Block PEL 230 Catalog Page
1.1
1.2
5.1
1.3
2.1
2.2
3.1
3.2
3.3
5.2
4.0
Power supplies
Single-phase switched mode power supplies
2
Single-phase, primary switched mode
power supply
PEL 230
General Data
Input voltage range 85 - 264 Vac
Output rated voltage 5 - 24 Vdc
Output rated current 1.3 - 6.5 A
Ambient temperature -25 °C to +55 °C
Efficiency up to 88 %
Protection index IP 20
Advantages
Stabilised and adjustable output voltage
DC OK signalling via LEDs
Parallel connection option
Service-friendly spring-loaded connector system
Panel installation on mounting rails
Applications
Primary switched mode power supply is concentrated on the core task of
voltage and current supply. Flat step profile optimised for installation in control
panels in the building automation.
StandardsZ
Primary switched mode power supply
to UL 60950, UL 508
Safety:
EN 61558-2-16, EN 60950-1
EMC:
EN 61204-3
Approvals W o J # Z
UL/CSA 60950 recognised (E213214), UL508 listed (E219022),
Germanischer Lloyd
Subject to change
303
+
-
Single-phase, primary switched mode
power supply
PEL 230
Typ PEL 230/18-1,1 PEL 230/18-2,5 PEL 230/24-1,3 PEL 230/24-2,5
Input
Input rated voltage 100 - 240 Vac 100 - 240 Vac 100 - 240 Vac 100 - 240 Vac
Input voltage range 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc)
Input rated current (rated load) 0.45 / 0.23 A (110 / 230 Vac) 0.72 / 0.42 A (110 / 230 Vac) 0.7 / 0.4 A (110 / 230 Vac) 1.4 / 0.6 A (110 / 230 Vac)
Rated frequency range 44 - 66 Hz / 0 Hz 44 - 66 Hz / 0 Hz 44 - 66 Hz / 0 Hz 44 - 66 Hz / 0 Hz
Starting current limiter <30 A, NTC <30 A, NTC <30 A, NTC <30 A, NTC
Input fuse internal 2 A (slow-blow) 4 A (slow-blow) 2 A (slow-blow) 2 A (slow-blow)
Recommended back-up fuse (circuit breaker) 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C
Mains buffering (rated load) 10 / 80 ms 25 / 120 ms 10 / 80 ms 10 / 80 ms
Transient surge voltage protection Varistor Varistor Varistor Varistor
Output
Output rated voltage 18 Vdc 18 Vdc 24 Vdc 24 Vdc
Output voltage range 15.5 - 19.0 Vdc 15 - 28 Vdc 22.8 - 26.4 Vdc 22.8 - 26.4 Vdc
Output rated current 1.10 A 2.50 A 1.30 A 2.50 A
Resistance to reverse feed max. 25 Vdc 35 Vdc 30 Vdc 30 Vdc
Overload behaviour
Constant current Constant current Constant current Constant current
Ripple factor typ. 100 mVss typ. 50 mVss typ. 100 mVss typ. 100 mVss
Parallel connection Yes Yes Yes Yes
Serial operation Yes Yes Yes Yes
Efficiency typ. 80 % typ. 83 % typ. 82 % typ. 88 %
Signaling
Power Good (DC OK)
LED green LED green LED green LED green
Approvals
Approvals cURus, cULus, GL cURus, cULus cURus, cULus, GL cURus, cULus, GL
Environment
Ambient temperature -25 °C to +55 °C -25 °C to +55 °C -25 °C to +55 °C -25 °C to +55 °C
Storage temperature -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C
Derating -3 %/K > +45 °C -3 %/K > +45 °C -3 %/K > +45 °C -3 %/K > +45 °C
Current capacity by any mounting position max. 0.8 A max. 1.6 A max. 0.9 A max. 1.6 A
Safety and protection
Protection index
IP 20 IP 20 IP 20 IP 20
Safety class
II, (in closed cabinet) II, (in closed cabinet) II, (in closed cabinet) II, (in closed cabinet)
Order numbers
Order Number PEL 230/18-1,1 PEL 230/18-2,5 PEL 230/24-1,3 PEL 230/24-2,5
+
-
Power supplies
Single-phase switched mode power supplies
2
Single-phase, primary switched mode
power supply
PEL 230
Typ PEL 230/5-5,5 PEL 230/12-2 PEL 230/12-4 PEL 230/12-6,5
Input
Input rated voltage 100 - 240 Vac 100 - 240 Vac 100 - 240 Vac 100 - 240 Vac
Input voltage range 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc) 85 - 264 Vac (120 - 373 Vdc)
Input rated current (rated load) 0.9 / 0.5 A (110 / 230 Vac) 0.7 / 0.4 A (110 / 230 Vac) 0.9 / 0.5 A (110 / 230 Vac) 1.5 / 0.5 A (110 / 230 Vac)
Rated frequency range 44 - 66 Hz / 0 Hz 44 - 66 Hz / 0 Hz 44 - 66 Hz / 0 Hz 44 - 66 Hz / 0 Hz
Starting current limiter <30 A, NTC <30 A, NTC <30 A, NTC <30 A, NTC
Input fuse internal 2 A (slow-blow) 2 A (slow-blow) 2 A (slow-blow) 4 A
Recommended back-up fuse (circuit breaker) 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C 6 A, 10 A, 16 A, characteristics B, C
Mains buffering (rated load) 10 / 80 ms 10 / 80 ms 10 / 80 ms 15 / 100 ms
Transient surge voltage protection Varistor Varistor Varistor Varistor
Output
Output rated voltage 5 Vdc 12 Vdc 12 Vdc 12 Vdc
Output voltage range 4.5 - 8.5 Vdc 10.5 - 15.5 Vdc 10.5 - 15.5 Vdc 10.5 - 15.5 Vdc
Output rated current 5.50 A 2.00 A 4.00 A 6.50 A
Resistance to reverse feed max. 10 Vdc 25 Vdc 25 Vdc 25 Vdc
Overload behaviour
Ripple factor typ. 100 mVss typ. 100 mVss typ. 100 mVss typ. 100 mVss
Parallel connection Yes Yes Yes Yes
Serial operation Yes Yes Yes Yes
Efficiency typ. 85 % typ. 80 % typ. 85 % typ. 87 %
Signaling
Power Good (DC OK)
Approvals
Approvals - cURus, cULus, GL cURus, cULus, GL cURus, cULus, GL
Environment
Ambient temperature -25 °C to +55 °C -25 °C to +55 °C -25 °C to +55 °C -25 °C to +55 °C
Storage temperature -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C -25 °C to +85 °C
Derating -3 %/K > +45 °C -3 %/K > +45 °C -3 %/K > +45 °C -3 %/K > +45 °C
Current capacity by any mounting position max. 3.5 A max. 1.4 A max. 2.4 A max. 3.9 A
Safety and protection
Protection index
Safety class
Order numbers
Order Number PEL 230/5-5,5 PEL 230/12-2 PEL 230/12-4 PEL 230/12-6,5
Constant current Constant current Constant current Constant current
LED green LED green LED green LED green
IP 20 IP 20 IP 20 IP 20
II, (in closed cabinet) II, (in closed cabinet) II, (in closed cabinet) II, (in closed cabinet)
Subject to change
304
Loading...