Block PVSE 230 Catalog Page

1.1

1.2

5.1

1.3

2.1

2.2

3.1

3.2

3.3

5.2

4.0

Power supplies

Single-phase switched mode power supplies

2

Single-phase, primary switched mode
power supply, Economy

PVSE 230

General Data

Input rated voltage 100 - 240 Vac

Output rated voltage 12 - 48 Vdc

Output rated current 3 - 20 A

Ambient temperature -25 °C to +70 °C

Efficiency up to 92 %

Advantages

Stabilised and adjustable output voltage

Up to 200 % Real Power Boost for 4 seconds

Top Boost to trip conventional circuit breakers

DC OK signalling

Stand-by-input

Parallel connection option

Service-friendly spring-loaded connector system

Optional with active inrush current limiter

StandardsZ

Applications

Primary switched mode power supply with massive power reserves focussing
on the key task of power supply.

Sample application

Approvals W o J Z

Primary switched mode power supply
to UL 60950, UL 508

Safety:
EN 61558-2-16, EN 60950-1

EMC:
EN 61204-3

UL/CSA 60950 recognised (E213214), UL508 listed (E219022)

Subject to change

321

+

-

Single-phase, primary switched mode
power supply, Economy

PVSE 230

Typ PVSE 230/24-3B PVSE 230/24-5 PVSE 230/24-5B PVSE 230/24-10

Input

Input rated voltage 100 - 240 Vac 100 - 240 Vac 100 - 240 Vac 110 - 240 Vac

Input rated current (rated load) 0.86 / 0.51 A (110 / 230 Vac) 1.7 / 0.97 Aac (110 / 230 Vac) 1.7 /0.97 Aac (110 / 230 Vac) 2.5 / 1.2 Aac (110 / 230 Vac)

Input voltage range 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc)

Rated frequency range 44 Hz - 66 Hz / 0 Hz 44 Hz - 66 Hz / 0 Hz 44 Hz - 66 Hz / 0 Hz 44 Hz - 66 Hz / 0 Hz

Starting current limiter <5 A, active <30 A, NTC <8 A, active <8 A, active

Input fuse internal 2 A (slow-blow) 4 A (slow-blow) 4 A (slow-blow) 6,3 A (slow-blow)

Recommended back-up fuse (circuit breaker) 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C 10 A, 16 A, characteristics B, C

Harmonic correction

- - - active

Mains buffering (rated load) 10 / 70 ms (110 / 230 Vac) 12 / 35 ms (110 / 230 Vac) 12 / 35 ms (110 / 230 Vac) 24 / 24 ms (110 / 230 Vac)

Transient surge voltage protection Varistor Varistor Varistor Varistor

Output

Output rated voltage 24 Vdc 24 Vdc 24 Vdc 24 Vdc

Output voltage range 22 - 29.5 Vdc 22 - 29.5 Vdc 22 - 29.5 Vdc 22 - 29.5 Vdc

Resistance to reverse feed max. 35 Vdc 35 Vdc 35 Vdc 35 Vdc

Output rated current 3.00 A 5.00 A 5.00 A 10.00 A

Parallel connection Yes Yes Yes Yes

Power Boost

6.5 A / 4 s (5.8 A / 8 s) 10 A / 4 s (7.5 A / 8 s) 10 A / 4 s (7.5 A / 8 s) 20 A / 4 s (15 A / 8 s)

Overload behaviour

Constant current Constant current Constant current Constant current

max. Power loss idling/nominal load 3.0 / 8.8 W 5.0 / 14.6 W 5.0 / 14.6 W 3.5 / 19.7 W

Serial operation Yes Yes Yes Yes

Efficiency typ. 87.7 % typ. 87.8 % typ. 87.8 % typ. 91.8 %

Ripple factor typ. 70 mVss typ. 70 mVss typ. 70 mVss typ. 70 mVss

Top Boost 14 A / 25 ms 21 A / 25 ms 21 A / 25 ms 60 A / 25 ms

Signaling

Stand-by-input Yes Yes Yes Yes

Power Good (DC OK)

LED green, LED red LED green, LED red LED green, LED red LED green, LED red

Potential free signal contact Yes Yes Yes Yes

Approvals

Approvals cURus, cULus cURus, cULus cURus, cULus cURus, cULus

Environment

Storage temperature -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C

Derating -3 %/K > +50 °C,

-5 %/Vac < 95 Vac

-3 %/K > +50 °C,

-5 %/Vac < 95 Vac

-3 %/K > +50 °C,

-5 %/Vac < 95 Vac

-3 %/K > +50 °C,

-1.5 %/Vac < 110 Vac

Ambient temperature -10 °C to +70 °C -10 °C to +70 °C -10 °C to +70 °C -10 °C to +70 °C

Safety and protection

Safety class

I, with PE connection I, with PE connection I, with PE connection I, with PE connection

