Biostar P4M900-M7 User Manual

P4M900-M7 SE/P4M890-M7 TE

Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction .......................................... 3

1.1 Before You Start ................................................................................ 3

1.2 Package Checklist ............................................................................. 3

1.3 Motherboard Features ...................................................................... 4

1.4 Rear Panel Connectors ..................................................................... 5

1.5 Motherboard Layout ........................................................................ 6

Chapter 2: Hardware Installation ........................... 7

2.1 Installing Central Processing Unit (CPU) ....................................... 7

2.2 Fan Headers ....................................................................................... 9

2.3 Installing System Memory .............................................................. 10

2.4 Connectors and Slots ....................................................................... 11

Chapter 3: Headers & Jumpers Setup ................... 13

3.1 How to Setup Jumpers .................................................................... 13

3.2 Detail Settings .................................................................................. 13

Chapter 4: RAID Functions ................................... 18

4.1 Operation System ............................................................................ 18

4.2 Raid Arrays ...................................................................................... 18

4.3 How RAID Works ............................................................................. 18

Chapter 5: Useful Help ......................................... 20

5.1 Driver Installation Note ................................................................. 20

5.2 Award BIOS Beep Code .................................................................. 21

5.3 Extra Information ........................................................................... 21

5.4 Troubleshooting ............................................................................... 22

Chapter 6: WarpSpeeder™ III .............................. 23

6.1 Introduction ..................................................................................... 23

6.2 System Requirement ....................................................................... 23

6.3 Installation ....................................................................................... 24

6.4 WarpSpeeder™ III ............................................................................ 25

Appendencies: SPEC In Other Language ............... 30

German ................................................................................................................. 30

France .................................................................................................................... 32

Italian .................................................................................................................... 34

Spanish .................................................................................................................. 36

Portuguese ............................................................................................................ 38

Polish ..................................................................................................................... 40

Russian .................................................................................................................. 42

Arabic .................................................................................................................... 44

Japanese ................................................................................................................ 46

CHAPTER 1: INTRODUCTION

P4M900-M7 SE/P4M890-M7 TE

1.1 B

EFORE YOU START

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with

sufficient lighting.

 Always disconnect the computer from power outlet

before operation.

 Before you take the motherboard out from anti-static

bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.

 Avoid touching the components on motherboard or the

rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short
circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

1.2 P

HDD Cable X 1
Installation Guide X 1
Fully Setup Driver CD X 1 (full version manual files inside)
Rear I/O Panel for ATX Case X 1
FDD Cable X 1 (optional)
Serial ATA Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Serial ATA Power Cable X 1 (optional)

Note: The package contents may differ by area or your motherboard version.

ACKAGE CHECKLIST

3

Motherboard Manual

1.3 MOTHERBOARD FEATURES

P4M900-M7 SE P4M890-M7 TE

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx processor up to 3.8
GHz

CPU

FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz

Chipset

Graphic

Super I/O

Main
Memory

IDE

SATA

LAN PHY

Sound
Codec

Supports Hyper Threading/ Execute Disable
Bit/ Enhanced Intel SpeedStep®/ Intel
Extended Memory 64 technology
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Max Shared Video Memory is 256 MB
ITE 8712F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
DIMM Slots x 2
Supports DDR2 533 / 667
Each DIMM supports 256/512MB/1GB/2GB
DDR2
Max Memory Capicity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported
Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mode 0~4,
Integrated Serial ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification compliant.
Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (Optional)
10 / 100 Mb/s auto negotiation
Half / Full duplex capability
ALC662

5.1 channels audio out
High-Definition Audio support

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx processor up to 3.8
GHz
Supports Hyper Threading/ Execute Disable
Bit/ Enhanced Intel SpeedStep®/ Intel
Extended Memory 64 technology
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A
Unichrome Pro IGP
Max Shared Video Memory is 64 MB
ITE 8712F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
DIMM Slots x 2
Supports DDR2 533
Each DIMM supports 256/512MB/1GB/2GB
DDR2
Max Memory Capicity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported
Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mode 0~4,
Integrated Serial ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification compliant.
Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (Optional)
10 / 100 Mb/s auto negotiation
Half / Full duplex capability
ALC662

5.1 channels audio out
High-Definition Audio support

4

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

PCI Express x 16 slot x1 PCI Express x 16 slot x1

Slots

On Board
Connector

Back Panel
I/O

Board Size 190 mm (W) x 244 mm (L) 190 mm (W) x 244 mm (L)
Special
Feature

OS
Support

PCI Express x 1 slot x1 PCI Express x 1 slot x1
PCI slot x2 PCI slot x2
Floppy connector x1 Floppy connector x1
Printer Port Connector x1 Printer Port Connector x1
IDE Connector x2 IDE Connector x2
SATA Connector x2 SATA Connector x2
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
CD-in Connector x1 CD-in Connector x1
CPU Fan header x1 CPU Fan header x1
System Fan header x1 System Fan header x1
Clear CMOS header x1 Clear CMOS header x1
USB connector x2 USB connector x2
Power Connector (24pin) x1 Power Connector (24pin) x1
Power Connector (4pin) x1 Power Connector (4pin) x1
PS/2 Keyboard x1
PS/2 Mouse x1
Serial Port x1
VGA Port x1
LAN port x1
USB Port x4
Audio Jack x3

RAID 0 / 1 support RAID 0 / 1 support

Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS with or without notice.

PS/2 Keyboard x1
PS/2 Mouse x1
Serial Port x1
VGA Port x1
LAN port x1
USB Port x4
Audio Jack x3

Windows 2000 / XP
Biostar Reserves the right to add or remove
support for any OS with or without notice.

1.4 REAR PANEL CONNECTORS

PS/2
Mouse

LAN

Line I n/
Surr ound

Line Out

Mic In 1/
Bass/ Center

PS/2

COM1 VGA

USBX2USBX2

Keyboard

Since the audio chip supports High Definition Audio Specification, the function of each audio
jack can be defined by software. The input / output function of each audio jack listed above
represents the default setting. However, when connecting external microphone to the audio
port, please use the Line In (blue) and Mic In (Pink) audio jack.

5

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

JKBMS1

C
O

J

M

C

1

O
M
1

JVGA1

JPRNT1

JUSB1

JUSBLAN1

JAUDIO1

JATXPWR2

LAN

LGA775

CPU1

P4M900

or

P4M890

JCFAN1

JATXPWR1

DIMM2

DIMM1

IDE1

IDE2

PCI -EX16

Super

I/O

PCI -EX1_1

JCDIN1

BAT1

PCI1

JUSB2

JUSB3

BIO S

JSATA2

VIA

VT8237A

JSATA1

PCI2

Codec

JAUDI OF1

FDD1

JCMOS1

JPANEL1

JSFAN1

Note:

6

represents the 1st pin.

■

P4M900-M7 SE/P4M890-M7 TE

CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING CENTRAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.

Pin Cap

Step 1: Pull the socket locking lever out from the socket and then raise

the lever up to a 90-degree angle.

7

Motherboard Manual

Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.

Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.

8

P4M900-M7 SE/P4M890-M7 TE

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.

JCFAN1: CPU Fan Header

Pin

14

JSFAN1: System Fan Header

Assignment

1 Ground
2 +12V
3 FAN RPM rate

sense

4 Smart Fan

Control

Pin

Assignment

1 Ground
2 +12V
3 FAN RPM rate

sense

13

Note:

The JSFAN1 supports 3-pin head connector and the JCFAN1 supports 4-pin head
connector. When connecting with wires onto connectors, please note that the red wire is
the positive and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.

9

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

DIMM1

DIMM2

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

B. Memory Capacity

10

DIMM Socket

Location

DIMM1 256MB/512MB/1GB/2GB

DIMM2 256MB/512MB/1GB/2GB

DDR Module

Total Memory

Size

Max is 4GB.

P4M900-M7 SE/P4M890-M7 TE

CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector

The motherboard provides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the
provided floppy drive ribbon cable.

IDE1/IDE2: Hard Disk Connectors

The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. It has two
HDD connectors: IDE1 (primary) and IDE2 (secondary).

The IDE connectors can connect a master and a slave drive, so you can
connect up to four hard disk drives. The first hard drive should always be
connected to IDE1.

2

1

3940

21

34

33

IDE2IDE1

11

Motherboard Manual

PCI-EX16: PCI-Express x16 Slot

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 4GB/s simultaneously per

direction, for an aggregate of 8GB/s totally.

