Biostar P4M890-M7 TE, P4M900-M7 SE Owner's Manual

P 4M 900-M7 S E / P4M 890-M7 TE

Setup Manual

FCC Inf or m at ion and Copyri ght

This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. T hese limits are designed
to p rovid e reasonable protection against harmful interfe rence in a res idential
installation. This equipment generates, uses, and c an radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interfe rence will not oc cur in a particular ins tallatio n.

The vendo r makes no repres entations o r warra nties with respec t to the
contents here and specially disclaims any implied warranties of merchantability

o r fi tness fo r a ny p u rp ose . Furthe r the ve ndo r res e rves the ri g ht to rev is e this
publication and to make c hanges to the c ontents here without obligation to
notify any party beforehand.

D uplica tion o f this publicat ion, in p art o r in wh ole, is not al lowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be respo nsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respec tive companies.

Table of Contents

Chapt er 1: Introdu ct ion .............................................3

1.1 Before You Start................................................................... 3

1.2 Package Checklist................................................................3

1.3 Motherboard Features..........................................................4

1.4 Rear Panel C onnectors..........................................................5

1.5 Mo t he r bo ar d Layou t............................................................ 6

Chapt er 2: Hardware Installation..............................7

2.1 Installing Ce ntral Proce ssing Unit (CPU) ................................ 7

2.2 Fan He ade rs.........................................................................9

2.3 Installing System Memo ry.....................................................10

2.4 Con nectors and Slo ts............................................................11

Chapt er 3: Headers & Jumpers Setup .....................13

3.1 How to Setup Jum per s..........................................................13

3.2 Det ail Settin gs.....................................................................13

Chapt er 4: RAID Functions.......................................18

4.1 Operation System................................................................18

4.2 Raid Array s.........................................................................18

4.3 How RA I D Wo r k s.................................................................18

Chapt er 5: Useful Help .............................................20

5.1 Dr i ver Insta llat ion Note.......................................................20

5.2 Award BIOS Beep Code........................................................21

5.3 Extra Informati on ................................................................21

5.4 Troubleshooting...................................................................22

Chapt er 6: WarpSpeeder™ I II .................................23

6.1 Introduction ........................................................................23

6.2 System Requirement............................................................23

6.3 Installation.........................................................................24

6.4 WarpSpeede r™ III................................................................25

Appendencies: SPEC In Other Language ................30

German................................................................................................30

France..................................................................................................32

Italian..................................................................................................34

Spanish ................................................................................................36

Portuguese ...........................................................................................38

Polish...................................................................................................40

Russian ................................................................................................42

Arabic..................................................................................................44

Japanese..............................................................................................46

CHAPTER 1: INTRODUCTION

P4M900-M7 SE/P4M890-M7 TE

1.1 B

EFORE YOU START

Tha nk you for choosing our product. Be fore you start installing the
mothe rboa rd, plea se make sure you fo llo w the instructio ns be lo w:

 Prepare a dry and s table working environment with

s ufficie nt ligh ting.

 Always disconnect the computer from power outlet

be fo re ope ra tion .

 Befo re you take the mo the rboa rd ou t f rom a nti-s ta t ic

bag, ground yourself properly by touching any safely
grounde d appliance, or use gro unded wrist strap to
remove the static charge.

 Avo id tou ch ing the compone nts o n m o the rboa rd o r the

rea r side of the board unless ne cessary. Ho ld the board
on the edge , do not try to be nd or flex the board.

 Do no t lea ve an y un fas tene d small pa rts inside the

case after installation. Loose parts will cause short
circuits which ma y damage the equipment.

 Keep the computer from dangerous area, such as heat

source , humid air and wate r.

1.2 PACKAGE CHECKLIST

HDD Cable X 1
I nstalla tion Guide X 1
Fully Se tup Drive r CD X 1 ( full ve rsion manual files ins ide )

Rear I/O Panel for ATX Case X 1
FDD Cable X 1 (optional)
Se ria l ATA Cab le X 1 (optiona l)
USB 2.0 Cable X1 (optional)
Se ria l ATA Po wer C able X 1 (o ptiona l)

Note: The package contents may differ by area or your motherboard version.

3

Motherboard Manual

/

p

/

p

1.3 MOTHERBOARD FEATURES

P4M900-M7 SE P4M890-M7 TE

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx pr ocessor up to 3.8
GHz

CPU

FS B 533 / 800 / 106 6 MHz 533 / 800 / 106 6 MHz

Chipset

Graphic

Super I/O

Main
Memory

IDE

SATA

LAN PHY

Sound
Codec

Supports Hyper Threading
Bit / Enhanced Intel S peedStep®/ Intel
Extended Memor y 64 technology
*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A
Chr ome9 HC 3D / 2D Gr ap hic s
Max Shared Vide o Memory is 256 MB

ITE 871 2F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin C ount Interf ace
Environment Control initiatives,
H/W Monitor
Fan S pee d Co ntroller
ITE' s "Smart Guardian" func tion
DIMM Slots x 2
Supports D DR2 533 / 667
Eac h DIMM supports 2 56/ 512MB/1GB/ 2GB
DDR2
Max Memory C apicity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported

Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mo de 0~4,
Integrated Seri al ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification compliant.

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (Optional)
10 / 100 Mb/s auto negotiation
Half / Full du plex capability
AL C662

5.1 cha nnels a udio out
High- Defi nition Au dio s upport

Execute Disable

rocessors with

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Celeron 4xx pr ocessor up to 3.8
GHz
Supports Hyper Threading
Bit / Enhanced Intel S peedStep®/ Intel
Extended Memor y 64 technology
*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A
Unichrome Pr o IGP
Max Shared Vide o Memory is 64 MB

ITE 871 2F
Provides the most commonly used legacy
Super I/O functionality.
Low Pin C ount Interf ace
Environment Control initiatives,
H/W Monitor
Fan S pee d Co ntroller
ITE' s "Smart Guardian" func tion
DIMM Slots x 2
Suppor ts DDR2 533
Eac h DIMM supports 2 56/ 512MB/1GB/ 2GB
DDR2
Max Memory C apicity 4GB
Single Channel Mode DDR2 memory
module
Registered DIMM and ECC DIMM is not
supported

Integrated IDE Controller
Ultra DMA 33~133 Bus Master Mode
supports PIO Mo de 0~4,
Integrated Seri al ATA Controller
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification compliant.

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (Optional)
10 / 100 Mb/s auto negotiation
Half / Full du plex capability
AL C662

5.1 cha nnels a udio out
High- Defi nition Au dio s upport

Execute Disable

rocessors with

4

P4M900-M7 SE/P4M890-M7 TE

g

g

P4M900-M7 SE P4M890-M7 TE

PCI Express x 16 slot x1 PCI Express x 16 slot x1
PCI Express x 1 slot x1 PCI Express x 1 slot x1 Slots
PCI s lot x2 PCI slot x2

Floppy connector x1 Floppy connector x1
Printer Port Conn ector x1 Printer Port Connector x1

IDE C onnector x2 IDE C o nnector x2
SATA Connector x2 SATA Connector x2
Front Pa nel C o nnector x1 Front Pa nel C onnector x1

On Board
Connector

Back Panel
I/O

Board S iz e 190 mm (W) x 244 mm (L) 190 mm (W) x 244 mm (L)

Special
Feature

OS
Suppor t

Front Audi o Co nnector x1 Front A udio Connect or x1
CD-in Co nnector x1 CD-in Connect or x1
CPU Fan header x1 CPU Fan hea der x1
Syst em Fan hea der x1 Syst em Fan hea der x1
Clear CMOS header x1 Clear CMOS header x1
USB connector x2 USB connector x2
Power Connector (24pi n) x1 Power Connector (24pi n) x1
Power Connector (4pin) x1 Power Connector (4pin) x1

PS/2 Keyb oard x1
PS/2 Mo use x1
Serial Port x1
VGA Port x1
LAN port x1
USB Port x4
Audio Jack x3

RAID 0 / 1 support RAID 0 / 1 support

Windows 2000 / XP / VISTA
Biostar Reserves the ri
support for any OS with or witho ut notice.

ht t o add or r emo ve

PS/2 Keyb oard x1
PS/2 Mo use x1
Serial Port x1
VGA Port x1
LAN port x1
USB Port x4
Audio Jack x3

Windows 2000 / XP
Biostar Reserves the ri
support for any OS with or witho ut notice.

1.4 REAR PANEL CONNECTORS

PS/2
Mouse

LA N

ht t o add or r emove

Li ne I n /
Surround

Line O ut

Mic In 1/
Bass/ Center

PS/2
Keyboard

COM1 VGA

USBX2USBX2

Since t he audi o c hip s uppor ts Hig h Definiti on Audi o Speci fic ati on, the func tion of eac h audi o
jack c an be defi ne d by sof twar e. T he in put / output func tion o f eac h audi o jac k l is ted above

represents t he default s etti ng . Ho we ver , wh en c onnec ti ng e xter nal micr ophon e to t he audi o
port, pleas e us e t he Lin e In ( blu e) an d Mi c In (Pi nk) audio j ac k.

5

Motherboard Manual

1.5 MOTHERBOARD LAYOUT

JKBMS1

C
O

J

M

C

1

O
M

1

JVGA1

JPRNT1

JU SB1

JUSBLAN1

JAUDIO1

JATXPWR2

LAN

LGA775

CPU 1

P4M900

or

P4M890

DIMM1

DIMM2

JCFAN1

JATXPWR1

IDE1

IDE2

6

Super

I/O

JCDIN1

Codec

Note: represents the 1■

JA UDIO F1

PCI -EX1 _1

PCI -E X16

BAT1

PCI1

PCI2

st

pin.

JU SB 2

JUSB3

FDD1

BI OS

VIA

VT8237A

JCMOS1

J P AN EL 1

JSATA2

JSATA1

JSFAN1

P4M900-M7 SE/P4M890-M7 TE

CHAPTER 2: HARDW ARE INSTALLATION

2.1 INSTALLI NG CENTRAL PROCESSI NG UNIT (CPU)

Special Notice:

Remo v e Pin Cap before installation, and ma ke goo d preservation
for future use. When the CPU is remo ved, cov er the Pin Cap on the
empty so cket to ensure pin legs won’ t be damag ed.

Pin Cap

Step 1: Pull the socket locking lever out from the socket and then raise

the lever up to a 90-degree angle.

7

Motherboard Manual

Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.

Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.

8

P4M900-M7 SE/P4M890-M7 TE

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to
pin#1.

JCFAN1: CPU Fa n Header

Pin

14

JSF AN1 : Sy stem F an H eader

Assignment

1 Ground
2 +12V
3 FAN RPM rate

sense

4 Smart Fan

Control

Pin

Assignment

1 Ground
2 +12V

3 FAN RPM rate

sense

13

Note:

The J SFAN1 supports 3-pin head c onnect or a nd the JCFAN1 su pports 4-pin head
conn ector . Wh en connecti ng with wires on to c onnec t ors, pl ease n ote th at t he r ed wire i s

the positi ve and s ho uld be c onnect ed to pi n#2, an d th e blac k wire i s Groun d and s ho uld
be c onnect ed t o GND .

9

Motherboard Manual

2.3 INSTALLING SYSTEM MEMORY

A. Me mo ry Modu le s

DIM M1

DIM M2

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.

B. Memory Capacity

10

DI MM Socket

Location

DIMM1 256MB/512MB/ 1GB/2GB

DIMM2 256MB/512MB/ 1GB/2GB

DDR Module

To tal M e m o r y

Size

Max is 4GB.

P4M900-M7 SE/P4M890-M7 TE

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Conne c tor

The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector s upports t he
prov ided f loppy driv e ribbon cable.

IDE1/IDE2 : Hard Disk Connec tors

The motherboard has a 32-bit Enhanced PCI ID E Controller that prov ides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unc tionality. It has two

HDD connectors: IDE1 (primary ) and ID E2 (secondary).
The IDE connectors can connect a master and a slav e driv e, so you can

connect up to four hard disk drives. The f irs t hard drive should always be
connected to IDE1.

2

1

3940

21

34

33

IDE2IDE1

11

Motherboard Manual

PCI-EX16: PCI-Expr es s x1 6 S lot

- PCI-Express 1.0a compliant.

- Maximum theoret ical realized bandwidth of 4GB/s sim ultaneously per

direction, f or an aggregate of 8GB/ s totally.

PCI-EX1_1: PCI-Express x1 Sl ot

- PCI-Express 1.0a compliant.

- Data transf er bandwidth up t o 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rat e of 2.5Gb/s on the data pins.

- 2X bandwidth ov er the traditional PCI archit ecture.

PCI-EX16

PCI-EX1_1

PCI1/PC I2: Peri phe ral Compo nent Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus standard for expansion

cards. This PCI slot is designated as 32 bits.

12

PCI1

PCI2

P4M900-M7 SE/P4M890-M7 TE

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SET UP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SETT INGS

JPANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button and speaker connection. It allows user to c onnect the PC cas e’s f ront

panel switch functions.

PWR_LED

SLP

9
18

SPK

++

+

On /O ff

-

-

RS T

16

HL E D

Pin Assignment Function Pin Assignment Function

1 +5V 9 Sleep control
2 N/A 10 Ground

3 N/A 11 N/A N/A
4 Speaker
5 HDD LED (+) 13 P ower LED (+)
6 HDD LED (-)

7 Ground 15 Power button
8 Reset control

Speaker
Connector

Hard drive
LED

Reset button

12 P owe r LED (+)

14 P owe r LED (-)

16 Ground

Sleep button

Power LED

Power-on button

13

Motherboard Manual

ATX Power So urce Connect or: JATXPWR1

JATXPWR1 allows user to connect 24-pin power connector on the ATX power
supply.

12

1

Pin Assignment Pin Assignment

24

13

13 +3.3V 1 + 3.3V
14 -12V 2 + 3.3V
15 Gr ound 3 Gr oun d
16 PS_ON 4 + 5V
17 Gr ound 5 Gr oun d
18 Gr ound 6 + 5V
19 Gr ound 7 Gr oun d
20 NC 8 PW_ OK
21 +5V 9 Standb y Vol t age+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Gr ound 12 +3.3V

JATXPWR 2: AT X Powe r Source Conne ctor

By connecting this connector, it will provide +12V to CPU power circuit.

Pin

1

23

4

Assignment

1 +12V
2 +12V
3 Ground
4 Ground

14

P4M900-M7 SE/P4M890-M7 TE

JUSB2/JUSB3: Headers for USB 2.0 Ports at Fron t Panel

This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.

Assignment

Pin

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground

210

19

JUSB2

JUSB3

8 Ground
9 Key

10 NC

JSATA1/JS ATA2: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace,
it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.

Pin

JSATA2

147

14 7

Assignment

1 Ground
2 TX +
3 TX ­4 Ground
5 RX­6 RX+
7 Ground

J SATA 1

JAUDIOF1 : Fron t Panel Au dio Header

This header allows user to connect the front audio output cable with the PC front
panel. It will disable the output on back panel audio connectors.

Pin Assignment

1 Mic Left in
2 Ground
3 Mic Right i n
4 GPIO
5 Right line i n
6 Jack Sense
7 Front Sens e

210

19

8 Key
9 Left l ine in

10 Jack Sense

15

Motherboard Manual

JCDIN1: CD-R OM A ud io-in Con nector

This connector allows user to connect the audio source f rom t he v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound c ard, PCI TV turner card etc.

JCMOS 1 : C l ea r CMOS Hea der

By placing the jumper on pin2-3, it allows user to restore the BIOS saf e set ting
and the CMOS data, please carefully f ollow the procedures to avoid damaging

the motherboard.

Assignment

Pin

1 Left Channel Input
2 Ground
3 Ground
4 Right Channel Input

14

13

Pin 1-2 Close:

Normal Operation (default).

16

1

13

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remov e AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for f ive seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset y our desired password or clear the CMOS data.

3

JPRNT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7

5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy
9 Data 3 22 Ground

10 Ground 23 PE

11 Data 4 24 Ground

12 Ground 25 SC LT
13 Data 5 26 Key

P4M900-M7 SE/P4M890-M7 TE

25

1

2

17

Motherboard Manual

CHAPTER 4: RAID FUNCTIONS

4.1 OPERA TIO N SYSTEM

z Supports Windows XP Home/Prof es sional Edition, and Windows 2000 Prof essional.

4.2 RAID ARRAYS

RAID supports the following ty pes of RAID arrays:

RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for

RAID 1: RAID 1 defines t echni ques for mirrori ng data.

many applications.

4.3 HOW RAID WORKS

RAID 0:

The controller “ stripes ” data across multipl e drives in a RAID 0 array sy stem. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parall el. The size of each blo ck is determined by the stripe size parameter,

which you set during the creation of the RAID set based on the system environment. This
technique redu ces overall disk access time and offers high b andwidth.

Fea tures and Be nefits

 Drives: Minimum 1, and maximum is up to 6 or 8. Depending on the

platform.

 Uses: Intended for non-critical data requiring high dat a throughput, or any

env ironment that does not require f ault tolerance.

 Benefits: prov ides inc reased data throughput, especially f or large files. No

capacity loss penalty f or parity.

 Drawbacks: Does not deliver any f ault tolerance. If any drive in t he array

f ails, all data is lost.

 Fault Tolerance: No.

18

Block 1

Block 3
Block 5

Block 2
Block 4

Block 6

P4M900-M7 SE/P4M890-M7 TE

RAID 1:

Every read and w rite is actually carried out in parallel across 2 disk driv es in a RAID 1
array system. The mirrored (backup) copy of th e data can reside on the same disk or on a

second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or d rive is corrup ted or becomes un availabl e because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
me d i a .

Fea tures and Be nefits

 Drives: Minimum 2, and maximum is 2.
 Uses: RAID 1 is ideal for small dat abases or any other applicat ion that

requires f ault tolerance and minimal c apacity.

 Benefits: Prov ides 100% data redundancy. Should one drive f ail, the

controller switches to the other drive.

 Drawbacks: Requires 2 drives for t he storage space of one drive.

Perf ormance is impaired during driv e rebuilds.

 Fault Tolerance: Yes.

Block 1
Block 2

Block 3

Block 1

Block 2
Block 3

19

Motherboard Manual

CHAPTER 5: USEFUL HE LP

5.1 DRIVER INSTALLATION NOTE

After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system

performance.

You will see the following window after you insert the CD

The setup guid e will auto dete ct your motherboa rd and operating system.

Note:

If this windo w didn’ t show up af t er you ins ert th e Driv er CD, ple ase use fi le bro ws er to
locate an d e xecu te th e fi le SETUP.E XE under yo ur optical dri ve.

A. Driver Insta ll ation

To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title

to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Pleas e download the latest version
of Acrobat Reader soft ware fro m

http://www.adobe.com/products/acrobat /readstep2.html

20

P4M900-M7 SE/P4M890-M7 TE

5.2 AWARD BIOS BEEP CODE

Beep Sound Meanin g

One long beep followed by two short
beeps

High-low siren sound CPU overheated

One Short beep when system boot-up No error found during POST

Long beeps every other second No DRAM detected or ins tall

Video card not found or v ideo card
memory bad

System will shut down automatically

5.3 EXT RA INFORMATION

CPU Overheated

If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not

power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection
function.

1. Remove the power cord from power supply for seconds.
2 . Wa i t fo r se c o nds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2 . Wa i t fo r se c o nds.

3. Po we r on the syste m again.

21

Motherboard Manual

e

5.4 TROUBLESHOOTING

Probable Solution

1. No power to the system at all
Power light don’t illuminate, f an
inside power supply does not turn

on.

2. Indicator light on key board does
not turn on.

System inoperativ e. Key board lights
are on, power indicator lights are lit,

and hard driv e is spinning.

System does not boot from hard disk
driv e, can be booted f rom optical driv e.

System only boots f rom optical driv e.
Hard disk can be read and applications
can be used but booting from hard disk

is impossible.

Screen message says “Invalid
Configuration” or “CMOS F ailure.”

Cannot boot system after inst alling
second hard driv e.

1. Make sure power cable is
securely plugged in.

2. Replace cable.

3. Cont act technical s upport.

Using even pressure on bot h ends of
the DIMM, press down firmly until the

module snaps into place.

1. Check cable running from disk to
disk controller board. Make sure

both ends are securely plugged
in; c hec k t h e d r iv e ty p e in t he
standard CMOS setup.

2. Backing up the hard driv e is
extremely important. All hard

disks are capable of breaking
down at any time.

1. Back up data and applic ations
files.

2. Ref ormat the hard drive.
Re-install applications and data

using backup disks.

