grip
18 Recipes
3
Breville recommends safety first
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
Important safeguards
Read all instructions BEFORE USE AND SAVE FOR FUTURE REFERENCE
•Remove any packaging material and promotional stickers before using the stick mixer for the first time.
•Do not place the stick mixer near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water, flour, etc.
•Do not place the stick mixer on or near a hot gas or electric burner, or where it could touch a heated oven.
•If using the stick mixer to blend hot food in a saucepan over heat, remove the saucepan from the heat source and ensure the power cord and body of appliance are also kept away from any heat source.
•Handle the stick mixer and attachments with care – remember the blade is very sharp and should be kept out of reach of children.
•Always make sure the stick mixer is completely and properly assembled before operating.
•Ensure the Stick mixer is turned off at the trigger switch, the power is switched off at the power outlet and the cord is unplugged from the power outlet before attempting to attach any of the accessories.
•Always ensure the Blending Leg is securely fitted onto the blender motor body before operating.
•Do not use attachments other than those provided with the Stick mixer.
•Please only use the whisk attachment for the recipes contained in this instruction booklet.
•Do not use the whisk attachment for anything other than its intended use.
•Do not attempt to operate the stick mixer by any method other than those described in this booklet.
•Do not process hot or boiling liquids in the chopping bowl – allow liquids to cool before placing into the chopper bowl.
•Do not operate the appliance continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use.
•Never mix dry, thick or heavy mixtures for more than 30 seconds. Stop the operation and stir the ingredients before continuing. Allow the motor to rest for 1 minute between each use.
•When using heavy loads, the appliance should not be operated for more than 30 seconds.
•Recipes in this instruction booklet are not considered heavy loads.
•Always ensure the Stick mixer is turned off, the power is switched off at the power outlet and the cord is unplugged from the power outlet before attempting to move the appliance, when not in
use, if left unattended and before disassembling, cleaning or storing.
•If food becomes lodged around the processing blade or in the blade guard, release the ON button, switch the power off at the power outlet and unplug the cord. Use a spatula to
4
Breville recommends safety first
dislodge the food. Do not use fingers as the blades are sharp.
•To protect against electric shock do not immerse the motor body, cord or power plug in water or any other liquid.
•Do not remove the stick mixer from ingredients during operation. Ensure the appliance is switched off and has stopped turning before removing, to avoid contact with moving blade or whisk.
•Do not leave the stick mixer unattended when in use.
•Keep the appliance clean. Follow
the cleaning instructions provided in this book.
•Do not use the stick mixer/stick blender with wet hands.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
•Unwind the cord fully before use.
•Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted.
•This appliance is not intended for use by young children or infirm persons without supervision.
•Young children should be supervised to ensure that they do not play with the appliance.
•It is recommended to regularly inspect the appliance. Do not use the appliance if power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville service centre for examination and/or repair.
•Any maintenance, other than cleaning, should be performed at an authorised Breville Service Centre.
•This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.
•The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It
is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
SAVE THESE INSTRUCTIONS
5
TYPESET V1
KNOW
your Breville Control Grip
KNOW your Breville Control Grip
B
H
C
F
A
J
G
D
K
I
E
A. |
Motor Body |
G. |
Chopping blade |
B. |
Speed Control Dial |
H. |
Chopper bowl lid |
C. |
Easy Grip Trigger Switch |
I. |
Blending Jug |
D. |
Detachable blending leg |
J. |
Whisk |
E. |
Stainless steel blending blade |
K. |
Dual-purpose storage lid and |
F. |
Chopping bowl |
|
anti-slip mat |
|
|
7
TYPESET V1
ASSEMBLY & OPERATION
of your Breville Control Grip
ASSEMBLY & OPERATION
Before first use
Remove any packaging material and promotional labels. Remove the blending leg from the mixer motor body and wash it in warm soapy water (refer to assembly instructions in this booklet). Rinse and dry
thoroughly. Ensure no water remains inside the blending leg to avoid water running into the motor body when reattached.
Disassemble and wash the chopping blade, chopper bowl, chopper bowl lid, whisk, storage lid, and blending jug in warm soapy water, rinse and dry thoroughly. Ensure no water remains on the chopper bowl lid or whisk attachment to avoid water running into the motor body when reattached.
NOTE
The detachable blending leg, chopping bowl, chopping blade, blending jug, whisk and dual purpose storage lid/ anti-slip mat can also be washed in the dishwasher. The chopper bowl lid, whisk gearbox and motor body are not dishwasher safe – see the care and cleaning section of this booklet for cleaning instructions of these parts.
This stick mixer is a versatile appliance that can be attached to:
•The stainless steel blending leg– for use as a stick mixer
•The chopper bowl with chopping blade and lid – for use as a mini chopper
•The whisk attachment – for use as a hand whisk
To attach the blending leg
Hold the blending leg with the blades down, and align the top end of the blending leg with the corresponding end of the motor body and push until the blending leg ‘clicks’ and locks onto the motor body.
Always ensure blending leg is dry, and no water left inside, before reattaching.
Using as a stick mixer
Ensure the blending leg is assembled to the motor body as detailed above.
1.Place food to be processed into the blending jug provided (or a sufficiently large mixing bowl or saucepan). The jug provided should be only be ½ full or less when blending liquids or when making a puree of fruit and/or vegetables.
2.Insert the plug into a 230/240V power outlet and turn the power on.
3.By turning the dial at the top of motor body, select a speed between 1 and 15. Low Speed : 1
High Speed : 15
NOTE
If selecting a high speed, it is recommended that you start with a slow speed and gradually increase to the higher speed to avoid splattering and over-processing.
4.Place the blending leg as deeply as possible into the jug and press the trigger switch to turn the stick mixer on. The button must be held for the required duration of operation.
9
ASSEMBLY & OPERATION
5.Work through the ingredients in the jug with a gentle raising and lowering motion.
6.Switch off the motor by releasing the trigger switch
7.Ensure the motor has completely stopped before lifting the blender out of the jug.
8.When processing has finished, switch off at the power outlet and remove the power plug.
To detach the blending leg
Ensure the trigger switch is released, the power is turned off at power point and the appliance is unplugged.
Hold the motor body with one hand, and using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the blending leg to detach.
Recommendations when using as a stick mixer
•The stick mixer blends foods and liquids rapidly, therefore it is easy to overprocess. Remember when using the blending leg to stop the stick mixer and check food throughout the operation.
•Allow food to cool before blending.
•The stainless steel blending leg allows for hot food to be processed directly in the saucepan. This makes blending soups and sauces very easy.
•For safety reasons remove saucepan away from the heat before processing.
•Ensure the body of the appliance and power cord are kept away from any heat source.
•When pureeing and blending, cut food into uniform sizes. This will ensure smooth and consistent results.
•Warm all liquids to be added to soups and purees, this will ensure even blending.
•Place the blending jug on the anti-slip mat during blending. This will keep the jug stable.
•Do not operate the appliance continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use.
If food becomes lodged around the processing blade or in the blade guard, follow the following safety instructions:
1.Release the Trigger switch the power off at the power outlet and unplug the cord.
2.Use a spatula to carefully dislodge the food. Do not use fingers as the blades are sharp.
3.After the food has been removed and blades are clear, plug the appliance back into the power supply, switch the power on and continue blending.
10
Loading...