PCI-EX1_1: PCI-Express x1 Slot

- PCI-Express 1.0a compliant.

- Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

- 2X bandwidth over the traditional PCI architecture.

PCI-EX16

PCI-EX1_1

PCI1/PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.

12

PCI1

PCI2

P4M900-M7 SE/P4M890-M7 TE

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO SETUP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.

Pin opened Pin closed Pin1-2 closed

3.2 D

JPANEL1: Front Panel Header

ETAIL SETTINGS

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button and speaker connection. It allows user to connect the PC case’s front
panel switch functions.

PWR_LED

SLP

9
18

SPK

++

+

HLED

On/Off

-

16

-

RST

Pin Assignment Function Pin Assignment Function

1+5V
2 N/A 10 Ground
3 N/A 11 N/A N/A
4 Speaker 12 Power LED (+)
5 HDD LED (+)
6 HDD LED (-) 14 Power LED (-)
7 Ground
8 Reset control 16 Ground

Speaker
Connector

Hard drive
LED

Reset button

9 Sleep control

13 Power LED (+)

15 Power button

Sleep button

Power LED

Power-on button

13

Motherboard Manual

ATX Power Source Connector: JATXPWR1

JATXPWR1 allows user to connect 24-pin power connector on the ATX power
supply.

12

1

Pin Assignment Pin Assignment

24

13

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

JATXPWR2: ATX Power Source Connector

By connecting this connector, it will provide +12V to CPU power circuit.

Pin

1

2

4

3

Assignment

1 +12V
2 +12V
3 Ground
4 Ground

14

P4M900-M7 SE/P4M890-M7 TE

JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with internal USB devices, like USB card reader.

Assignment

Pin

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground

210

JUSB2

8 Ground
9 Key

10 NC

19

JUSB3

JSATA1/JSATA2: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 2 channels SATA interface,
it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.

Pin

Assignment

JSATA2

7

4

1

14 7

1 Ground
2 TX+
3 TX­4 Ground
5 RX­6 RX+
7 Ground

JSATA1

JAUDIOF1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. It will disable the output on back panel audio connectors.

Pin Assignment

1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense

210

19

8 Key
9 Left line in

10 Jack Sense

15

Motherboard Manual

JCDIN1: CD-ROM Audio-in Connector

This connector allows user to connect the audio source from the variaty devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

JCMOS1: Clear CMOS Header

By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the motherboard.

Pin

Assignment

1 Left Channel Input
2 Ground
3 Ground
4 Right Channel Input

4

1

Pin 1-2 Close:

Normal Operation (default).

3

1

3

1

16

13

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.

JPRNT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy

9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

P4M900-M7 SE/P4M890-M7 TE

25

1

2

17

Motherboard Manual

CHAPTER 4: RAID FUNCTIONS

4.1 O

 Supports Windows XP Home/Professional Edition, and Windows 2000 Professional.

PERATION SYSTEM

4.2 RAID ARRAYS

RAID supports the following types of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

many applications.

RAID 1: RAID 1 defines techniques for mirroring data.

4.3 HOW RAID WORKS

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

 Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the

platform.

 Uses: Intended for non-critical data requiring high data throughput, or any

environment that does not require fault tolerance.

 Benefits: provides increased data throughput, especially for large files. No

capacity loss penalty for parity.

 Drawbacks: Does not deliver any fault tolerance. If any drive in the array

fails, all data is lost.

 Fault Tolerance: No.

18

Block 1
Block 3
Block 5

Block 2
Block 4
Block 6

P4M900-M7 SE/P4M890-M7 TE

RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.

Features and Benefits

 Drives: Minimum 2, and maximum is 2.
 Uses: RAID 1 is ideal for small databases or any other application that

requires fault tolerance and minimal capacity.

 Benefits: Provides 100% data redundancy. Should one drive fail, the

controller switches to the other drive.

 Drawbacks: Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

 Fault Tolerance: Yes.

Block 1

Block 2
Block 3

Block 1
Block 2
Block 3

19

Motherboard Manual

CHAPTER 5: USEFUL HELP

5.1 D

RIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep2.html

20

P4M900-M7 SE/P4M890-M7 TE

5.2 AWARD BIOS BEEP CODE

Beep Sound Meaning

One long beep followed by two short
beeps

High-low siren sound CPU overheated

One Short beep when system boot-up No error found during POST

Long beeps every other second No DRAM detected or install

Video card not found or video card
memory bad

System will shut down automatically

5.3 E

XTRA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

21

Motherboard Manual

5.4 TROUBLESHOOTING

Probable Solution

1. No power to the system at all
Power light don’t illuminate, fan
inside power supply does not turn
on.

2. Indicator light on keyboard does
not turn on.

System inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drive is spinning.

System does not boot from hard disk
drive, can be booted from optical drive.

System only boots from optical drive.
Hard disk can be read and applications
can be used but booting from hard disk
is impossible.

Screen message says “Invalid
Configuration” or “CMOS Failure.”

Cannot boot system after installing
second hard drive.

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Contact technical support.

Using even pressure on both ends of
the DIMM, press down firmly until the
module snaps into place.

1. Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.

2. Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.

1. Back up data and applications
files.

2. Reformat the hard drive.
Re-install applications and data
using backup disks.

Review system’s equipment. Make sure
correct information is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.

22

P4M900-M7 SE/P4M890-M7 TE

CHAPTER 6: WARPSPEEDER™ III

6.1 INTRODUCTION

[WarpSpeeder™ III], a new powerful control utility, features three
user-friendly functions including Overclock Manager, Overvoltage
Manager, and Hardware Monitor.

With the Overclock Manager, users can easily adjust the frequency they
prefer or they can get the best CPU performance with just one click. The
Overvoltage Manager, on the other hand, helps to power up CPU core
voltage and Memory voltage. The cool Hardware Monitor smartly indicates
the temperatures, voltage and CPU fan speed as well as the chipset
information. Also, in the About panel, you can get detail descriptions about
BIOS model and chipsets. In addition, the frequency status of CPU,
memory, VGA and PCI along with the CPU speed are synchronically
shown on our main panel.

Moreover, to protect users' computer systems if the setting is not
appropriate when testing and results in system fail or hang,
[WarpSpeeder™ III] technology assures the system stability by
automatically rebooting the computer and then restart to a speed that is
either the original system speed or a suitable one.

6.2 S

YSTEM REQUIREMENT

OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP
DirectX: DirectX 8.1 or above. (The Windows XP operating system

includes DirectX 8.1. If you use Windows XP, you do not need to install
DirectX 8.1.)

23

Motherboard Manual

6.3 INSTALLATION

1. Execute the setup execution file, and then the following dialog will pop
up. Please click “Next” button and follow the default procedure to
install.

2. When you see the following dialog in setup procedure, it means setup
is completed. Click “Finish” button.

24

Usage:

The following figures are only for reference, the screen printed in this
user manual will change according to your motherboard on hand.

6.4 WARPSPEEDER™ III

1. Desktop Icon:

After the [WarpSpeeder™ III] has been installed, a [WarpSpeeder™ III]
icon will appear on the desktop, just like the icon shown below.

Now you can launch the [WarpSpeeder™ III] utility simply by
double-clicking the desktop icon.

2. Main Panel

If you double-click the desktop icon, [WarpSpeeder™ III] will be
launched. Please refer to the following figure; the utility’s first window
you will see is Main Panel.

Main Panel contains features as follows:

a. Display the CPU Speed, CPU external clock, Memory clock, VGA

clock, and PCI clock information.

P4M900-M7 SE/P4M890-M7 TE

b. Contains About, Voltage/Overclock, and Hardware Monitor

Buttons for invoking respective panels. The On/Off button is for
closing the program.

25

Motherboard Manual

3. Overclock/Overvoltage Panel

Click the Overclock/Overvoltage button in the Main Panel, the button
will be highlighted and the Overclock/Overvoltage Panel will show
up as the following figure. As you can see, the Overclock Panel is
on the right side, and the Overvoltage Panel is on the left side.

26

P4M900-M7 SE/P4M890-M7 TE

Overclock Panel contains these features:

a. “Auto-Overclock”:

User can click this button and [WarpSpeeder™ III] will set the best
and stable performance and frequency automatically. A warning
dialog as below will show up to notify you that the system may
become unstable, click on “OK” to proceed.