Review system ’s equipment. Make sur
correct inf ormation is in setup.

1. Set master/slave jumpers
correctly.

2. Run SETUP program and select
correct driv e ty pes. Call the drive

manufacturers f or com patibility
with other drives.

22

P4M900-M7 SE/P4M890-M7 TE

CHAPTER 6: WARPSPEEDE R™ III

6.1 INTRODUCTION

[WarpSpeeder™ III], a new powerful control utility, features three
user-friendly functions including Overclock Manager, Overvoltage

Manager, and Hardware Monitor.
With the Overclock Manager, users can easily adjust the frequency they

prefer or they can get the best CPU performance with just one click. The
Overvoltage Manager, on the other hand, helps to power up CPU core

voltage and Memory voltage. The cool Hardware Monitor smartly indicates
the temperatures, voltage and CPU fan speed as well as the chipset

information. Also, in the About panel, you can get detail descriptions about
BIOS model and chipsets. In addition, the frequency status of CPU,

memory, VGA and PCI along with the CPU speed are synchronically
shown on our main panel.

Moreover, to protect users' computer systems if the setting is not
appropriate when testing and results in system fail or hang,

[WarpSpeeder™ III] technology assures the system stability by
automatically rebooting the computer and then restart to a speed that is

either the original system speed or a suitable one.

6.2 S

YSTEM REQUI REMENT

OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP
DirectX: DirectX 8.1 or above. (The Windows XP operating system

includes DirectX 8.1. If you use Windows XP, you do not need to install
DirectX 8.1.)

23

Motherboard Manual

6.3 INSTALLATION

1. Execute the setup execution file, and then the following dialog will pop
up. Please click “Next” button and follow the default procedure to

install.

2. When you see the following dialog in setup procedure, it means setup
is completed. Click “Finish” button.

24

Usage :

The following figures are only for reference, the screen printed in this
user manual will change according to your motherboard on hand.

P4M900-M7 SE/P4M890-M7 TE

6.4 WARPSPEEDER™ III

1. Desktop Icon:

After the [WarpSpeeder™ III] has been installed, a [WarpSpeeder™ III]
icon will appear on the desktop, just like the icon shown below.

Now you can launch the [WarpSpeeder™ III] utility simply by
double-clicking the desktop icon.

2. Main Panel

If you double-click the desktop icon, [WarpSpeeder™ III] will be
launched. Please refer to the following figure; the utility’s first window

yo u will see i s Ma in Panel.

Main Pane l contains features as foll ows:

a. Display the CPU Speed, CPU external clock, Memory clock, VGA

clock, and PCI clock information.

b. Contains About, Voltage/Overclock, and Hardware Monitor

Buttons for invoking respective panels. The On/Off button is for
closing the program.

25

Motherboard Manual

3. Over clock/Over voltage Panel

Click the Overclock/Overvoltage button in the Main Panel, the button
will be highlighted and the Overclock/Overvoltage Panel will show

up as the following figure. As you can see, the Overclock Panel is
on the right side, and the Overvoltage Panel is on the left side.

26

P4M900-M7 SE/P4M890-M7 TE

Overclock Panel cont ains these features :

a. “Auto-Overclock”:

User can click thi s button and [Wa rpSpee der™ III] will set the be st
and stable performance and frequency automatically. A warning

dialog as below will show up to notify you that the system may
become unstable, click on “OK” to proceed.

Then [WarpS peede r™ III] uti lity will exe cute a series of testi ng
un til system fail . T hen system will do fail-sa fe reboot by using

Watchdog function. After reboot, launch the [WarpSpeeder™ III]
utility again and the utility will load the previously verified best and

stable frequency.

b. “Verify”:

If you use the “Manual Adjust” bar to adjust the CPU frequency,
then you can click this button and [WarpSpeeder™ III] will proceed

a testing for current frequency. If the testing is ok, then the current
frequency will be saved into system registry. If the testing fails,

system will do a fail-safe re bootin g. After reboot, the
[WarpSpeeder™ III] utility will restore to the hardware default

setting.

Warning:

Manually overclock is potentially dangerous, especially when the
ov erclocking percentage is over 110 %. W e strongly recommend you

v erify ev ery speed you overcloc k by click the Verify button. Or, you can
just click Auto ov erc lock button and let [WarpSpeeder™ III]
automatically gets t he best result f or y ou.

c. “V3 Engine”/“V6 Engine”/“V9 Engine”:

Provide user the ability to do real-time overclock adjustment.

d. “Recovery”:

Click this button and the [WarpSpeeder™ III] utility will restore all
values to the hardware default setting.

27

Motherboard Manual

Overvolta ge Pa n el contains th ese fe atures:

a. “CPU Voltage”:

This function allows user to adjust CPU voltage. Click on “+” to
increase or “-“ to decrease the CPU voltage.

b. “Memory Voltage”:

This function allows user to adjust Memory voltage. Click on “+”
to i ncrease or “-“ to decrease the Memory vo ltage.

4. Hardware Monitor Panel

Click the Ha rdware Monitor button i n Main Panel, th e bu tton will be
highlighted and the Hardware Monitor panel will show up as the

following figure.
In this panel, you can get the real-time status information of your

system . The informati on will be refreshed every 1 second.

28

P4M900-M7 SE/P4M890-M7 TE

5. About Panel

Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will show up as the following figure.

In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get

the the version number of [WarpSpeeder™ III] utility.

Note :

Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™ III]

divide these features to separate panels. If one chipset is not on
board, the correlative button in Main panel will be disabled, but will

not interfere other panels’ functions. This property can make
[WarpSpeeder™ III] utility more robust.

29

Motherboard Manual

/

/

p

/

/

p

APPENDENCI ES: SPEC IN OTHER LANGUAGE

GERMAN

P4M900-M7 SE P4M890-M7 TE

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /

Celeron D / Celeron 4xx Prozessoren mit
bis zu 3,8 GHz

CPU

FS B 533 / 80 0 / 106 6 MHz 533 / 80 0 / 1066 M Hz

Chipsatz

Grafi k

Super E/A

Arbeitsspeic
her

IDE

SATA

Unterstützt Hyper-Threading / Execute
Dis able Bit
Intel Architecture-64 / Extended Memory

64 Tech nology
*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A

Chr ome9 HC 3D / 2D Gr ap hic s
Max. 256M B gemei nsam be nutz ter

Vi deospeicher

ITE 871 2F
Biet et die h äufi g verwe ndete n alte n Super

E/A-Funkt io nen.
Low Pin C ount-Sc hnit ts telle
Umgebungs kontroll e,
Hardware-Überwachun g

Lüfterdrehzahl-Controller
"Smart Guar dian"-Funktion von ITE

DDR2 DIMM-St eckplät ze x 2
Unterstützt DDR2 533 / 667

Jeder DIMM unterstützt
256/512MB /1GB/2GB DDR2.
Max. 4GB Arbeitsspeicher
Ein-Kanal D DR2 S peichermodul

registrierte DIMMs. ECC DIMMs werde n
nicht unterstützt.
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133Bus
Master-Modus
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Datentransferr ate bis zu 1.5 Gb/s
Konform mit der SATA-Spezifikation
Version 1. 0.

E nhanced I ntel Spee dStep®

rocessors with

30

LGA 775
Intel Core2Duo/ Pentium 4 / Pentium D /

Celeron D / Celeron 4xx Prozessoren mit
bis zu 3,8 GHz
Unterstützt Hyper-Threading / Execute
Dis able Bit
Intel Architecture-64 / Extended Memory

64 Tech nology
*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A

Unichrome Pr o IGP
Max. 64MB gemeinsam benutzter

Vi deospeicher

ITE 871 2F
Biet et die h äufi g verwe ndete n alte n Super

E/A-Funkt io nen.
Low Pin C ount-Sc hnit ts telle
Umgebungs kontroll e,
Hardware-Überwachun g

Lüfterdrehzahl-Controller
"Smart Guar dian"-Funktion von ITE

DDR2 DIMM-St eckplät ze x 2
Unterstützt DDR2 533

Jeder DIMM unterstützt
256/512MB /1GB/2GB DDR2.
Max. 4GB Arbeitsspeicher
Ein-Kanal D DR2 S peichermodul

registrierte DIMMs. ECC DIMMs werde n
nicht unterstützt.
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 / 133Bus
Master-Modus
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Datentransferr ate bis zu 1.5 Gb/s
Konform mit der SATA-Spezifikation
Version 1. 0.

E nhanced I ntel Spee dStep®

rocessors with

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Audio-Code
c

Onboard-An
schluss

Rückseiten­E/A

Platinengr ö
ße.

Sonderf unkt
ionen

OS-Unterst
ützung

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (optio nal)
10 / 1 00 Mb/s A uto-Negotiation
Halb-/ Vollduplex-Funktion
AL C662
Unterstützt High-Definition Audio

5.1-Kanal-A udioaus g abe

PCI-Steckplatz x2 PCI-Steckplatz x2
PCI Expr ess x16 S teckplatz x1 PCI Expr ess x16 Steckplatz x1 Steckplätze

PCI Expr ess x 1-St eckplatz x1 PCI Expr ess x 1-St eckplatz x1

Diskettenlaufwerkanschluss x1 Diskettenlaufwerkanschluss x1
Druckeranschluss Anschluss x1 Druckeranschluss Anschluss x1

IDE-Anschluss x2 IDE-Anschluss x2

SATA-Anschluss x2 SATA-Anschluss x2
Fronttafelanschluss x1 Fronttafelanschluss x1
Front-Audioanschluss x1 Front-Audioanschluss x1
CD-IN-Anschluss x1 CD-IN-Anschluss x1
CPU-Lüfter-Sockel x1 CPU-Lüfter-Sockel x1
System-Lüfter-Sockel x1 System-Lüfter-Sockel x1

"CMOS löschen"-Sockel x1 "CMOS löschen"-Sockel x1
USB-Anschluss x2 USB-Anschluss x2
Stromanschluss (24- polig) x1 Stromanschluss (24-polig) x1
Stromanschluss (4-polig) x1 Stromanschluss (4-polig) x1

PS/2-Tas tatur x1
PS/2-Maus x1

Serieller Anschluss x1
VGA-Anschluss x1
LAN-Anschluss x1
USB-Anschluss x4

Audioanschluss x3

190 mm (B) X 244 mm (L) 190 mm (B) X 244 mm (L)

Unterstützt RAID 0 / 1 Unterstützt RAID 0 / 1

Windows 2K / XP / VISTA
Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ei n
Betriebs syst em hinzuzufü gen oder zu
entfernen.

