Bissell Crosswave 1785, Crosswave 2210, Crosswave 2211 User Manual

CROSSWAVE®

_______________

USER GUIDE

1785, 2210, 2211 SERIES

www.BISSELL.com

1

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR CROSSWAVE®.

When using an electrical appliance, basic precautions should be observed, including the following:

	WARNING		»» Use extra care when cleaning on stairs.
			»» Do not use to pick up flammable or combustible materials
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,			(lighter fluid, gasoline, kerosene, etc.) or use in areas where
			they may be present.
OR INJURY:
			»» Do not use appliance in an enclosed space filled with vapors
»» Connect to a properly grounded outlet only. See grounding
			given off by oil-based paint, paint thinner, some moth-
	instructions. Do not modify the 3-prong grounded plug.
			proofing substances, flammable dust, or other explosive or
»» Do not leave appliance when it is plugged in. Unplug from outlet
			toxic vapors.
	when not in use and before servicing.
			»» Do not use to pick up toxic material (chlorine bleach,
»» Use indoors only.
			ammonia, drain cleaner, etc.).
»» Do not allow to be used as a toy. Close attention is necessary
			»» Do not pick up anything that is burning or smoking, such as
	when used by or near children.
			cigarettes, matches, or hot ashes.
»» Do not use for any purpose other than described in
			»» Use only BISSELL® cleaning formulas intended for use with
	this user guide. Use only manufacturer’s recommended
			this appliance to prevent internal component damage. See
	attachments.
			the Cleaning Formulas section of this guide.
»» Do not use with damaged cord or plug. If appliance is not
			»» Do not immerse. Use only on surfaces moistened by the
	working as it should, or has been dropped, damaged, left
			cleaning process.
	outdoors, or dropped into water, have it repaired at an
			»» Keep appliance on a level surface.
	authorized service center.
			»» Do not carry the appliance while in use.
»» Do not pull or carry by cord, use cord as a handle, close a
			»» Do not use without filters in place.
	door on cord, or pull cord around sharp edges or corners. Do
	not run appliance over cord. Keep cord away from heated
	surfaces.
»» Do not unplug by pulling on cord. To unplug, grasp the plug,			WARNING
	not the cord.
»» Do not handle plug or appliance with wet hands.			Risk of injury. Brush may start unexpectedly.
»» Do not put any object into openings. Do not use with any			Unplug before cleaning or servicing.
	opening blocked; keep openings free of dust, lint, hair, and
	anything that may reduce air flow.		WARNING
»» Keep hair, loose clothing, fingers, and all parts of body away
	from openings and moving parts.		To reduce the risk of injury from moving
»» Turn OFF all controls before plugging or unplugging			parts – unplug before servicing.
	appliance.
	WARNING	GROUNDING INSTRUCTIONS
	Improper connection of the equipment-grounding conductor can	This appliance must be connected to a grounded wiring system. If it
	result in a risk of electrical shock. Check with a qualified electrician or	should malfunction or break down, grounding provides a safe path
	service person if you aren’t sure if the outlet is properly grounded.	of least resistance for electrical current, reducing the risk of electrical
	DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper	shock. The cord for this		Grounded
	outlet installed by a qualified electrician. This appliance is designed	appliance has an equipment-grounding
				Outlets
	for use on a nominal 120-volt circuit, and has a grounding attachment	conductor and a grounding plug. It must
	plug that looks like the plug in the illustration. Make certain that the	only be plugged into an outlet that is
	appliance is connected to an outlet having the same configuration as	properly installed and grounded in		Grounding Pin
	the plug. No plug adapter should be used with this appliance.	accordance with all local codes and ordinances.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

2 www.BISSELL.com

Thanks for buying a BISSELL CrossWave®

We love to clean and we’re excited to share one of our innovative products with you. We want your CrossWave to work like new for the years to come, so this guide has tips on how to use, maintain and, if there’s a problem, troubleshoot.

Your CrossWave needs a little assembly before getting to work, so flip to the “assembly” section and let’s get started!

What’s In The Box?

	Dual Action
Handle	Multi-Surface	Storage Tray	Brush Roll	Multi-Surface
	Brush Roll		Drying Tray	Formula

NOTE: Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Safety Instructions . . . . . . . . .	. . 2	Maintenance & Care	. . . . .9.-13
Product View . . . . . . . . . . . . . .	. .4	Troubleshooting . . . . .	. . . . . . . 14
Assembly . . . . . . . . . . . . . .	. 5. . . .	Warranty . . . . . . . . . . . .	. . . . . . . 15
Cleaning Formulas . . . . . . . . .	. .5	Service . . . . . . . . . . . . . .	. . . . . . . 15
Operations . . . . . . . . . . . . . . . .	6-8	Product Registration .	. . . . . . . 16

www.BISSELL.com 3

Getting to Know Your CrossWave®

1

2

8

9

10

5

11

	3		6
	4	7		12
1	Upper Handle		7	Foot
2	SMARTCLEAN® Fingertip Controls		8	Solution Spray Trigger
3	Float Stack		9	Quick Release™ Cord Wrap
4	Easy Remove Brush Window		10	Clean Water Tank
5	Integrated Carry Handle		11	Lower Cord Wrap
6	Dirty Water Tank		12	Easy Clean Storage Tray

4 www.BISSELL.com

Assembly

WARNING

Do not plug in your CrossWave® until you are familiar with all instructions and operating procedures.

	1	Insert handle	2	Then, on the
		into body of
				back of the
		unit until you		machine, align
		hear a “click”.		Clean Water
		click		Tank with the
				grooves and
				slide tank into
				place until you
				hear a “click”.

3

Wrap the cord around the Quick Release™ Cord Wrap and the lower cord wrap.

4	The Easy Clean Storage Tray consists of
	a machine Storage Tray and a Brush Roll
	Drying Tray. To assemble the Easy Clean
	Storage Tray, align arrows on the storage
	tray with the arrows on the Brush Roll
	Drying Tray and slide into place.

NOTE: To easily unwrap the cord for use, just turn the Quick Release Cord Wrap downward to remove the cord from the cord wrap.

Cleaning Formulas

WARNING

To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL® cleaning fluids intended for use with the hard floor device.

Keep plenty of CrossWave formulas on hand so you can clean your hard floors and area rugs whenever it fits your schedule.

Always use CrossWave formulas in your machine. Other formulas may harm the machine and void the warranty.

CROSSWAVE® FORMULAS

	Multi-Surface	Wood Floor	Area Rug Formula
	Formula	Formula
	Great for cleaning	Restore your wood	Removes stuck on
	ALL sealed floors		and embedded dirt
		floors’ natural shine
	and area rugs		from area rugs

www.BISSELL.com 5