Then [WarpSpeeder™ III] utility will execute a series of testing
until system fail. Then system will do fail-safe reboot by using
Watchdog function. After reboot, launch the [WarpSpeeder™ III]
utility again and the utility will load the previously verified best and
stable frequency.

b. “Verify”:

If you use the “Manual Adjust” bar to adjust the CPU frequency,
then you can click this button and [WarpSpeeder™ III] will proceed
a testing for current frequency. If the testing is ok, then the current
frequency will be saved into system registry. If the testing fails,
system will do a fail-safe rebooting. After reboot, the
[WarpSpeeder™ III] utility will restore to the hardware default
setting.

Warning:

Manually overclock is potentially dangerous, especially when the
overclocking percentage is over 110 %. We strongly recommend you
verify every speed you overclock by click the Verify button. Or, you can
just click Auto overclock button and let [WarpSpeeder™ III]
automatically gets the best result for you.

c. “V3 Engine”/“V6 Engine”/“V9 Engine”:

Provide user the ability to do real-time overclock adjustment.

d. “Recovery”:

Click this button and the [WarpSpeeder™ III] utility will restore all
values to the hardware default setting.

27

Motherboard Manual

Overvoltage Panel contains these features:

a. “CPU Voltage”:

This function allows user to adjust CPU voltage. Click on “+” to
increase or “-“ to decrease the CPU voltage.

b. “Memory Voltage”:

This function allows user to adjust Memory voltage. Click on “+”
to increase or “-“ to decrease the Memory voltage.

4. Hardware Monitor Panel

Click the Hardware Monitor button in Main Panel, the button will be
highlighted and the Hardware Monitor panel will show up as the
following figure.

In this panel, you can get the real-time status information of your
system. The information will be refreshed every 1 second.

28

P4M900-M7 SE/P4M890-M7 TE

5. About Panel

Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will show up as the following figure.

In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the the version number of [WarpSpeeder™ III] utility.

Note:

Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™ III]
divide these features to separate panels. If one chipset is not on
board, the correlative button in Main panel will be disabled, but will
not interfere other panels’ functions. This property can make
[WarpSpeeder™ III] utility more robust.

29

Motherboard Manual

APPENDENCIES: SPEC IN OTHER LANGUAGE

G

ERMAN

P4M900-M7 SE P4M890-M7 TE

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx Prozessoren mit
bis zu 3,8 GHz

CPU

FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz

Chipsatz

Grafik

Super E/A

Arbeitsspeic
her

IDE

SATA

Unterstützt Hyper-Threading / Execute
Disable Bit / Enhanced Intel SpeedStep® /
Intel Architecture-64 / Extended Memory
64 Technology
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Max. 256MB gemeinsam benutzter
Videospeicher
ITE 8712F
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
Lüfterdrehzahl-Controller
"Smart Guardian"-Funktion von ITE
DDR2 DIMM-Steckplätze x 2
Unterstützt DDR2 533 / 667
Jeder DIMM unterstützt
256/512MB/1GB/2GB DDR2.
Max. 4GB Arbeitsspeicher
Ein-Kanal DDR2 Speichermodul
registrierte DIMMs. ECC DIMMs werden
nicht unterstützt.
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133Bus
Master-Modus
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Datentransferrate bis zu 1.5Gb/s
Konform mit der SATA-Spezifikation
Version 1.0.

30

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx Prozessoren mit
bis zu 3,8 GHz
Unterstützt Hyper-Threading / Execute
Disable Bit / Enhanced Intel SpeedStep® /
Intel Architecture-64 / Extended Memory
64 Technology
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A
Unichrome Pro IGP
Max. 64MB gemeinsam benutzter
Videospeicher
ITE 8712F
Bietet die häufig verwendeten alten Super
E/A-Funktionen.
Low Pin Count-Schnittstelle
Umgebungskontrolle,
Hardware-Überwachung
Lüfterdrehzahl-Controller
"Smart Guardian"-Funktion von ITE
DDR2 DIMM-Steckplätze x 2
Unterstützt DDR2 533
Jeder DIMM unterstützt
256/512MB/1GB/2GB DDR2.
Max. 4GB Arbeitsspeicher
Ein-Kanal DDR2 Speichermodul
registrierte DIMMs. ECC DIMMs werden
nicht unterstützt.
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133Bus
Master-Modus
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Datentransferrate bis zu 1.5Gb/s
Konform mit der SATA-Spezifikation
Version 1.0.

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Audio-Code
c

Steckplätze

Onboard-An
schluss

Rückseiten­E/A

Platinengrö
ße.
Sonderfunkt
ionen

OS-Unterst
ützung

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (optional)
10 / 100 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion
ALC662
Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe
PCI-Steckplatz x2 PCI-Steckplatz x2
PCI Express x16 Steckplatz x1 PCI Express x16 Steckplatz x1
PCI Express x 1-Steckplatz x1 PCI Express x 1-Steckplatz x1
Diskettenlaufwerkanschluss x1 Diskettenlaufwerkanschluss x1
Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1
IDE-Anschluss x2 IDE-Anschluss x2
SATA-Anschluss x2 SATA-Anschluss x2
Fronttafelanschluss x1 Fronttafelanschluss x1
Front-Audioanschluss x1 Front-Audioanschluss x1
CD-IN-Anschluss x1 CD-IN-Anschluss x1
CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1
System-Lüfter-Sockel x1 System-Lüfter-Sockel x1
"CMOS löschen"-Sockel x1 "CMOS löschen"-Sockel x1
USB-Anschluss x2 USB-Anschluss x2
Stromanschluss (24-polig) x1 Stromanschluss (24-polig) x1
Stromanschluss (4-polig) x1 Stromanschluss (4-polig) x1
PS/2-Tastatur x1
PS/2-Maus x1
Serieller Anschluss x1
VGA-Anschluss x1
LAN-Anschluss x1
USB-Anschluss x4
Audioanschluss x3

190 mm (B) X 244 mm (L) 190 mm (B) X 244 mm (L)

Unterstützt RAID 0 / 1 Unterstützt RAID 0 / 1

Windows 2K / XP / VISTA
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
entfernen.

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (optional)
10 / 100 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion
ALC662
Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe

PS/2-Tastatur x1
PS/2-Maus x1
Serieller Anschluss x1
VGA-Anschluss x1
LAN-Anschluss x1
USB-Anschluss x4
Audioanschluss x3

Windows 2K / XP
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
entfernen.

31

Motherboard Manual

FRANCE

P4M900-M7 SE P4M890-M7 TE

LGA 775
Processeurs Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx jusqu'à
3,8 GHz
Prend en charge les technologies

UC

Bus frontal 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz

Chipset

Graphique
s

Super E/S

Mémoire
principale

IDE

SATA

Hyper-Threading / d'exécution de bit de
désactivation / Intel SpeedStep®
optimisée/ d'architecture Intel 64 / de
mémoire étendue 64
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Mémoire vidéo partagée maximale de 256
Mo
ITE 8712F
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Moniteur de matériel
Contrôleur de vitesse de ventilateur
Fonction "Gardien intelligent" de l'ITE
Fentes DDR2 DIMM x 2
Prend en charge la DDR2 533 / 667
Chaque DIMM prend en charge des DDR2
de 256 Mo /512 Mo / 1Go / 2 Go
Capacité mémoire maximale de 4 Go
Module de mémoire DDR2 à mode à simple
voie
Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne sont pas prises en
charge
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 /
100 / 133
Prend en charge le mode PIO 0~4,
Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécification SATA Version

1.0

LGA 775
Processeurs Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx jusqu'à
3,8 GHz
Prend en charge les technologies
Hyper-Threading / d'exécution de bit de
désactivation / Intel SpeedStep®
optimisée/ d'architecture Intel 64 / de
mémoire étendue 64
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A
Unichrome Pro IGP
Mémoire vidéo partagée maximale de 64
Mo
ITE 8712F
Fournit la fonctionnalité de Super E/S
patrimoniales la plus utilisée.
Interface à faible compte de broches
Initiatives de contrôle environnementales,
Moniteur de matériel
Contrôleur de vitesse de ventilateur
Fonction "Gardien intelligent" de l'ITE
Fentes DDR2 DIMM x 2
Prend en charge la DDR2 533
Chaque DIMM prend en charge des DDR2
de 256 Mo /512 Mo / 1Go / 2 Go
Capacité mémoire maximale de 4 Go
Module de mémoire DDR2 à mode à simple
voie
Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne sont pas prises en
charge
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 /
100 / 133
Prend en charge le mode PIO 0~4,
Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécification SATA Version