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (optio nal)
10 / 1 00 Mb/s A uto-Negotiation
Halb-/ Vollduplex-Funktion
AL C662
Unterstützt High-Definition Audio

5.1-Kanal-A udioaus g abe

PS/2-Tas tatur x1
PS/2-Maus x1

Serieller Anschluss x1
VGA-Anschluss x1
LAN-Anschluss x1
USB-Anschluss x4

Audioanschluss x3

Windows 2K / XP
Biostar behält sich das Recht vor, ohne

Ankündigung die Unterstützung für ei n
Betriebs syst em hinzuzufü gen oder zu
entfernen.

31

Motherboard Manual

jusq

p

jusq

p

p

p

p

/

p

/

FRANCE

P4M900-M7 SE P4M890-M7 TE

LGA 775
Proces seurs Intel Cor e 2Duo/ P entium 4 /
Pentium D / Celeron D / Celeron 4xx
3,8 GHz

Prend en charge les technologies

UC

Bus frontal 533 / 800 / 106 6 MHz 533 / 800 / 106 6 MHz

Chipset

Graphique
s

Super E/S

Mémoire
principale

IDE

SATA

Hyper -Threadin g / d'ex écut ion de bit de
désactivation / Intel SpeedStep®
optimisée/ d'architecture I ntel 64 / de
mémoire étendue 64

*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A

Chr ome9 HC 3D / 2D Gr ap hic s
Mémoire vidé o partagée maximale de 256
Mo

ITE 871 2F
Four nit la fonc tionnalité de Super E/S

patrimoniales la plus utilisée.
Interface à faible compte de broc hes
Initiatives de co ntrôle environnementales,
Moniteur de matériel
Contrôleur de vit es se de ventilateur

Fonction " Gardien i ntelligent" de l'ITE
Fent es DDR 2 DIMM x 2
Prend en charge la DDR 2 533 / 667

Chaque DIMM prend e n ch arge des DDR2
de 256 Mo /512 Mo / 1Go / 2 Go
Capacité mémoire maximale de 4 Go
Module de mémoire DDR2 à mode à simple
voie

Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne so nt
charge

Contrôleur IDE int égr é
Mode

ri ncipale de Bus Ultra DMA 33 / 66
100 / 133
Prend en charge le mode PIO 0~4,

Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécification SATA Version

1.0

rocessors with

as prises en

LGA 775
Proces seurs Intel Cor e 2Duo/ P entium 4 /
Pentium D / Celeron D / Celeron 4xx

u'à

3,8 GHz
Prend en charge les technologies

Hyper -Threadin g / d'ex écut ion de bit de
désactivation / Intel SpeedStep®
optimisée/ d'architecture I ntel 64 / de
mémoire étendue 64

*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A

Unichrome Pr o IGP
Mémoire vidé o partagée maximale de 64
Mo

ITE 871 2F
Four nit la fonc tionnalité de Super E/S

patrimoniales la plus utilisée.
Interface à faible compte de broc hes
Initiatives de co ntrôle environnementales,
Moniteur de matériel
Contrôleur de vit es se de ventilateur

Fonction " Gardien i ntelligent" de l'ITE
Fent es DDR 2 DIMM x 2
Prend en charge la DDR 2 533

Chaque DIMM prend e n ch arge des DDR2
de 256 Mo /512 Mo / 1Go / 2 Go
Capacité mémoire maximale de 4 Go
Module de mémoire DDR2 à mode à simple
voie

Les DIMM à registres et DIMM avec code
correcteurs d'erreurs ne so nt
charge

Contrôleur IDE int égr é
Mode

ri ncipale de Bus Ultra DMA 33 / 66
100 / 133
Prend en charge le mode PIO 0~4,

Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécification SATA Version

1.0

u'à

rocessors with

as prises en

32

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (en optio n)
10 / 100 Mb/s négociation automatique
Half / Full du plex capability

AL C662
Prise en c harge de l'au dio haute définition
Sortie audio à 5.1 voies

Connecteur d'alimentatio n x1
(24 broches)

Connecteur d'alimentatio n x1
(4 broches)

Clavier PS/2 x1
Souris PS/2 x1

Port série x1
Port VGA x1
Port LAN x1
Port USB x4
Fiche audio x3

Windows 2K / XP
Biostar se réserve le droit d'ajo uter ou de

supprimer le supp ort de SE avec o u sa ns
préavis.

LAN PHY

Codec
audio

Connect eu
r
embarqué

E/S du
pann eau

arrière

Dim ension
s de la

carte
Fonc tionna
lités

spéciales

Suppor t
SE

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (en optio n)
10 / 100 Mb/s négociation automatique
Half / Full du plex capability

AL C662
Prise en c harge de l'au dio haute définition
Sortie audio à 5.1 voies

Fente PCI x2 Fente PCI x2
Slot PCI Ex press x16 x1 Slot PCI Express x16 x1 Fentes

Slot PCI Express x 1 x1 Slot PCI Ex press x 1 x1
Connec teur de di squ ette x1 Connect eur de dis quette x1

Connec teur de Port d' imprimante x1 Connecteur de P ort d'im primante x1
Connect eur IDE x2 C onnecteur IDE x2

Connect eur SATA x2 Connecteur SA TA x2
Connect eur du panneau avant x1 Connecteur du pa nne au avant x1
Connect eur Audio du p anneau ava nt x1 Connecteur Audio d u panneau ava nt x1
Connecteur d'entré e CD x1 Connecteur d'entré e CD x1

Embase de ve nti lat eur U C x1 Em base de ve ntilateur UC x1
Embase de ventilateur système x1 Embase de ventilateur système x1
Embas e d'e ffacem ent C MO S x1 Embase d'effac ement CMOS x1
Connect eur USB x2 Connect eur USB x2
Connecteur d'alimentatio n x1

(24 broches)
Connecteur d'alimentatio n x1
(4 broches)

Clavier PS/2 x1
Souris PS/2 x1

Port série x1
Port VGA x1
Port LAN x1
Port USB x4
Fiche audio x3

190 mm (l) X 244 mm (H) 190 mm (l) X 244 mm (H)

Prise en charge RAID 0 / 1 Pris e en c harge RAID 0 / 1

Windows 2K / XP / VISTA
Biostar se réserve le droit d'ajo uter ou de

supprimer le supp ort de SE avec o u sa ns
préavis.

33

Motherboard Manual

/

/

p

/

/

p

ITALIAN

P4M900-M7 SE P4M890-M7 TE

LGA 775
Processore Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx fi no a

3.8 GHz

CPU

FS B 533 / 800 / 106 6 MHz 533 / 800 / 106 6 MHz

Chipset

Grafica

Super I/O

Memoria
principale

IDE

SATA

Suppor to di Hyper -T hreadi ng / Execut e
Dis able Bit
Architettura Intel 64
Memory 6 4
*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A
Chr ome9 HC 3D / 2D Gr ap hic s
La memoria vi deo condivisa massima è di
256MB

ITE 871 2F
Fornisce le funzionalità leg acy Super I/O
usate più comunemente.
Interfaccia LPC (L ow Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Controller velocità ventolina
Funz ione "Smart G uardian" di I TE
Al loggi DIMM DDR 2 x 2
Supporto di DDR2 533 / 667
Ci ascun DIMM su pporta DDR 2 256M B /
512MB / 1GB / 2GB
Capacità massima della memoria 4GB
Modulo di memoria DDR2 a can ale singolo
DIMM registrati e DIMM ECC non sono
supportat i

Controller IDE i ntegrato
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 1 33
Suppor to modalità PIO Mode 0-4
Controller Serial ATA integrato
Veloc it à di trasferim ento dei dat i fi no a 1.5
Gb/s .
Compatibile specifiche SATA Versione 1. 0.

E nhanced I ntel Spee dStep® /

Tecnologia Extended

rocessors with

LGA 775
Processore Intel Core2Duo/ Pentium 4 /
Pentium D / Celeron D / Celeron 4xx fi no a

3.8 GHz
Suppor to di Hyper -T hreadi ng / Execut e
Dis able Bit
Architettura Intel 64
Memory 6 4
*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A
Unichrome Pr o IGP
La memoria vi deo condivisa massima è di
64MB

ITE 871 2F
Fornisce le funzionalità leg acy Super I/O
usate più comunemente.
Interfaccia LPC (L ow Pin Count)
Funzioni di controllo dell’ambiente:
Monitoraggio hardware
Controller velocità ventolina
Funz ione "Smart G uardian" di I TE
Al loggi DIMM DDR 2 x 2
Suppor to di DDR2 533
Ci ascun DIMM su pporta DDR 2 256M B /
512MB / 1GB / 2GB
Capacità massima della memoria 4GB
Modulo di memoria DDR2 a can ale singolo
DIMM registrati e DIMM ECC non sono
supportat i

Controller IDE i ntegrato
Modalità Bus Master Ultra DMA 33 / 66 /
100 / 1 33
Suppor to modalità PIO Mode 0-4
Controller Serial ATA integrato
Veloc it à di trasferim ento dei dat i fi no a 1.5
Gb/s .
Compatibile specifiche SATA Versione 1. 0.

E nhanced I ntel Spee dStep® /

Tecnologia Extended

rocessors with

34

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Codec
audio

Alloggi

Connett ori
su scheda

I/O
pannello
posteriore

Dim ension
i scheda
Caratterist
iche
speciali

Sistemi
operativi
supportat i

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (optio nal)
Negoziazi one automatica 10 / 10 0 Mb /s
Capacità Half / Full Du plex

AL C662
Supporto audio High-Definition (HD)
Uscita audio 5.1 canali
Alloggio PCI x2 Alloggio PCI x2
Al loggio PCI Express x1 6 x1 Alloggio PCI Expr ess x1 6 x1
Al loggio PCI Express x1 x1 Alloggio PCI Expr ess x1 x1

Connett ore flo ppy x1 Connett ore flo ppy x1
Connett ore Port a s tam pa nte x1 Connett ore Porta s tampa nte x1

Connett ore IDE x2 Connettore IDE x2
Connett ore SA TA x2 C onnettor e SA TA x2
Connett ore pa nnell o fro ntale x1 Connett ore pannello fro ntale x1
Connettore audio frontale x1 Connettore audio frontale x1
Connettore CD-in x1 Connettore CD-in x1
Collettore ventolina CPU x1 Collettore ventolina CPU x1
Collettore ventolina sistema x1 Collettore ventolina sistema x1
Collettore cancellazione CMOS x1 Collettore cancellazione CMOS x1
Connett ore USB x2 Connettore USB x2
Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(4 pin)

Ta s t i e r a PS /2 x1
Mouse PS/2 x1
Porta seriale x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Connett ore audio x3

19 0 mm (l argh ez za) x 244 mm (alt ez za) 19 0 m m (larghezz a) x 244 mm (al tezz a)

Suppor to RAID 0 / 1 Supporto RAID 0 / 1

Windows 2K / XP / VISTA
Biostar si riserva il diritto di aggiu ngere o
rimuovere il supporto di qualsiasi sistema
operativo se nza pre avvis o.