Protection index

IP 20 IP 20 IP 20 IP 20

Accessory

Connector for signalling PV-CON (optional) PV-CON (optional) PV-CON (optional) PV-CON (optional)

Side DIN rail mounting PV-TS35M (optional) PV-TS35M (optional) PV-TS35M (optional) PV-TS35M (optional)

Direct screw fastening plate
for lateral mounting

PV-WB2 (optional) PV-WB2 (optional) PV-WB2 (optional) PV-WB2 (optional)

Order numbers

Order Number PVSE 230/24-3B PVSE 230/24-5 PVSE 230/24-5B PVSE 230/24-10

+

-

Power supplies

Single-phase switched mode power supplies

2

Single-phase, primary switched mode
power supply, Economy

PVSE 230

Typ PVSE 230/12-6 PVSE 230/12-10 PVSE 230/12-15 PVSE 230/24-3

Input

Input rated voltage 100 - 240 Vac 100 - 240 Vac 100 - 240 Vac 100 - 240 Vac

Input rated current (rated load) 0.86 / 0.51 Aac (110 / 230 Vac) 1.7 / 0.97 Aac (110 / 230 Vac) 1.9 / 0.9 Aac (110 / 230 Vac) 0.86 / 0.51 Aac (110 / 230 Vac)

Input voltage range 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc)

Rated frequency range 44 Hz - 66 Hz / 0 Hz 44 Hz - 66 Hz / 0 Hz 44 Hz - 66 Hz / 0 Hz 44 Hz - 66 Hz / 0 Hz

Starting current limiter <30 A, NTC <30 A, NTC <8 A, active <30 A, NTC

Input fuse internal 2 A (slow-blow) 4 A (slow-blow) 6.3 A (slow-blow) 2 A (slow-blow)

Recommended back-up fuse (circuit breaker) 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C

Harmonic correction

Mains buffering (rated load) 10 / 70 ms (110 / 230 Vac) 12 / 35 ms (110 / 230 Vac) 30 / 30 ms (110 / 230 Vac) 10 / 70 ms (110 / 230 Vac)

Transient surge voltage protection Varistor Varistor Varistor Varistor

Output

Output rated voltage 12 Vdc 12 Vdc 12 Vdc 24 Vdc

Output voltage range 11 - 18 Vdc 11 - 18 Vdc 11 - 18 Vdc 22 - 29.5 Vdc

Resistance to reverse feed max. 25 Vdc 25 Vdc 25 Vdc 35 Vdc

Output rated current 6.00 A 10.00 A 15.00 A 3.00 A

Parallel connection Yes Yes Yes Yes

Power Boost

Overload behaviour

max. Power loss idling/nominal load 3.0 / 8.8 W 5.0 / 14.6 W 4.6 / 23.4 W 3.0 / 8.8 W

Serial operation Yes Yes Yes Yes

Efficiency typ. 83 % typ. 87.8 % typ. 87 % typ. 87.7 %

Ripple factor typ. 70 mVss typ. 70 mVss typ. 70 mVss typ. 70 mVss

Top Boost 21 A / 25 ms 60 A / 25 ms 55 A / 25 ms 14 A / 25 ms

Signaling

Stand-by-input Yes Yes Yes Yes

Power Good (DC OK)

Potential free signal contact Yes Yes Yes Yes

Approvals

Approvals cURus, cULus cURus, cULus cURus, cULus cURus, cULus

Environment

Storage temperature -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C

Derating -3 %/K > +50 °C,

Ambient temperature -10 °C to +70 °C -10 °C to +70 °C -10 °C to +70 °C -10 °C to +70 °C

Safety and protection

Safety class

Protection index

Accessory

Connector for signalling PV-CON (optional) PV-CON (optional) PV-CON (optional) PV-CON (optional)

Side DIN rail mounting PV-TS35M (optional) PV-TS35M (optional) PV-TS35M (optional) PV-TS35M (optional)

Direct screw fastening plate
for lateral mounting

Order numbers

Order Number PVSE 230/12-6 PVSE 230/12-10 PVSE 230/12-15 PVSE 230/24-3

- - active -

12 A / 4 s (9 A / 8 s) 20 A / 4 s (15 A / 8 s) 30 A / 4 s (22.5 A / 8 s) 6.5 A / 4 s (5.8 A / 8 s)

Constant current Constant current Constant current Constant current

LED green, LED red LED green, LED red LED green, LED red LED green, LED red

-3 %/K > +50 °C,

-5 %/Vac < 95 Vac

I, with PE connection I, with PE connection I, with PE connection I, with PE connection

IP 20 IP 20 IP 20 IP 20

PV-WB2 (optional) PV-WB2 (optional) PV-WB2 (optional) PV-WB2 (optional)

-5 %/Vac < 95 Vac

-3 %/K > +50 °C,

-1.5 %/Vac < 110 Vac

-3 %/K > +50 °C,

-5 %/Vac < 95 Vac

Subject to change

322