1.0

32

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Codec
audio

Fentes

Connecteu
r
embarqué

E/S du
panneau
arrière

Dimension
s de la
carte
Fonctionna
lités
spéciales

Support
SE

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (en option)
10 / 100 Mb/s négociation automatique
Half / Full duplex capability
ALC662
Prise en charge de l'audio haute définition
Sortie audio à 5.1 voies
Fente PCI x2 Fente PCI x2
Slot PCI Express x16 x1 Slot PCI Express x16 x1
Slot PCI Express x 1 x1 Slot PCI Express x 1 x1
Connecteur de disquette x1 Connecteur de disquette x1
Connecteur de Port d'imprimante x1 Connecteur de Port d'imprimante x1
Connecteur IDE x2 Connecteur IDE x2
Connecteur SATA x2 Connecteur SATA x2
Connecteur du panneau avant x1 Connecteur du panneau avant x1
Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1
Connecteur d'entrée CD x1 Connecteur d'entrée CD x1
Embase de ventilateur UC x1 Embase de ventilateur UC x1
Embase de ventilateur système x1 Embase de ventilateur système x1
Embase d'effacement CMOS x1 Embase d'effacement CMOS x1
Connecteur USB x2 Connecteur USB x2
Connecteur d'alimentation x1
(24 broches)
Connecteur d'alimentation x1
(4 broches)
Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port VGA x1
Port LAN x1
Port USB x4
Fiche audio x3

190 mm (l) X 244 mm (H) 190 mm (l) X 244 mm (H)

Prise en charge RAID 0 / 1 Prise en charge RAID 0 / 1

Windows 2K / XP / VISTA
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans
préavis.

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (en option)
10 / 100 Mb/s négociation automatique
Half / Full duplex capability
ALC662
Prise en charge de l'audio haute définition
Sortie audio à 5.1 voies

Connecteur d'alimentation x1
(24 broches)
Connecteur d'alimentation x1
(4 broches)
Clavier PS/2 x1
Souris PS/2 x1
Port série x1
Port VGA x1
Port LAN x1
Port USB x4
Fiche audio x3

Windows 2K / XP
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans
préavis.

33

Motherboard Manual

ITALIAN

P4M900-M7 SE P4M890-M7 TE

LGA 775
Processore Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx fino a

3.8 GHz

CPU

FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz

Chipset

Grafica

Super I/O

Memoria
principale

IDE

SATA

Supporto di Hyper-Threading / Execute
Disable Bit / Enhanced Intel SpeedStep® /
Architettura Intel 64 / Tecnologia Extended
Memory 64
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
La memoria video condivisa massima è di
256MB
ITE 8712F
Fornisce le funzionalità legacy Super I/O
usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Controller velocità ventolina
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR2 x 2
Supporto di DDR2 533 / 667
Ciascun DIMM supporta DDR2 256MB /
512MB / 1GB / 2GB
Capacità massima della memoria 4GB
Modulo di memoria DDR2 a canale singolo
DIMM registrati e DIMM ECC non sono
supportati
Controller IDE integrato
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 133
Supporto modalità PIO Mode 0-4
Controller Serial ATA integrato
Velocità di trasferimento dei dati fino a 1.5
Gb/s.
Compatibile specifiche SATA Versione 1.0.

LGA 775
Processore Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx fino a

3.8 GHz
Supporto di Hyper-Threading / Execute
Disable Bit / Enhanced Intel SpeedStep® /
Architettura Intel 64 / Tecnologia Extended
Memory 64
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A
Unichrome Pro IGP
La memoria video condivisa massima è di
64MB
ITE 8712F
Fornisce le funzionalità legacy Super I/O
usate più comunemente.
Interfaccia LPC (Low Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Controller velocità ventolina
Funzione "Smart Guardian" di ITE
Alloggi DIMM DDR2 x 2
Supporto di DDR2 533
Ciascun DIMM supporta DDR2 256MB /
512MB / 1GB / 2GB
Capacità massima della memoria 4GB
Modulo di memoria DDR2 a canale singolo
DIMM registrati e DIMM ECC non sono
supportati
Controller IDE integrato
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 133
Supporto modalità PIO Mode 0-4
Controller Serial ATA integrato
Velocità di trasferimento dei dati fino a 1.5
Gb/s.
Compatibile specifiche SATA Versione 1.0.

34

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Codec
audio

Alloggi

Connettori
su scheda

I/O
pannello
posteriore

Dimension
i scheda
Caratterist
iche
speciali

Sistemi
operativi
supportati

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (optional)
Negoziazione automatica 10 / 100 Mb/s
Capacità Half / Full Duplex
ALC662
Supporto audio High-Definition (HD)
Uscita audio 5.1 canali
Alloggio PCI x2 Alloggio PCI x2
Alloggio PCI Express x16 x1 Alloggio PCI Express x16 x1
Alloggio PCI Express x1 x1 Alloggio PCI Express x1 x1
Connettore floppy x1 Connettore floppy x1
Connettore Porta stampante x1 Connettore Porta stampante x1
Connettore IDE x2 Connettore IDE x2
Connettore SATA x2 Connettore SATA x2
Connettore pannello frontale x1 Connettore pannello frontale x1
Connettore audio frontale x1 Connettore audio frontale x1
Connettore CD-in x1 Connettore CD-in x1
Collettore ventolina CPU x1 Collettore ventolina CPU x1
Collettore ventolina sistema x1 Collettore ventolina sistema x1
Collettore cancellazione CMOS x1 Collettore cancellazione CMOS x1
Connettore USB x2 Connettore USB x2
Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(4 pin)
Tastiera PS/2 x1
Mouse PS/2 x1
Porta seriale x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Connettore audio x3

190 mm (larghezza) x 244 mm (altezza) 190 mm (larghezza) x 244 mm (altezza)

Supporto RAID 0 / 1 Supporto RAID 0 / 1

Windows 2K / XP / VISTA
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (optional)
Negoziazione automatica 10 / 100 Mb/s
Capacità Half / Full Duplex
ALC662
Supporto audio High-Definition (HD)
Uscita audio 5.1 canali

Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(4 pin)
Tastiera PS/2 x1
Mouse PS/2 x1
Porta seriale x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Connettore audio x3

Windows 2K / XP
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
operativo senza preavviso.

35

Motherboard Manual

SPANISH

P4M900-M7 SE P4M890-M7 TE

LGA 775
Procesador Intel Core2Duo / Pentium 4 /
Pentium D / Celeron D / Celeron 4xx hasta
3,8 GHz
Admite Hyper-Threading / Bit de

CPU

FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz
Conjunto
de chips

Gráficos

Súper E/S

Memoria
principal

IDE

SATA

deshabilitación de ejecución / Intel
SpeedStep® Mejorado / Intel
Architecture-64 / Tecnología Extended
Memory 64
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Memoria máxima de vídeo compartida de
256MB
ITE 8712F
Le ofrece las funcionalidades heredadas de
uso más común Súper E/S.
Interfaz de cuenta Low Pin
Iniciativas de control de entorno,
Monitor hardware
Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR2 x 2
Admite DDR2 de 533 / 667
Cada DIMM admite DDR de 256MB /512MB
/1GB / 2GB
Capacidad máxima de memoria de 4GB
Módulo de memoria DDR2 de canal Sencillo
No admite DIMM registrados o DIMM
compatibles con ECC
Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100
/ 133
Soporte los Modos PIO 0~4,
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 1.5 Gb/s.
Compatible con la versión SATA 1.0.

LGA 775
Procesador Intel Core2Duo / Pentium 4 /
Pentium D / Celeron D / Celeron 4xx hasta
3,8 GHz
Admite Hyper-Threading / Bit de
deshabilitación de ejecución / Intel
SpeedStep® Mejorado / Intel
Architecture-64 / Tecnología Extended
Memory 64
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A
Unichrome Pro IGP
Memoria máxima de vídeo compartida de
64MB
ITE 8712F
Le ofrece las funcionalidades heredadas de
uso más común Súper E/S.
Interfaz de cuenta Low Pin
Iniciativas de control de entorno,
Monitor hardware
Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR2 x 2
Admite DDR2 de 533
Cada DIMM admite DDR de 256MB /512MB
/1GB / 2GB
Capacidad máxima de memoria de 4GB
Módulo de memoria DDR2 de canal Sencillo
No admite DIMM registrados o DIMM
compatibles con ECC
Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100
/ 133
Soporte los Modos PIO 0~4,
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 1.5 Gb/s.
Compatible con la versión SATA 1.0.