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (optio nal)
Negoziazi one automatica 10 / 10 0 Mb /s
Capacità Half / Full Du plex

AL C662
Supporto audio High-Definition (HD)
Uscita audio 5.1 canali

Connettore alimentazione x1
(24 pin)
Connettore alimentazione x1
(4 pin)

Ta s t i e r a PS /2 x1
Mouse PS/2 x1
Porta seriale x1
Porta VGA x1
Porta LAN x1
Porta USB x4
Connett ore audio x3

Windows 2K / XP
Biostar si riserva il diritto di aggiu ngere o
rimuovere il supporto di qualsiasi sistema
operativo se nza pre avvis o.

35

Motherboard Manual

p

p

/

/

SPANISH

P4M900-M7 SE P4M890-M7 TE

LGA 775
Procesador I ntel Core2Duo / Penti um 4 /
Pentium D / Celeron D / Celeron 4xx hasta
3,8 GHz
Adm ite Hyper -T hreading / Bit de

CPU

FS B 533 / 800 / 106 6 MHz 533 / 800 / 106 6 MHz

Conjunto
de chips

Gráfi cos

Súper E/S

Memoria
principal

IDE

SATA

deshabilitación de ejecución / Intel
SpeedStep® Mejora do / Int el
Architecture-64 / Tecnología Extended
Memory 6 4
*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A
Chr ome9 HC 3D / 2D Gr ap hic s
Memoria máxima de vídeo compartida de
256MB

ITE 871 2F
Le ofrece las funcionalidades heredadas de
uso más común Súper E/S.
Interfaz de cue nta Low Pin
Iniciativas de control de entorno,
Monitor hardware
Cont rolador de velocida d de ve ntilador
Función "Guardia intelige nte" de I TE
Ranuras DIMM DDR 2 x 2
Admite DDR2 de 533 / 667
Cada DIMM admite DDR de 25 6MB
/1GB / 2GB
Capacidad máxima de memoria de 4GB
Módulo de memoria DDR2 de canal Sencillo
No admite DIMM registrados o DIMM
compatibles con ECC

Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100
/ 1 33
Soporte los Mo dos PIO 0~4,
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 1.5 Gb/s.
Compatible con la versión SATA 1.0.

rocessors with

LGA 775
Procesador I ntel Core2Duo / Penti um 4 /
Pentium D / Celeron D / Celeron 4xx hasta
3,8 GHz
Adm ite Hyper -T hreading / Bit de
deshabilitación de ejecución / Intel
SpeedStep® Mejora do / Int el
Architecture-64 / Tecnología Extended
Memory 6 4
*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A
Unichrome Pr o IGP
Memoria máxima de vídeo compartida de
64MB

ITE 871 2F
Le ofrece las funcionalidades heredadas de
uso más común Súper E/S.
Interfaz de cue nta Low Pin
Iniciativas de control de entorno,
Monitor hardware
Cont rolador de velocida d de ve ntilador
Función "Guardia intelige nte" de I TE
Ranuras DIMM DDR 2 x 2
Adm it e DDR2 de 5 33

51 2MB

Cada DIMM admite DDR de 25 6MB
/1GB / 2GB
Capacidad máxima de memoria de 4GB
Módulo de memoria DDR2 de canal Sencillo
No admite DIMM registrados o DIMM
compatibles con ECC

Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100
/ 1 33
Soporte los Mo dos PIO 0~4,
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 1.5 Gb/s.
Compatible con la versión SATA 1.0.

rocessors with

51 2MB

36

P4M900-M7 SE/P4M890-M7 TE

p

P4M900-M7 SE P4M890-M7 TE

Red Local

Códecs de
sonido

Ranuras

Conectore
s en placa

Panel
trasero de
E/S

Ta m añ o d e
la placa
Func iones
especiales

Soporte de
sistema
operativo

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (opcio nal)
Negociaci ón de 10 / 100 Mb/s
Funciones Half / Full d úplex

AL C662
Soporte de soni do de Alta Defi nici ón
Salida de sonido de 5.1 canales
Ranura PCI X2 Ranura PCI X2
Ranura PCI Ex pres s x1 6 X1 Ranura PCI Expres s x16 X1
Ranura PCI ex pres s x 1 X 1 R anura PCI ex pres s x 1 X1

Conector disco flexible X1 Conector disco flexible X1
Conector Puert o de impresora X 1 Conect or Puerto de impresora X1

Conector IDE X2 Conector IDE X2
Conector SATA X2 Conector SATA X2
Conector de pa nel fro ntal X1 Conector de pa nel frontal X1
Conector de sonido frontal X1 Conector de sonido frontal X1
Conector de entr ada de C D X 1 Conect or de entra da de C D X 1
Cabecera de ve ntilador de C PU X1 Cabecera de ve ntilador de C PU X 1
Cabecera de ve ntilador de
sistema X1
Cabecera de borrado de CMO S X1 Cabec era de b orrado de CMO S X 1
Conector USB X2 Conector USB X2
Conector de alimentación X1
(24 patillas)
Conector de alimentación X1
(4 patillas)

Te c lado P S / 2 X 1
Ratón PS/2 X1
Puerto s erie X1
Puerto VGA X 1
Puert o de re d local X1
Puerto US B X4
Conector de sonido X3

190m m. (A) X 244 Mm. (H) 190mm. (A) X 244 Mm. (H)

Admite RAID 0 / 1 Admite RAID 0 / 1

Windows 2K / XP / VISTA
Biostar se reserva el derecho de añadir o
retirar el so
aviso previo.

orte de cualquier SO con o sin

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (opcio nal)
Negociaci ón de 10 / 100 Mb/s
Funciones Half / Full d úplex

AL C662
Soporte de soni do de Alta Defi nici ón
Salida de sonido de 5.1 canales

Cabecera de ve ntilador de
sistema X1

Conector de alimentación X1
(24 patillas)
Conector de alimentación X1
(4 patillas)

Te c lado P S / 2 X 1
Ratón PS/2 X1
Puerto s erie X1
Puerto VGA X 1
Puert o de re d local X1
Puerto US B X4
Conector de sonido X3

Windows 2K / XP
Biostar se reserva el derecho de añadir o
retirar el soporte de cualquier SO con o sin
aviso previo.

37

Motherboard Manual

p

,8

p

/

/

PORTUGUESE

P4M900-M7 SE P4M890-M7 TE

LGA 775
Processador Intel Core2Duo / Pe ntium 4 /

Pentium D / Celeron D / Celeron 4 xx até 3,8
GHz

CPU

FS B 533 / 800 / 106 6 MHz 533 / 800 / 106 6 MHz

Chipset

Placa
gráfica

Especificaç
ão Sup er

I/O

Memória
principal

IDE

SATA

Suporta as tec nologias Hyper -T hrea ding /
Execute Disable Bit / Enhanced I ntel

SpeedStep® / Intel Arquitecture -64 /
Extende d Memor y 6 4

*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A

Chr ome9 HC 3D / 2D Gr ap hic s
Memória de víde o máxima partilhada: 256

MB
ITE 871 2F
Proporciona as fu ncionalidades mais

utilizadas em termos da especificação
Super I/O.

Int erface L PC (Low Pi n Co unt).
Iniciativas para controlo do ambiente

Monitorização do hardware
Cont rolador da velocida de da v entoi nha

Função "Smart Guardia n" da I TE
Ranhuras DIMM DDR2 x 2
Suporta módulos DDR2 533 / 667

Cada mó dulo DIMM su port a uma memória
DDR2 de 256MB /512 MB / 1 GB / 2GB

Capacidade máxima de memória : 4 GB
Módulo de mem ória D DR2 de canal simples

Os módulos DIMM registados e os DIMM
ECC não são suportados
Controlador IDE integrado

Modo Bus mast er Ultra DMA 33 / 6 6 / 100
133

Suporta o mod o PIO 0~ 4,
Controlador Serial ATA integrado
Velocidades de transmissão de dados até

1.5 Gb/s.
Compatibilidade com a especificação SATA

ver são 1.0.

rocessors with

LGA 775
Processador Intel Core2Duo / Pe ntium 4 /

Pentium D / Celeron D / Celeron 4 xx até 3
GHz

Suporta as tec nologias Hyper -T hrea ding /
Execute Disable Bit / Enhanced I ntel

SpeedStep® / Intel Arquitecture -64 /
Extende d Memor y 6 4

*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A

Unichrome Pr o IGP
Memória de víde o máxima partilhada: 64

MB
ITE 871 2F
Proporciona as fu ncionalidades mais

utilizadas em termos da especificação
Super I/O.

