Block PVSE400/30-25 Catalog Page

Three-phase, primary switched mode power supply, Economy

PVSE 400/30-25

Advantages

Stabilised and adjustable output voltage

Up to 200 % Real Power Boost for 4 seconds

Top Boost to trip conventional circuit breakers

DC OK signalling

Parallel connection option

Service-friendly spring-loaded connector system

Can be supplied with active inrush current limiting option

Can be supplied with isolated DC OK signalling function

Panel installation on mounting rails

Applications

Primary switched mode power supply with massive power reserves focussing
on the key task of power supply.

Sample application

Picture shows PVSE 400/24-10

Approvals W o Z

UL/CSA 60950 recognised, UL508 listed

Three-phase, primary switched mode power supply, Economy

205.5

128.0

127.0

76.0

12.5

+

-

30

PVSE 400/30-25

Type PVSE 400/30-25

Input

Input rated voltage
Input voltage range
Input rated current (rated load)
Rated frequency range
Starting current limiter
Input fuse internal
Recommended back-up fuse (circuit breaker)
Harmonic correction

Mains buffering (rated load)

Transient surge voltage protection

Output

Output rated voltage
Output voltage range
Resistance to reverse feed max.
Output rated current
Parallel connection
Power Boost
Overload behaviour
max. Power loss idling/nominal load
Serial operation
Efficiency
Ripple factor
Top Boost

Signaling

Power Good (DC OK)
Potential free signal contact
Stand-by-input

Approvals

Approvals

Environment

Ambient temperature
Storage temperature
Derating

Safety and protection

Protection index
Safety class

Accessory

Connector for signalling
Side DIN rail mounting
Direct screw fastening plate for lateral mounting

Order numbers

Order Number

3 x 400 - 500 Vac
340 - 550 Vac (480 - 780 Vdc)

1.6 A (3 x 340 Vac)
44 Hz - 66 Hz / 0 Hz
<30 A, NTC
3 x 6.3 A (slow-blow)
10 A, 16 A, characteristics B, C
passive

15.6 / 42.9 ms
(400 / 500 Vac)

Varistor

30 Vdc
27 - 43 Vdc
63 Vdc

25.00 A
Yes
45 A / 4 s (35 A / 8 s)
Constant current

5.2 / 47.3 W
Yes
typ. 94.1 %
typ. 70 mVss
85 A / 50 ms

LED green, LED red
Yes
Yes

cURus, cULus

-25° C to +70° C

-25 °C to +85 °C

-3 %/K > +50 °C

IP 20
I, with PE connection

PV-CON (optional)
PV-TS35M (optional)
PV-WB2 (optional)

PVSE 400/30-25

Type PVSE 400/30-25

Terminal and mounting

Terminals input, (spring clamp terminal, pluggable)
Terminals output, (spring clamp terminal, pluggable)
Terminals signalling, (spring clamp terminal,

pluggable)
Mounting position
Fixing method

Measures and weights

Weight

max. 2.5 mm²
max. 10 mm²

max. 0.5 mm²

vertical
DIN Rail system TS35

3.03 kg

Subject to change.