36

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Red Local

Códecs de
sonido

Ranuras

Conectore
s en placa

Panel
trasero de
E/S

Tam a ñ o de
la placa
Funciones
especiales

Soporte de
sistema
operativo

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (opcional)
Negociación de 10 / 100 Mb/s
Funciones Half / Full dúplex
ALC662
Soporte de sonido de Alta Definición
Salida de sonido de 5.1 canales
Ranura PCI X2 Ranura PCI X2
Ranura PCI Express x16 X1 Ranura PCI Express x16 X1
Ranura PCI express x 1 X1 Ranura PCI express x 1 X1
Conector disco flexible X1 Conector disco flexible X1
Conector Puerto de impresora X1 Conector Puerto de impresora X1
Conector IDE X2 Conector IDE X2
Conector SATA X2 Conector SATA X2
Conector de panel frontal X1 Conector de panel frontal X1
Conector de sonido frontal X1 Conector de sonido frontal X1
Conector de entrada de CD X1 Conector de entrada de CD X1
Cabecera de ventilador de CPU X1 Cabecera de ventilador de CPU X1
Cabecera de ventilador de
sistema X1
Cabecera de borrado de CMOS X1 Cabecera de borrado de CMOS X1
Conector USB X2 Conector USB X2
Conector de alimentación X1
(24 patillas)
Conector de alimentación X1
(4 patillas)
Tecl a d o P S /2 X 1
Ratón PS/2 X1
Puerto serie X1
Puerto VGA X1
Puerto de red local X1
Puerto USB X4
Conector de sonido X3

190mm. (A) X 244 Mm. (H) 190mm. (A) X 244 Mm. (H)

Admite RAID 0 / 1 Admite RAID 0 / 1

Windows 2K / XP / VISTA
Biostar se reserva el derecho de añadir o
retirar el soporte de cualquier SO con o sin
aviso previo.

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (opcional)
Negociación de 10 / 100 Mb/s
Funciones Half / Full dúplex
ALC662
Soporte de sonido de Alta Definición
Salida de sonido de 5.1 canales

Cabecera de ventilador de
sistema X1

Conector de alimentación X1
(24 patillas)
Conector de alimentación X1
(4 patillas)
Tecl a d o P S /2 X 1
Ratón PS/2 X1
Puerto serie X1
Puerto VGA X1
Puerto de red local X1
Puerto USB X4
Conector de sonido X3

Windows 2K / XP
Biostar se reserva el derecho de añadir o
retirar el soporte de cualquier SO con o sin
aviso previo.

37

Motherboard Manual

PORTUGUESE

P4M900-M7 SE P4M890-M7 TE

LGA 775
Processador Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx até 3,8
GHz

CPU

FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz

Chipset

Placa
gráfica

Especificaç
ão Super
I/O

Memória
principal

IDE

SATA

Suporta as tecnologias Hyper-Threading /
Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Arquitecture -64 /
Extended Memory 64
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Memória de vídeo máxima partilhada: 256
MB
ITE 8712F
Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.
Interface LPC (Low Pin Count).
Iniciativas para controlo do ambiente
Monitorização do hardware
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR2 x 2
Suporta módulos DDR2 533 / 667
Cada módulo DIMM suporta uma memória
DDR2 de 256MB /512 MB / 1 GB / 2GB
Capacidade máxima de memória: 4 GB
Módulo de memória DDR2 de canal simples
Os módulos DIMM registados e os DIMM
ECC não são suportados
Controlador IDE integrado
Modo Bus master Ultra DMA 33 / 66 / 100 /
133
Suporta o modo PIO 0~4,
Controlador Serial ATA integrado
Velocidades de transmissão de dados até

1.5 Gb/s.
Compatibilidade com a especificação SATA
versão 1.0.

LGA 775
Processador Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx até 3,8
GHz
Suporta as tecnologias Hyper-Threading /
Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Arquitecture -64 /
Extended Memory 64
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A
Unichrome Pro IGP
Memória de vídeo máxima partilhada: 64
MB
ITE 8712F
Proporciona as funcionalidades mais
utilizadas em termos da especificação
Super I/O.
Interface LPC (Low Pin Count).
Iniciativas para controlo do ambiente
Monitorização do hardware
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR2 x 2
Suporta módulos DDR2 533
Cada módulo DIMM suporta uma memória
DDR2 de 256MB /512 MB / 1 GB / 2GB
Capacidade máxima de memória: 4 GB
Módulo de memória DDR2 de canal simples
Os módulos DIMM registados e os DIMM
ECC não são suportados
Controlador IDE integrado
Modo Bus master Ultra DMA 33 / 66 / 100 /
133
Suporta o modo PIO 0~4,
Controlador Serial ATA integrado
Velocidades de transmissão de dados até

1.5 Gb/s.
Compatibilidade com a especificação SATA
versão 1.0.

38

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Codec de
som

Ranhuras

Conectore
s na placa

Entradas/
Saídas no
painel
traseiro

Tamanho
da placa
Característ
icas
especiais
Sistemas
operativos
suportado
s

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (opcional)
Auto negociação de 10 / 100 MB/s
Capacidade semi/full-duplex
ALC662
Suporta a especificação High-Definition
Audio
Saída de áudio de 5.1 canais
Ranhura PCI x2 Ranhura PCI x2
Ranhura PCI Express x16 x1 Ranhura PCI Express x16 x1
Ranhura PCI Express x 1 x1 Ranhura PCI Express x 1 x1
Conector da unidade de disquetes x1 Conector da unidade de disquetes x1
Conector da para impressora x1 Conector da para impressora x1
Conector IDE x2 Conector IDE x2
Conector SATA x2 Conector SATA x2
Conector do painel frontal x1 Conector do painel frontal x1
Conector de áudio frontal x1 Conector de áudio frontal x1
Conector para entrada de CDs x1 Conector para entrada de CDs x1
Conector da ventoinha da CPU x1 Conector da ventoinha da CPU x1
Conector da ventoinha do
sistema x1
Conector para limpeza do CMOS x1 Conector para limpeza do CMOS x1
Conector USB x2 Conector USB x2
Conector de alimentação x1
(24 pinos)
Conector de alimentação x1
(4 pinos)
Tecl a d o P S /2 x 1
Rato PS/2 x1
Porta série x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Tomada de áudio x3

190 mm (L) X 244 mm (A) 190 mm (L) X 244 mm (A)

Suporta as funções RAID 0 / 1 Suporta as funções RAID 0 / 1

Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar
ou remover suporte para qualquer sistema
operativo com ou sem aviso prévio.

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (opcional)
Auto negociação de 10 / 100 MB/s
Capacidade semi/full-duplex
ALC662
Suporta a especificação High-Definition
Audio
Saída de áudio de 5.1 canais

Conector da ventoinha do
sistema x1

Conector de alimentação x1
(24 pinos)
Conector de alimentação x1
(4 pinos)
Tecl a d o P S /2 x 1
Rato PS/2 x1
Porta série x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Tomada de áudio x3

Windows 2K / XP
A Biostar reserva-se o direito de adicionar
ou remover suporte para qualquer sistema
operativo com ou sem aviso prévio.

39

Motherboard Manual

T

POLISH

P4M900-M7 SE P4M890-M7 TE

LGA 775
Procesor Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx do 3,8
GHz

Procesor

FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz

Chipset

Grafika

Pamięć
główna

Super I/O

IDE

SATA

Obsługa Hyper-Threading / Execute Disable
Bit / Enhanced Intel SpeedStep® / Intel
Architecture-64 / Extended Memory 64
Technology
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Maks. wielkość współdzielonej pamięci
video wynosi 256MB
Gniazda DDR2 DIMM x 2
Obsługa DDR2 533 / 667
Każde gniazdo DIMM obsługuje moduły
256MB /512MB / 1GB / 2GB DDR2
Maks. wielkość pamięci 4GB
Moduł pamięci DDR2 z trybem
pojedynczego kanału
Brak obsługi Registered DIMM oraz ECC
DIMM
ITE 8712F
Zapewnia najbardziej powszechne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Monitor H/W
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guardian"
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Master
obsługa PIO tryb 0~4,
Zintegrowany kontroler Serial ATA
Transfer danych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji

1.0.