Int erface L PC (Low Pi n Co unt).
Iniciativas para controlo do ambiente

Monitorização do hardware
Cont rolador da velocida de da v entoi nha

Função "Smart Guardia n" da I TE
Ranhuras DIMM DDR2 x 2
Supor ta m ó dulos DDR2 533

Cada mó dulo DIMM su port a uma memória
DDR2 de 256MB /512 MB / 1 GB / 2GB

Capacidade máxima de memória : 4 GB
Módulo de mem ória D DR2 de canal simples

Os módulos DIMM registados e os DIMM
ECC não são suportados
Controlador IDE integrado

Modo Bus mast er Ultra DMA 33 / 6 6 / 100
133

Suporta o mod o PIO 0~ 4,
Controlador Serial ATA integrado
Velocidades de transmissão de dados até

1.5 Gb/s.
Compatibilidade com a especificação SATA

ver são 1.0.

rocessors with

38

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Codec de
som

Conectore
s na placa

Entradas/
Saídas no

painel
traseiro

Ta m a n h o
da pl aca

Característ
icas

especiais
Sistemas
operativos

suportado
s

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (opcio nal)

Auto ne goc iaç ão de 10 / 100 MB/s
Capacidade semi/full -dupl ex

AL C662
Suporta a especificação High-Definition

Audio
Saída de á udio de 5. 1 ca nais
Ranhura PCI x2 Ranhura PCI x2

Ranhura PCI Expres s x 16 x1 Ranhura PCI Express x 16 x1 Ranhuras
Ranhura PCI Expres s x 1 x1 Ranhura PCI Express x 1 x1
Conector da unida de de disquetes x 1 Conector da unida de de disquetes x 1

Conect or da para im pres sora x1 C onector da para impressora x1
Conector IDE x2 Conector IDE x2

Conector SATA x2 Conector SATA x2
Conector do pai nel fro ntal x1 Conec tor do pai nel fro ntal x1

Conector de áu dio fro ntal x1 Conector de áudio frontal x1
Conect or para entrada de CDs x1 Conector para e ntrada de C Ds x1

Conect or da ventoi nha da CPU x1 Conector da ve ntoinha d a CPU x1
Conect or da ve ntoinha do

sistema x1
Conector para lim peza do CMO S x1 Conector para lim peza do CMO S x1

Conector USB x2 Conector USB x2
Conector de alimentação x1

(24 pin os)
Conector de alimentação x1

(4 pinos)

Te c lado P S / 2 x1
Rato PS/2 x1

Porta série x1
Porta VGA x1

Porta LAN x1
Porta USB x4

Tom ada de áudio x3

190 mm (L) X 244 m m (A) 190 m m (L) X 244 mm (A)

Suporta as funções RAID 0 / 1 Suporta as funções RAID 0 / 1

Windows 2K / XP / VISTA
A Biostar reserva-se o direito de adicionar

ou remover sup orte para qualquer sistema
operativo com ou sem avis o prévio.

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (opcio nal)

Auto ne goc iaç ão de 10 / 100 MB/s
Capacidade semi/full -dupl ex

AL C662
Suporta a especificação High-Definition

Audio
Saída de á udio de 5. 1 ca nais

Conect or da ve ntoinha do
sistema x1

Conector de alimentação x1
(24 pin os)

Conector de alimentação x1
(4 pinos)

Te c lado P S / 2 x1
Rato PS/2 x1

Porta série x1
Porta VGA x1

Porta LAN x1
Porta USB x4

Tom ada de áudio x3

Windows 2K / XP
A Biostar reserva-se o direito de adicionar

ou remover sup orte para qualquer sistema
operativo com ou sem avis o prévio.

39

Motherboard Manual

,8

g /

p

g /

p

POLISH

P4M900-M7 SE P4M890-M7 TE

LGA 775
Procesor Intel Cor e2Duo/ Penti um 4 /
Pentium D / Celeron D / Celeron 4xx do 3
GHz

Procesor

FS B 533 / 800 / 106 6 MHz 533 / 800 / 106 6 MHz

Chipset

Grafika

Pamięć
główna

Super I/O

IDE

SATA

Obsługa Hyp er-Threadin
Bit / Enhanced I ntel SpeedStep® / Intel
Architecture-64 / Extended Memory 64
Technol ogy
*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A
Chr ome9 HC 3D / 2D Gr ap hic s
Maks. wielkość współdzielonej pamięci
video wynosi 256MB

Gniaz da DDR 2 DIMM x 2
Obsługa DDR 2 533 / 667
Każde gniazd o DIMM obsługuje moduły
256MB /5 12MB / 1GB / 2GB D DR2
Maks. wielkość pamięci 4GB
Moduł pamięci DDR2 z trybem
poje dynczego kanału
Brak obsługi Registered DIMM oraz ECC
DIMM
ITE 871 2F
Zapewni a naj bardz iej powsz echne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warun ków prac y,
Monitor H/W
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guar dian"

Zi ntegrowany kont roler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Master
obsługa PIO tryb 0~4,
Zi ntegrow any kont rol er Serial ATA
Transfer danych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji

1.0.

Exec ute Disable

rocessors with

40

LGA 775
Procesor Intel Cor e2Duo/ Penti um 4 /
Pentium D / Celeron D / Celeron 4xx do 3,8
GHz
Obsługa Hyp er-Threadin
Bit / Enhanced I ntel SpeedStep® / Intel
Architecture-64 / Extended Memory 64
Technol ogy
*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A
Unichrome Pr o IGP
Maks. wielkość współdzielonej pamięci
video wy nosi 6 4MB

Gniaz da DDR 2 DIMM x 2
Obsługa DDR 2 533
Każde gniazd o DIMM obsługuje moduły
256MB /5 12MB / 1GB / 2GB D DR2
Maks. wielkość pamięci 4GB
Moduł pamięci DDR2 z trybem
poje dynczego kanału
Brak obsługi Registered DIMM oraz ECC
DIMM
ITE 871 2F
Zapewni a naj bardz iej powsz echne funkcje
Super I/O.
Interfejs Low Pin Count
Funkcje kontroli warun ków prac y,
Monitor H/W
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guar dian"

Zi ntegrowany kont roler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Master
obsługa PIO tryb 0~4,
Zi ntegrow any kont rol er Serial ATA
Transfer danych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji

1.0.

Exec ute Disable

rocessors with

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

LAN PHY

Kodek
dźwiękowy

Złącza
wbudowan

e

Back Panel
I/O

Wymiary
płyty
Funkcje

specjalne
Obsluga
systemu

operacyjn
ego

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (opcja)

10 / 100 Mb/s z automatyczną neg oc jac ją
szybkości

Działanie w trybie połowicznego / pełnego
dupleksu
AL C662

Obsługa High-Definition Audio

5.1 ka nałowe wy jście audio
Gniazdo PCI x2 Gniazdo PCI x2

Gniazdo PCI Express x16 x1 Gniazdo PCI Express x16 x1 Gniazda
Gniazdo PCI Express x 1 x1 Gniazdo PCI Express x 1 x1
Złącze napędu dyskietek x1 Złącze napędu dyskietek x1

Złącze Port drukarki x1 Z łącze Port druk arki x1
Złącze IDE x2 Złącze IDE x2

Złącze SATA x2 Złącze SATA x2
Złącze panel a przedni ego x1 Złąc ze panela prz edniego x1

Przednie złącze a udio x1 Przednie złącze audio x1
Złącze wejścia CD x1 Złącze wejścia CD x1

Złącze główkowe wentylatora proces ora x1 Złącze główkowe wentylatora procesora x1
Złącze główkowe wentylatora

systemowego x1
Złącze główkowe kasowani a

CMOS x1
Złącze USB x2 Złącze USB x2

Złącze z as ilania (24 pi now e) x1 Złącze z as ilania (24 pi now e) x1
Złącz e zasilania (4 pin owe) x1 Złącz e zasilania (4 pin owe) x1
Klawiatura PS/2 x1
Mysz PS/2 x1

Port szeregowy x1
Port VGA x1

Port LAN x1
Port USB x4

Gniazdo audio x3

190 mm (S) X 244 m m (W) 190 mm (S) X 244 mm (W)

Obsługa RA ID 0 / 1 O bsługa RAID 0 / 1

Windows 2K / XP / VISTA
Bi ost ar z astrz ega sobie prawo dodaw ania

lub o dwoływania obsługi dowolnego
syst emu operacyjnego bez powi adomienia.

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (opcja)

10 / 100 Mb/s z automatyczną neg oc jac ją
szybkości

Działanie w trybie połowicznego / pełnego
dupleksu
AL C662

Obsługa High-Definition Audio

5.1 ka nałowe wy jście audio

Złącze główkowe wentylatora
systemowego x1

Złącze główkowe kasowani a
CMOS x1

Klawiatura PS/2 x1
Mysz PS/2 x1

Port szeregowy x1
Port VGA x1

Port LAN x1
Port USB x4

Gniazdo audio x3

Windows 2K / XP
Bi ost ar z astrz ega sobie prawo dodaw ania

lub o dwoływania obsługi dowolnego
syst emu operacyjnego bez powi adomienia.

41

Motherboard Manual

g /

p

g /

p

/

/

/

/

ф

ф

RUSSIAN

P4M900-M7 SE P4M890-M7 TE

LGA 775
Процессор Int el Core2Duo/ Pe ntium 4 /

CPU
(централь

ны й
проц ес сор

)

FS B 533 / 800 / 106 6 МГц 533 / 80 0 / 106 6 МГц

Набор
микросхе
м

Графика

Основная
память

Super I/O

IDE

SATA

Pentium D / Celeron D / Celeron 4xx до 3. 8

ГГц
Подде ржка техн оло гий Hyper-Thre adin

Execute Disable Bit / Enhanced I ntel
SpeedStep® / Intel Architecture-64 /
Extende d Memor y 6 4 Tec h nolog y
*It is recommended to use
95W power consum pti on.

VIA P4M900
VIA VT8237A

Chr ome9 HC 3D / 2D Gr ap hic s

Максимальн ая совместно ис п ользуе мая
видео память составляет 256 МБ

Слоты DDR2 DIMM x 2
Подде ржка DDR2 533 / 667
Каждый модуль DIMM поддерж ивае т
256MB / 512МБ / 1ГБ / 2ГБ DDR 2
Максимальн ая ёмкость пам я ти 4 ГБ
Модуль памя ти с од нока наль ным
реж имом DDR2
Не подде рж ивае т за рег истриров ан ные
модули DIMM and ECC DIMM

ITE 871 2F

Обес печивает на ибо лее испо ль зу емы е
действ ующие функциональны е
возможности Super I/O.
Интерф ейс с низким количеством
выводов
Иниц иа ти вы по охр ане ок руж ающей
среды,
Аппара тный монитор
Регуля тор скор ости
Функция ITE "Smart Guardian"
(Интеллектуа льна я защита)

Вс троенное устройство управления
вс трое нны ми инте рфе йс ами устр ойс тв
Режим " хозяина" шины Ultra DMA 33

100 / 133

Подде ржка режима PIO 0~ 4,
Вс троенное пос ледовате льное
устройство упр авлени я ATA
скорос ть пер едач и дан ных до 1.5
гига бит/с.
Соотве тств ие специ

1.0.

rocessors with

икац и и SATA версия

42

LGA 775
Процессор Int el Core2Duo/ Pe ntium 4 /
Pentium D / Celeron D / Celeron 4xx до 3. 8

ГГц
Подде ржка техн оло гий Hyper-Thre adin

Execute Disable Bit / Enhanced I ntel
SpeedStep® / Intel Architecture-64 /
Extende d Memor y 6 4 Tec h nolog y
*It is recommended to use
95W power consum pti on.

