Bosch D7412GV4, D9412GV4, D7212GV4 User Manual

Control Panel

D9412GV4/D7412GV4/D7212GV4 v1.xx

en

Release Notes

Control Panel Table of contents | en 3

Table of contents

1

1.1 About documentation 4

1.1.1 Bosch Security Systems, Inc. product manufacturing dates 4

2

2.1 What's new 5

2.1.1 cUL Compliance 5

2.2 Corrections 5

2.2.1 Master Arm – No Exit 5

2.2.2 3-digit point number reports 5

2.3 Known Issues 5

2.3.1 Point/User Flag 5

2.3.2 Program Entry Guide Update 5

2.3.3 Sensor Reset Command (COMMAND 47) 6

2.3.4 ANSI SIA CP-01 6

2.3.5 ITS-DX4020-G 6

2.3.6 Single RPS Connection 6

2.3.7 Area Assigned 6

2.3.8 COMMAND 7 and COMMAND 9 7

3

3.1 Remote firmware update 8

3.2 Protocol 8

3.3 User authentication 8

3.4 Passcode Enter functions 8

3.5 Number of users 9

3.6 SDI2 support 9

3.7 B208 Octo-input module 9

3.8 B308 Octo-output module 9

3.9 B520 AUX power supply module 9

3.10 B420 network interface module 9

3.11 B820 Inovonics interface module 9

3.12 Keypad programming 9

3.13 Event log 10

4

Introduction 4

Version 1.10 5

Version 1.00 firmware revision history 8

Upgrading to a GV4 Series Control Panel 11

Bosch Security Systems, Inc. Release Notes 2017.03 | 02 | F.01U.267.366

4 en | Introduction Control Panel

1 Introduction

These Release Notes are for control panel firmware version v1.10.

1.1 About documentation

Supporting literature for v1.xx firmware.

Title Part Number

D9412GV4/D7412GV4/D7212GV4 Program Entry Guide F01U218312

D9412GV4/D7412GV4/D7212GV4 Program Record Sheet F01U214958

D9412GV4/D7412GV4/D7212GV4 Operation and Installation Guide F01U266054

D9412GV4/D7412GV4/D7212GV4 Approved Applications Compliance Guide F01U266055

D9412GV4/D7412GV4/D7212GV4 UL Installation Guide F01U266058

Copyright

This document is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright. All rights reserved.

Trademarks

All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.

1.1.1 Bosch Security Systems, Inc. product manufacturing dates

Use the serial number located on the product label and refer to the Bosch Security Systems,
Inc. website at http://www.boschsecurity.com/datecodes/.
The following image shows an example of a product label and highlights where to find the
manufacturing date within the serial number.

2017.03 | 02 | F.01U.267.366 Release Notes Bosch Security Systems, Inc.