40

LGA 775
Procesor Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx do 3,8
GHz
Obsługa Hyper­Bit / Enhanced Intel SpeedStep® / Intel
Architecture-64 / Extended Memory 64
Technology
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A
Unichrome Pro IGP
Maks. wielkość współdzielonej pamięci
video wynosi 64MB
Gniazda DDR2 DIMM x 2
Obsługa DDR2 533
Każde gniazdo DIMM obsługuje moduły
256MB /512MB / 1GB / 2GB DDR2
Maks. wielkość pamięci 4GB
Moduł pamięci DDR2 z trybem
pojedynczego kanału
Brak obsługi Registered DIMM oraz ECC
DIMM
ITE 8712F
Zapewnia najbardziej powszechne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warunków pracy,
Monitor H/W
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guardian"
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Master
obsługa PIO tryb 0~4,
Zintegrowany kontroler Serial ATA
Transfer danych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji

1.0.

hreading / Execute Disable

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (opcja)
10 / 100 Mb/s z automatyczną negocjacją
szybkości
Działanie w trybie połowicznego / pełnego
dupleksu
ALC662
Obsługa High-Definition Audio

5.1 kanałowe wyjście audio

Złącze główkowe wentylatora
systemowego x1
Złącze główkowe kasowania
CMOS x1

Klawiatura PS/2 x1
Mysz PS/2 x1
Port szeregowy x1
Port VGA x1
Port LAN x1
Port USB x4
Gniazdo audio x3

Windows 2K / XP
Biostar zastrzega sobie prawo dodawania
lub odwoływania obsługi dowolnego
systemu operacyjnego bez powiadomienia.

LAN PHY

Kodek
dźwiękowy

Gniazda

Złącza
wbudowan
e

Back Panel
I/O

Wymiary
płyty
Funkcje
specjalne
Obsluga
systemu
operacyjn
ego

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (opcja)
10 / 100 Mb/s z automatyczną negocjacją
szybkości
Działanie w trybie połowicznego / pełnego
dupleksu
ALC662
Obsługa High-Definition Audio

5.1 kanałowe wyjście audio
Gniazdo PCI x2 Gniazdo PCI x2
Gniazdo PCI Express x16 x1 Gniazdo PCI Express x16 x1
Gniazdo PCI Express x 1 x1 Gniazdo PCI Express x 1 x1
Złącze napędu dyskietek x1 Złącze napędu dyskietek x1
Złącze Port drukarki x1 Złącze Port drukarki x1
Złącze IDE x2 Złącze IDE x2
Złącze SATA x2 Złącze SATA x2
Złącze panela przedniego x1 Złącze panela przedniego x1
Przednie złącze audio x1 Przednie złącze audio x1
Złącze wejścia CD x1 Złącze wejścia CD x1
Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora procesora x1
Złącze główkowe wentylatora
systemowego x1
Złącze główkowe kasowania
CMOS x1
Złącze USB x2 Złącze USB x2
Złącze zasilania (24 pinowe) x1 Złącze zasilania (24 pinowe) x1
Złącze zasilania (4 pinowe) x1 Złącze zasilania (4 pinowe) x1
Klawiatura PS/2 x1
Mysz PS/2 x1
Port szeregowy x1
Port VGA x1
Port LAN x1
Port USB x4
Gniazdo audio x3

190 mm (S) X 244 mm (W) 190 mm (S) X 244 mm (W)

Obsługa RAID 0 / 1 Obsługa RAID 0 / 1

Windows 2K / XP / VISTA
Biostar zastrzega sobie prawo dodawania
lub odwoływania obsługi dowolnego
systemu operacyjnego bez powiadomienia.

41

Motherboard Manual

T

RUSSIAN

P4M900-M7 SE P4M890-M7 TE

LGA 775
Процессор Intel Core2Duo/ Pentium 4 /

CPU
(централь

ный
процессор

)

FSB 533 / 800 / 1066 МГц 533 / 800 / 1066 МГц

Набор
микросхе
м

Графика

Основная
память

Super I/O

IDE

SATA

Pentium D / Celeron D / Celeron 4xx до 3.8

ГГц
Поддержка технологий Hyper-

Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 /
Extended Memory 64 Technology
*It is recommended to use processors with
95W power consumption.

VIA P4M900
VIA VT8237A

Chrome9 HC 3D / 2D Graphics

Максимальная совместно используемая
видео память составляет 256 МБ
Слоты DDR2 DIMM x 2
Поддержка DDR2 533 / 667
Каждый модуль DIMM поддерживает
256MB / 512МБ / 1ГБ / 2ГБ DDR2
Максимальная ёмкость памяти 4 ГБ
Модуль памяти с одноканальным
режимом DDR2
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM

ITE 8712F

Обеспечивает наиболее используемые
действующие функциональные
возможности Super I/O.
Интерфейс с низким количеством
выводов
Инициативы по охране окружающей
среды,
Аппаратный монитор
Регулятор скорости
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
Встроенное устройство управления
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 /

100 / 133

Поддержка режима PIO 0~4,
Встроенное последовательное
устройство управления ATA
скорость передачи данных до 1.5
гигабит/с.
Соответствие спецификации SATA версия

1.0.

hreading /

42

LGA 775
Процессор Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx до 3.8

ГГц
Поддержка технологий Hyper-Threading /

Execute Disable Bit / Enhanced Intel
SpeedStep® / Intel Architecture-64 /
Extended Memory 64 Technology
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A

Unichrome Pro IGP

Максимальная совместно используемая
видео память составляет 64 МБ
Слоты DDR2 DIMM x 2
Поддержка DDR2 533
Каждый модуль DIMM поддерживает
256MB / 512МБ / 1ГБ / 2ГБ DDR2
Максимальная ёмкость памяти 4 ГБ
Модуль памяти с одноканальным
режимом DDR2
Не поддерживает зарегистрированные
модули DIMM and ECC DIMM

ITE 8712F

Обеспечивает наиболее используемые
действующие функциональные
возможности Super I/O.
Интерфейс с низким количеством
выводов
Инициативы по охране окружающей
среды,
Аппаратный монитор
Регулятор скорости
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
Встроенное устройство управления
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 /

100 / 133

Поддержка режима PIO 0~4,
Встроенное последовательное
устройство управления ATA
скорость передачи данных до 1.5
гигабит/с.
Соответствие спецификации SATA версия

1.0.

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Локальна
я сеть

Звуковой
кодек

Слоты

Встроенн
ый разъём

Задняя
панель
средств
ввода-выв
ода

Размер
панели
Специаль
ные
техническ
ие
характери
стики

Поддержк
а OS

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (дополнительно)

Автоматическое согласование 10 / 100
Мб/с
Частичная / полная дуплексная
способность

ALC662
Звуковая поддержка High-Definition

5.1канальный звуковой выход

Слот PCI x2 Слот PCI x2
Слот PCI Express x16 x1 Слот PCI Express x16 x1
Слот PCI Express x 1 x1 Слот PCI Express x 1 x1
Разъём НГМД x1 Разъём НГМД x1
Разъём Порт подключения принтера x1 Разъём Порт подключения принтера x1
Разъём IDE x2 Разъём IDE x2
Разъём SATA x2 Разъём SATA x2
Разъём на лицевой панели x1 Разъём на лицевой панели x1
Входной звуковой разъём x1 Входной звуковой разъём x1
Разъём ввода для CD x1 Разъём ввода для CD x1
Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы x1
Открытое контактирующее
приспособление CMOS x1
USB-разъём x2 USB-разъём x2
Разъем питания (24 вывод) x1 Разъем питания (24 вывод) x1
Разъем питания (4 вывод) x1 Разъем питания (4 вывод) x1
Клавиатура PS/2 x1
Мышь PS/2 x1
Последовательный порт x1
Порт VGA x1
Порт LAN x1
USB-порт x4
Гнездо для подключения
наушников x3

190 мм (Ш) X 244 мм (В) 190 мм (Ш) X 244 мм (В)

Поддержка RAID 0 / 1 Поддержка RAID 0 / 1

Windows 2K / XP / VISTA
Biostar сохраняет за собой право

добавлять или удалять средства
обеспечения для OS с или без
предварительного уведомления.

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (дополнительно)

Автоматическое согласование 10 / 100
Мб/с
Частичная / полная дуплексная
способность

ALC662
Звуковая поддержка High-Definition

5.1канальный звуковой выход

Контактирующее приспособление
вентилятора центрального процессора x1
Контактирующее приспособление
вентилятора системы x1
Открытое контактирующее
приспособление CMOS x1

Клавиатура PS/2 x1
Мышь PS/2 x1
Последовательный порт x1
Порт VGA x1
Порт LAN x1
USB-порт x4
Гнездо для подключения
наушников x3

Windows 2K / XP
Biostar сохраняет за собой право

добавлять или удалять средства
обеспечения для OS с или без
предварительного уведомления.