VIA P4M890
VIA VT8237A

Unichrome Pr o IGP

Максимальн ая совместно ис п ользуе мая
видео память составляет 64 МБ

Слоты DDR2 DIMM x 2
Подде ржка DDR2 533
Каждый модуль DIMM поддерж ивае т
256MB / 512МБ / 1ГБ / 2ГБ DDR 2
Максимальн ая ёмкость пам я ти 4 ГБ
Модуль памя ти с од нока наль ным
реж имом DDR2
Не подде рж ивае т за рег истриров ан ные
модули DIMM and ECC DIMM

ITE 871 2F

Обес печивает на ибо лее испо ль зу емы е
действ ующие функциональны е
возможности Super I/O.
Интерф ейс с низким количеством
выводов
Иниц иа ти вы по охр ане ок руж ающей
среды,
Аппара тный монитор
Регуля тор скор ости
Функция ITE "Smart Guardian"
(Интеллектуа льна я защита)
Вс троенное устройство управления
вс трое нны ми инте рфе йс ами устр ойс тв

66

Режим " хозяина" шины Ultra DMA 33
100 / 133

Подде ржка режима PIO 0~ 4,
Вс троенное пос ледовате льное
устройство упр авлени я ATA
скорос ть пер едач и дан ных до 1.5
гига бит/с.
Соотве тств ие специ

1.0.

rocessors with

66

икац и и SATA версия

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Локальна
я сеть

Звуковой
кодек

Слоты

Встроенн
ый раз ъём

Задн яя
пане ль
средств
ввода-выв
ода

Размер
пане ли
Спец иаль
ны е
техн иче ск
ие
характер и
стики

Подде ржк
а OS

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (дополни тель но)

Автоматическое согласование 10 / 100
Мб/с
Частич ная / пол ная дуплексна я
способнос ть

AL C662
Звуковая поддержка High-Definition

5.1кана льный звуков ой выход

Слот PCI x2 Слот PCI x2
Слот PCI Express x16 x1 Слот PCI Express x16 x1
Слот PCI Express x 1 x1 Слот PCI Ex press x 1 x1

Разъём НГМД x1 Разъём НГМД x1
Разъём Порт подключе ния принтера x1 Разъём Порт под клю че ния принтера x1

Разъём IDE x2 Раз ъём IDE x2
Разъём SATA x2 Раз ъём SATA x2
Разъём на лицево й пане ли x1 Разъём на лиц ево й панели x1
Входной звук овой раз ъём x1 Входной звук овой раз ъём x1
Разъём вв ода дл я CD x1 Разъём вв ода дл я CD x1
Контактирующее п рис пособле ние
вентилятора ц ент раль ного процессора x1
Контактирующее п рис пособле ние
вентилятора системы x1
Открытое контак тирующее
прис пособл ение CMOS x1
USB-разъём x2 USB-разъём x2
Разъем пит ан ия (24 вывод ) x1 Раз ъем пит ан ия (24 вывод ) x1
Разъем пит ан ия (4 вывод) x1 Раз ъем пит ан ия (4 вывод) x1

Клавиатура PS/ 2 x1
Мышь PS/2 x1
Последо вате льный порт x1
Порт VGA x1
Порт LAN x1
USB-порт x4
Гнездо для подключе ния
наушников x3

19 0 мм (Ш) X 244 мм (В) 19 0 мм (Ш) X 244 мм (В)

Подде ржка R AI D 0 / 1 Подде ржка RAID 0 / 1

Windows 2K / XP / VISTA
Biostar сохраняет за собой право

добав лять или удалять средс тва
обес пече ни я для OS с ил и без
пред варите льно го уведомления.

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (дополни тель но)

Автоматическое согласование 10 / 100
Мб/с
Частич ная / пол ная дуплексна я
способнос ть

AL C662
Звуковая поддержка High-Definition

5.1кана льный звуков ой выход

Контактирующее п рис пособле ние
вентилятора ц ент раль ного проце сс ора x1
Контактирующее п рис пособле ние
вентилятора системы x1
Открытое контак тирующее
прис пособл ение CMOS x1

Клавиатура PS/ 2 x1
Мышь PS/2 x1
Последо вате льный порт x1
Порт VGA x1
Порт LAN x1
USB-порт x4
Гнездо для подключе ния
наушников x3

Windows 2K / XP
Biostar сохраняет за собой право

добав лять или удалять средс тва
обес пече ни я для OS с ил и без
пред варите льно го уведомления.

43

Motherboard Manual

g /

/

/

g /

/

ARABIC

LGA 775

تﺎﺠﻟﺎﻌﻡIntel Core2Duo

D / C eleron D / Celeron 4xx ﺑ ددﺮﺘ ﻳ ﻰﻟإ ﻞﺼ8.3

تﺎﻴﻨﻘﺕ ﻢﻋ ﺪﺕHyper-Thre adin

Bit

En hanced I ntel Spee dStep® /

Extende d Memor y 6 4 Tec h nolog y

*It is recommended to use processors with

ددﺮﺕ 5 33 / 800 / 10 66 ﺰﺕﺮه ﺎﺠﻴﻡ

ﺔآﺮﺘﺸﻤﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ64ﺖﻳﺎﺑ ﺎﺠﻴﻡ

ﻢﻋﺪﺕ ﻞآ ﺔﺤﺘﻓ DIMM ﻢﻋ ﺪﺕ ةﺮآاذ ﻦﻡ عﻮﻥ DDR 2 ﺔﻌﺳ

256 ﺎﺠﻴﻡ ﺖﻳ ﺎ ﺑ /512 ﺎﺠﻴﻡ ﺖﻳﺎﺑ و1 ﺎﺠﻴﺝ ﺖﻳﺎﺑ / 2 ﺝﺎﺠﻴ

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺕ ﻻDIM M ﻊﻡ ﻖﻓاﻮﺘﺕ ﻻ ﻲﺘﻟا ﻚﻠﺕو ECC

ﺔﻴﻨﻘﺘﺑ ﻞﻗ ﺎﻥUltra DMA 33 / 66 / 100 / 133

Pe ntium 4 / Pentium

ﺰﺕﺮه ﺎﺠﻴﺝ

Exec ute Disabl e

95W power consum pti on.

VIA P4M890

VIA VT8237A

Unichrome Pr o IGP

ﻢﻋﺪﺕ ةﺮآاﺬﻟا ﻦﻡ عﻮﻥ DDR2 تﺎﻌﺳ 533 ﺎﺠﻴﻡ ﺖﻳ ﺎ ﺑ

ةﺪﺣو ةﺮآاذ DDR2 ﺔﻳدﺎﺣأ ةﺎﻨﻘﻟا

ITE 871 2F

ﺮﻓﻮﺕ ﺔﻔﻴﻇو Super I /O ﺮﺜآﻷا ًﺎﻡاﺪﺨﺘﺳا.

ﺕﻢﻋﺪ ﺔﻴﻨﻘﺕ

Low Pi n Co unt Int erfac e

ﺔﻔﻴﻇو"Smart Guar dian" ﻦﻡ ITE

ﻢﻜﺤﺘﻡ IDE ﻞﻡﺎﻜﺘ ﻡ

ﻊﺿو ﻢﻋدPI O Mode 0~4

ﻢﻜﺤﺘﻡ Serial ATA ﻞﻡ ﺎﻜﺘ ﻡ

ﺔﻘﺑﺎﻄﻡ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 1.0.

تﺎﺠﻟﺎﻌﻡIntel Core2Duo/ Pe ntium 4 / Pentium

D / C eleron D / Celeron 4xx ﺑ ددﺮﺘ ﻳ ﻰﻟإ ﻞﺼ8.3

تﺎﻴﻨﻘﺕ ﻢﻋ ﺪﺕHyper-Thre adin

Bit / En hanced I ntel Spee dStep®

Extende d Memor y 6 4 Tec h nolog y

*It is recommended to use processors with

ددﺮﺕ 5 33 / 800 / 10 66 ﺰﺕﺮه ﺎﺠﻴﻡ

Chr ome9 HC 3D / 2D Gr ap hic s

ﺔآﺮﺘﺸﻤﻟا ﻮﻳﺪﻴﻔﻟا ةﺮآاﺬﻟ ﺔﻌﺳ ﻰﺼﻗأ256ﺖﻳﺎ ﺑ ﺎﺠﻴﻡ

Exec ute Disabl e

95W power consum pti on.

VIA P4M900

VIA VT8237A

ﺔﺤ ﺘﻓDDR2 DIMM دﺪﻋ2

ﻢﻋﺪﺕ ةﺮآاﺬﻟا ﻦﻡ عﻮﻥ DDR2 تﺎﻌﺳ 533 / 66 7 ﺎﺠﻴﻡ ﺖﻳ ﺎﺑ

ﻢﻋﺪﺕ ﻞآ ﺔﺤﺘﻓ DIM M ﻢﻋﺪﺕ ةﺮآاذ ﻦﻡ عﻮﻥ DDR2 ﺔﻌﺳ

256 ﺎﺠﻴﻡ ﺖﻳ ﺎ ﺑ /512 ﺎﺠﻴﻡ ﺖﻳﺎﺑ و1 ﺎﺠﻴﺝ ﺖﻳﺎﺑ / 2 ﺎﺠﻴﺝ

ﺖﻳﺎﺑ

ﺔﻌﺳ ةﺮآاذ ىﻮﺼﻗ 4 ﺎﺠﻴﺝ ﺖﻳ ﺎ ﺑ

ةﺪﺣو ةﺮآاذ DDR2 ﺔﻳدﺎﺣأ ةﺎﻨﻘﻟا

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺕ ﻻDIM M ﻊﻡ ﻖﻓاﻮﺘﺕ ﻻ ﻲﺘﻟا ﻚﻠﺕو ECC

ﺮﻓﻮﺕ ﺔﻔﻴﻇو Super I /O ﺮﺜآﻷا ًﺎﻡاﺪﺨﺘﺳا.