43

Motherboard Manual

T

ARABIC

LGA 775

تﺎﺠﻟﺎﻌﻣIntel Core2Duo/ Pentium 4 / Pentium

D / Celeron D / Celeron 4xx ﺑددﺮﺘ ﻳ ﻰﻟإ ﻞﺼ8.3

ﺰﺗﺮه ﺎﺠﻴﺟ

تﺎﻴﻨﻘﺗ ﻢﻋﺪﺗHyper-Threading / Execute Disable

Bit / Enhanced Intel SpeedStep® /

Extended Memory 64 Technology

*It is recommended to use processors with

95W power consumption.

VIA P4M890

VIA VT8237A

Unichrome Pro IGP

ﺔآﺮﺘﺸﻤﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ64 ﺖﻳﺎﺑ ﺎﺠﻴﻣ

ﻢﻋﺪﺗ ةﺮآاﺬﻟا ﻦﻣ عﻮﻧ DDR2 تﺎﻌﺳ 533 ﺎﺠﻴﻣ ﺖﻳﺎﺑ

ﻢﻋﺪﺗ ﻞآ ﺔﺤﺘﻓ DIMM ﻢﻋﺪﺗ ةﺮآاذ ﻦﻣ عﻮﻧ DDR2 ﺔﻌﺳ 256

ﺎﺠﻴﻣ ﺖﻳﺎﺑ /512 ﺎﺠﻴﻣ ﺖﻳﺎﺑ و1 ﺎﺠﻴﺟ ﺖﻳﺎﺑ /2 ﺟﺎﺠﻴ ﺖﻳﺎﺑ

ةﺪﺣو ةﺮآاذ DDR2 ﺔﻳدﺎﺣأ ةﺎﻨﻘﻟا

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC

ITE 8712F

ﺮﻓﻮﺗ ﺔﻔﻴﻇو Super I/O ﺮﺜآﻷا ًﺎ ﻣ ا ﺪ ﺨ ﺘ ﺳ ا.

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ

Low Pin Count Interface

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE

ﻢﻜﺤﺘﻣ IDE ﻞﻣﺎﻜﺘﻣ

ﺔﻴﻨﻘﺘﺑ ﻞﻗﺎﻧUltra DMA 33 / 66 / 100 / 133

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

ﺔﻘﺑﺎﻄﻣ تﺎﻔﺻاﻮﻤﻟ SATA راﺪﺻﻹا 1.0.

تﺎﺠﻟﺎﻌﻣIntel Core2Duo/ Pentium 4 / Pentium

D / Celeron D / Celeron 4xx ﺑددﺮﺘ ﻳ ﻰﻟإ ﻞﺼ8.3

تﺎﻴﻨﻘﺗ ﻢﻋﺪﺗHyper-

*It is recommended to use processors with

hreading / Execute Disable

Bit / Enhanced Intel SpeedStep® /

Extended Memory 64 Technology

95W power consumption.

ددﺮﺗ 533 / 800 / 1066 ﺰﺗﺮه ﺎﺠﻴﻣ ددﺮﺗ 533 / 800 / 1066 ﺰﺗﺮه ﺎﺠﻴﻣ

VIA P4M900

VIA VT8237A

Chrome9 HC 3D / 2D Graphics

ﺔآﺮﺘﺸﻤﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ256 ﺖﻳﺎﺑ ﺎﺠﻴﻣ

ﺔﺤﺘﻓDDR2 DIMM دﺪﻋ2

ﻢﻋﺪﺗ ةﺮآاﺬﻟا ﻦﻣ عﻮﻧ DDR2 تﺎﻌﺳ 533 / 667 ﺎﺠﻴﻣ ﺖﻳﺎﺑ

ﻢﻋﺪﺗ ﻞآ ﺔﺤﺘﻓ DIMM ﻢﻋﺪﺗ ةﺮآاذ ﻦﻣ عﻮﻧ DDR2 ﺔﻌﺳ 256

ﺎﺠﻴﻣ ﺖﻳﺎﺑ /512 ﺎﺠﻴﻣ ﺖﻳﺎﺑ و1 ﺎﺠﻴﺟ ﺖﻳﺎﺑ /2 ﺎﺠﻴﺟ ﺖﻳﺎﺑ

ﺔﻌﺳ ةﺮآاذ ىﻮﺼﻗ 4 ﺎﺠﻴﺟ ﺖﻳﺎﺑ

ةﺪﺣو ةﺮآاذ DDR2 ﺔﻳدﺎﺣأ ةﺎﻨﻘﻟا

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC

ﺮﻓﻮﺗ ﺔﻔﻴﻇو Super I/O ﺮﺜآﻷا ًﺎ ﻣ ا ﺪ ﺨ ﺘ ﺳ ا.

ﺗﻢﻋﺪ ﺔﻴﻨﻘﺗ

Low Pin Count Interface

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻣ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺟﻷا

ﺐﻗاﺮﻣ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE

ﻢﻜﺤﺘﻣ IDE ﻞﻣﺎﻜﺘﻣ

ﺔﻴﻨﻘﺘﺑ ﻞﻗﺎﻧUltra DMA 33 / 66 / 100 / 133

ﻊﺿو ﻲﺴﻴﺋر

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻢﻜﺤﺘﻣ Serial ATA ﻞﻣﺎﻜﺘﻣ

ﻞﻘﻧ تﺎﻧﺎﻴﺒﻟا تﺎﻋﺮﺴﺑ ﻞﺼﺗ ﻰﻟإ1.5 ﺖﺑﺎﺠﻴﺟ/ﺔﻴﻧﺎﺛ.

ﺔﻘﺑﺎﻄﻣ تﺎﻔﺻاﻮﻤﻟ SATA راﺪﺻﻹا 1.0.

P4M900-M7 SE P4M890-M7 TE

LGA 775

ﺰﺗﺮه ﺎﺠﻴﺟ

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔﻳﺰآﺮﻤﻟا

ﻟاﻞﻗﺎﻨ ﻲﻣﺎﻣﻷا

ﻲﺒﻧﺎﺠﻟا

ﺔﻋﻮﻤﺠﻣ ﺢﺋاﺮﺸﻟا

تﺎﻣﻮﺳﺮﻟا ﺔﻗﺎﻄﺑ

ﺔﺤﺘﻓDDR2 DIMM دﺪﻋ2

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

ﺔﻌﺳ ةﺮآاذ ﻗىﻮﺼ 4 ﺎﺠﻴﺟ ﺖﻳﺎﺑ

ITE 8712F

Super I/O

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻣ ﺔﻓﺮﻌﻤﻟ ﺣﺔﻟﺎ ةﺰﻬﺟﻷا

ﺐﻗاﺮﻣ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا

ﻊﺿو ﻲﺴﻴﺋر

ﻞﻘﻧ تﺎﻧﺎﻴﺒﻟا تﺎﻋﺮﺴﺑ ﻞﺼﺗ ﻰﻟإ1.5 ﺖﺑﺎﺠﻴﺟ/ﺎﺛﺔﻴﻧ.

ﻔﻨﻣﺬ IDE

SATA

ﺔﻜﺒﺷ ﺔﻴﻠﺧاد Realtek RTL 8201CL PHY/ Realtek RTL 8201CL PHY/

44

ﻆﻔﺘﺤﺗ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻧ ﻞﻴﻐﺸﺗ

Atheros AR8012 PHY )يرﺎﻴﺘﺧا(

ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ10/100 ﺖﻳﺎﺑ ﺎﺠﻴﻣ /ﺔﻴﻧﺎﺛ

ﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻧﺎﻜﻣإ/ﻲﻔﺼﻨﻟا

ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗ ﻦﻣ ﻒﻳﺮﻌﺘﻟا

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺷ

تﻮﺻ ﺲﺒﻘﻣ دﺪﻋ3

Windows 2K / XP

ALC662

5.1تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ

ﻔﻣ ﺔﺣﻮﻟ ﺢﻴﺗﺎPS/2 دﺪﻋ1

سوﺎﻣ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻔﻨﻣVGA دﺪﻋ1
ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻓﺎﻨﻣUSB دﺪﻋ4

رﺎﻄﺧﺈﺑ وأ نوﺪﺑ رﺎﻄﺧإ.

ﻆﻔﺘﺤﺗ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻧ ﻞﻴﻐﺸﺗ

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Atheros AR8012 PHY )يرﺎﻴﺘﺧا(

ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ10/100 ﺖﻳﺎﺑ ﺎﺠﻴﻣ /ﺔﻴﻧﺎﺛ

ا ﺔﻴﻧﺎﻜﻣإﻞﻣﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟ/ﻲﻔﺼﻨﻟا

ALC662

ﻦﻣ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗ

5.1تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ

ﺔﺤﺘﻓPCI دﺪﻋ2 ﺔﺤﺘﻓPCI دﺪﻋ2
ﺔﺤﺘﻓx16 PCI Express دﺪﻋ1 ﺔﺤﺘﻓx16 PCI Express دﺪﻋ1
ﺔﺤﺘﻓPCI Express x 1 دﺪﻋ1 ﺔﺤﺘﻓPCI Express x 1 دﺪﻋ1

ﺔﻧﺮﻣ صاﺮﻗأ كﺮﺤﻣ ﺬﻔﻨﻣ دﺪﻋ1 ﺔﻧﺮﻣ صاﺮﻗأ كﺮﺤﻣ ﺬﻔﻨﻣ ﻋ دﺪ1

ﺔﻌﺑﺎﻃ ﺬﻔﻨﻣ دﺪﻋ1 ﺔﻌﺑﺎﻃ ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻔﻨﻣIDE دﺪﻋ2 ﺬﻔﻨﻣIDE دﺪﻋ2
ﺬﻔﻨﻣSATA دﺪﻋ2 ﺬﻔﻨﻣSATA دﺪﻋ2

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1 ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1 ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻔﻨﻣCD-IN دﺪﻋ1 ﺬﻔﻨﻣCD-IN دﺪﻋ1
ﻠﺻوﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻣ ﺔ دﺪﻋ1 ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻣ ﺔﻠﺻو دﺪﻋ1

مﺎﻈﻨﻟا ﺔﺣوﺮﻣ ﺔﻠﺻو دﺪﻋ1 مﺎﻈﻨﻟا ﺔﺣوﺮﻣ ﺔﻠﺻو دﺪﻋ1

ﺢﺴﻣ ﺔﻠﺻوCMOS دﺪﻋ1 ﺢﺴﻣ ﺔﻠﺻوCMOS دﺪﻋ1

ﺬﻔﻨﻣUSB دﺪﻋ2 ﺬﻔﻨﻣUSB دﺪﻋ2
ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ)24سﻮﺑد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ)24سﻮﺑد( دﺪﻋ1
ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ)4ﺲﻴﺑﺎﺑد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ)4ﺲﻴﺑﺎﺑد( دﺪﻋ1

ﺢﻴﺗﺎﻔﻣ ﺔﺣﻮﻟPS/2 دﺪﻋ1

سوﺎﻣ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻔﻨﻣVGA دﺪﻋ1

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺷ ﺬﻔﻨﻣ دﺪﻋ1

ﺬﻓﺎﻨﻣUSB دﺪﻋ4

تﻮﺻ ﺲﺒﻘﻣ دﺪﻋ3

Windows 2K / XP / VISTA

رﺎﻄﺧﺈﺑ وأ نوﺪﺑ رﺎﻄﺧإ.

ﻚﻳدﻮآ تﻮﺼﻟا

تﺎﺤﺘﻔﻟا

ﺬﻓﺎﻨﻤﻟا ﻰﻠﻋ ﺢﻄﺳ

ﺔﺣﻮﻠﻟا

ﺬﻓﺎﻨﻣ ﻞﺧد/جﺮﺧ

ﺔﺣﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

ﻢﺠﺣ ﺔﺣﻮﻠﻟا 190 ﻢﻣ)ضﺮﻋ (X 244 ﻢﻣ)عﺎﻔﺗرا( 190 ﻢﻣ)ضﺮﻋ (X 244 ﻢﻣ)عﺎﻔﺗرا(

ﺎﻳاﺰﻣ ﺔﺻﺎﺧ ﻢﻋﺪﺗ ﺔﻴﻨﻘﺗ RAID 0 / 1 ﻢﻋﺪﺗ ﺔﻴﻨﻘﺗ RAID 0 / 1

ﻢﻋد ﺔﻤﻈﻧأ ﻞﻴﻐﺸﺘﻟا

45

Motherboard Manual

JAPANESE

P4M900-M7 SE P4M890-M7 TE

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx processor up to 3.8
GHz

CPU

FSB 533 / 800 / 1066 MHz 533 / 800 / 1066 MHz

チップセット VIA P4M900

グラフィッ
クス

メインメモ
リ

Super I/O

IDE

SATA

Hyper-Threading / Execute Disable Bit /
Enhanced Intel SpeedStep® / Intel
Architecture-64 / Extended Memory 64
Technology をサポートします
*It is recommended to use processors with
95W power consumption.

VIA VT8237A

Chrome9 HC 3D / 2D Graphics
最大の共有ビデオメモリは256MBです

DDR2 DIMMスロット x 2
DDR2 533 / 667をサポート

各DIMMは 256/512MB/1GB/2GB DDR2をサ
ポート
最大メモリ容量4GB
シングル チャンネルモードDDR2メモリモジュ
ール
登録済みDIMMとECC DIMMはサポートされま
せん

ITE 8712F

もっとも一般に使用されるレガシーSuper I/O
機能を採用しています。
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
H/Wモニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能

統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド
PIO Mode 0~4のサポート、

統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度

SATAバージョン1.0仕様に準拠。

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx processor up to 3.8
GHz
Hyper-Threading / Execute Disable Bit /
Enhanced Intel SpeedStep® / Intel
Architecture-64 / Extended Memory 64
Technology をサポートします
*It is recommended to use processors with
95W power consumption.

VIA P4M890
VIA VT8237A

Unichrome Pro IGP
最大の共有ビデオメモリは64MBです

DDR2 DIMMスロット x 2
DDR2 533をサポート

各DIMMは 256/512MB/1GB/2GB DDR2をサ
ポート
最大メモリ容量4GB
シングル チャンネルモードDDR2メモリモジュ
ール
登録済みDIMMとECC DIMMはサポートされま
せん

ITE 8712F

もっとも一般に使用されるレガシーSuper I/O
機能を採用しています。
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
H/Wモニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能

統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド
PIO Mode 0~4のサポート、

統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度
SATAバージョン1.0仕様に準拠。

46

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Realtek RTL 8201CL PHY/

LAN PHY

サウンド

Codec

スロット

オンボード
コネクタ

背面パネル

I/O

ボードサイ
ズ

特殊機能 RAID 0 / 1のサポート RAID 0 / 1のサポート

OSサポー
ト

Atheros AR8012 PHY (オプション)
10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能

ALC662
ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

PCIスロット x2 PCIスロット x2

PCI Express x16スロット x1 PCI Express x16スロット x1

PCI Express x 1スロット x1 PCI Express x 1スロット x1

フロッピーコネクタ x1 フロッピーコネクタ x1
プリンタポートコネクタ x1 プリンタポートコネクタ x1

IDEコネクタ x2 IDEコネクタ x2
SATAコネクタ x2 SATAコネクタ x2

フロントパネルコネクタ x1 フロントパネルコネクタ x1
フロントオーディオコネクタ x1 フロントオーディオコネクタ x1

CDインコネクタ x1 CDインコネクタ x1
CPUファンヘッダ x1 CPUファンヘッダ x1
システムファンヘッダ x1 システムファンヘッダ x1
CMOSクリアヘッダ x1 CMOSクリアヘッダ x1
USBコネクタ x2 USBコネクタ x2

電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1
電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1

PS/2キーボード x1
PS/2マウス x1
シリアルポート x1
VGAポート x1
LANポート x1
USBポート x4
オーディオジャック x3

190 mm (幅) X 244 mm (高さ) 190 mm (幅) X 244 mm (高さ)

Windows 2K / XP / VISTA
Biostarは事前のサポートなしにOSサポートを
追加または削除する権利を留保します。

Realtek RTL 8201CL PHY/
Atheros AR8012 PHY (オプション)
10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能

ALC662
ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

PS/2キーボード x1
PS/2マウス x1
シリアルポート x1
VGAポート x1
LANポート x1
USBポート x4
オーディオジャック x3

Windows 2K / XP
Biostarは事前のサポートなしにOSサポートを
追加または削除する権利を留保します。

2007/06/11

47