ﺕﻢﻋﺪ ﺔﻴﻨﻘﺕ Low Pi n Count Int erfac e

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻡ ﺔﻓﺮﻌﻤﻟ ﺔﻟﺎﺣ ةﺰﻬﺝﻷا

ﺐﻗاﺮﻡ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا

ﺔﻔﻴﻇو"Smart Guar dian" ﻦﻡ ITE

ﻢﻜﺤﺘﻡ IDE ﻞﻡﺎﻜﺘ ﻡ

ﺔﻴﻨﻘﺘﺑ ﻞﻗ ﺎﻥUltra DMA 33 / 66 / 100 / 133

ﻊﺿو ﻲﺴﻴﺋر

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻢﻜﺤﺘﻡ Serial ATA ﻞﻡ ﺎﻜﺘ ﻡ

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺑ ﻞﺼﺕ ﻰﻟإ1. 5 ﺖﺑﺎﺠﻴﺝ/ﺔﻴﻥﺎﺙ.

ﺔﻘﺑﺎﻄﻡ تﺎﻔﺹاﻮﻤﻟ SATA راﺪﺹﻹا 1.0.

LGA 775

ﺰﺕﺮه ﺎﺠﻴﺝ

ﺔﺤ ﺘﻓDDR2 DIMM دﺪﻋ2

ﺖﻳﺎﺑ

ﺔﻌﺳ ةﺮآاذ ﻗىﻮﺼ 4 ﺎﺠﻴﺝ ﺖﻳ ﺎ ﺑ

ITE 871 2F

ﻞﺋﺎﺳو ﻢﻜﺤﺘﻟا ﻲﻓ ﺔﺌﻴﺒﻟا:

ﺐﻗاﺮﻡ ﺔﻓﺮﻌﻤﻟ ﺣﺔﻟﺎ ةﺰﻬﺝﻷا

ﺐﻗاﺮﻡ ﻲﻓ ﺔﻋﺮﺳ ﺔﺣوﺮﻤﻟا

ﻊﺿو ﻲﺴﻴﺋر

ﻞﻘﻥ تﺎﻥﺎﻴﺒﻟا تﺎﻋﺮﺴﺑ ﻞﺼﺕ ﻰﻟإ1. 5 ﺖﺑﺎﺠﻴﺝ/ﺎﺙﺔﻴﻥ.

P4M900-M7 SE P4M890-M7 TE

ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا

ﺔ ﻳ ﺰآﺮﻤ ﻟا

ﻟاﻞﻗﺎﻨ ﻲﻡﺎ ﻡﻷا

ﻲﺒﻥﺎﺠﻟا

ﺔﻋﻮﻤﺠﻡ ﺢﺋاﺮﺸﻟا

تﺎ ﻡ ﻮ ﺳ ﺮﻟا ﺔﻗﺎﻄﺑ

ةﺮآاﺬﻟا ﺔﻴﺴﻴﺋﺮﻟا

Super I/O

ﻔﻨﻡﺬ IDE

SATA

44

ﻆﻔﺘﺤﺕ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ

Realtek RTL 8201CL PHY/

At heros AR 8012 PHY )يرﺎﻴﺘﺧا(

ﻲﺋﺎ ﻘﻠﺕ ضوﺎﻔﺕ10/100 ﺖﻳﺎﺑ ﺎﺠﻴﻡ /ﺔﻴ ﻥﺎ ﺙ

ﻞﻡﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻡإ/ﻲﻔﺼﻨﻟا

AL C662

ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺕ ﻢﻋﺪﺕ ﻦﻡ ﻒﻳﺮﻌﺘﻟا

5.1تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ

ﻔﻡ ﺔﺣﻮﻟ ﺢﻴﺕﺎPS/2 دﺪﻋ1

سوﺎﻡ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺕ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡV GA دﺪﻋ1

ﺔﻴﻠ ﺤﻡ لﺎﺼﺕا ﺔﻜﺒﺵ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻓﺎﻨ ﻡUSB دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻡ دﺪﻋ3

ﻢﻋﺪﺕ ﺔﻴﻨﻘﺕ RA ID 0 / 1

Windows 2K / XP

ﻆﻔﺘﺤﺕ Biostar ﺎﻬﻘﺤﺑ ﻲﻓ ﺔﻓﺎﺿإ وأ ﺔﻟازإ ﻢﻋﺪﻟا يﻷ مﺎﻈﻥ

ﻞﻴﻐﺸﺕ رﺎﻄﺥﺈ ﺑ وأ نوﺪﺑ رﺎﻄ ﺥإ.

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Realtek RTL 8201CL PHY/

At heros AR 8012 PHY )يرﺎﻴﺘﺧا(

ﻲﺋﺎ ﻘﻠﺕ ضوﺎﻔﺕ10/100 ﺖﻳﺎﺑ ﺎﺠﻴﻡ /ﺔﻴ ﻥﺎ ﺙ

ا ﺔﻴﻥﺎﻜﻡإﻞﻡﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟ/ﻲﻔﺼﻨﻟا

AL C662

ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺕ ﻢﻋﺪﺕ

5.1تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ

ﺔﺤ ﺘﻓPCI دﺪﻋ2 ﺔﺤ ﺘﻓPCI دﺪﻋ2
ﺔﺤ ﺘﻓx16 PCI Express دﺪﻋ1 ﺔﺤ ﺘﻓx16 PCI Express دﺪﻋ1
ﺔﺤ ﺘﻓPCI Express x 1 دﺪﻋ1 ﺔﺤ ﺘﻓPCI Express x 1 دﺪﻋ1

ﺔﻥﺮ ﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻥﺮ ﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ ﻋ دﺪ1

ﺔﻌﺑﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻌ ﺑ ﺎﻃ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡIDE دﺪﻋ2 ﺬﻔﻨﻡIDE دﺪﻋ2
ﺬﻔﻨﻡSATA دﺪﻋ2 ﺬﻔﻨﻡSATA دﺪﻋ2

ﺔﻴ ﻡﺎ ﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﺔﻴ ﻡﺎ ﻡﻷ ا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ1

ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1 ﻲﻡﺎ ﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡCD-IN دﺪﻋ1 ﺬﻔﻨﻡCD-IN دﺪﻋ1

ﻠﺹوﺔﻳﺰآﺮﻤﻟ ا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣ وﺮﻡ ﺔ دﺪﻋ1 ﺔﻳ ﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮ ﻡ ﺔﻠﺹو دﺪﻋ1

مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو دﺪﻋ1 مﺎﻈﻨ ﻟا ﺔﺣوﺮ ﻡ ﺔﻠﺹو دﺪﻋ1

ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1 ﺢﺴﻡ ﺔﻠﺹوCMOS دﺪﻋ1

ﺬﻔﻨﻡUSB دﺪﻋ2 ﺬﻔﻨﻡUSB دﺪﻋ2
ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)24سﻮﺑد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)24سﻮﺑد( دﺪﻋ1
ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)4ﺲ ﻴﺑﺎ ﺑد( دﺪﻋ1 ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ)4ﺲ ﻴﺑﺎ ﺑد( دﺪﻋ1

ﺢﻴﺕﺎﻔﻡ ﺔﺣﻮﻟPS/2 دﺪﻋ1

سوﺎﻡ PS/2 دﺪﻋ1

ﻲﻠﺴﻠﺴﺕ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻔﻨﻡV GA دﺪﻋ1

ﺔﻴﻠ ﺤﻡ لﺎﺼﺕا ﺔﻜﺒﺵ ﺬﻔﻨﻡ دﺪﻋ1

ﺬﻓﺎﻨ ﻡUSB دﺪﻋ4

تﻮﺹ ﺲﺒﻘﻡ دﺪﻋ3

Windows 2K / XP / VISTA

ﻞﻴﻐﺸﺕ رﺎﻄﺥﺈ ﺑ وأ نوﺪﺑ رﺎﻄ ﺥإ.

ﺔﻜﺒﺵ ﺔﻴﻠﺥاد

ﻚﻳدﻮآ تﻮﺼﻟا

تﺎﺤﺘﻔﻟا

ﺬﻓﺎ ﻨﻤ ﻟا ﻰﻠﻋ ﺢﻄﺳ

ﺔ ﺣ ﻮﻠﻟا

ﺬﻓﺎ ﻨﻡ ﻞﺥد/جﺮﺥ

ﺔﺣﻮﻠﻟا ﺔﻴﻔﻠﺨﻟا

ﻢﺠﺣ ﺔﺣﻮﻠﻟا 190 ﻢﻡ)ضﺮﻋ (X 244 ﻢﻡ)عﺎ ﻔ ﺕر ا( 190 ﻢﻡ)ضﺮﻋ (X 244 ﻢﻡ)عﺎ ﻔ ﺕرا(

ﺎیاﺰﻣ ﺔﺻﺎﺧ ﻢﻋﺪﺕ ﺔﻴﻨﻘﺕ RAID 0 / 1

ﻢﻋد ﺔﻤﻈﻥأ

ﻞﻴﻐﺸ ﺘﻟا

45

Motherboard Manual

p

p

p

p

JAPANESE

P4M900-M7 SE P4M890-M7 TE

LGA 775

Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Cel eron 4xx

GHz

CPU

FS B 533 / 800 / 106 6 MHz 533 / 800 / 106 6 MHz

チップセット VIA P4M900

グラフィッ

クス

メインメモ
リ

Super I/O

IDE

SATA

Hyper -Threadin g / Exec ute Di sable Bit /

Enhanced Intel Sp eedStep® / Intel
Architecture-64 / Extended Memory 64

Technol ogy をサポートします
*It is recommended to use

95W power consum pti on.

VIA VT8237A

Chr ome9 HC 3D / 2D Gr ap hic s

最大の共有ビデオメモリは256MB です

DDR2 DIMMスロット x 2
DDR2 53 3 / 667をサポート

各DIMMは 2 56/ 512MB/1GB/ 2GB DDR2をサ
ポート

最大メモリ容量4GB
シングル チャンネルモードDDR 2メモリモジュ

ール
登録済みDIMMとECC DIMMはサポートされま

せん

ITE 871 2F

もっとも一般に使用されるレガシーSuper I/O

機能を採用しています。
低ピンカウントインターフェイス

環境コントロールイニシアチブ、
H/Wモニター

ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能

統合IDEコントローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド

PIO Mode 0~4のサポート、

統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度

SATAバージョン1.0仕様に準拠。

rocessor up to 3.8

rocessors with

46

LGA 775

Intel Core2Duo/ Pentium 4 / Pentium D /
Celeron D / Cel eron 4xx

GHz
Hyper -Threadin g / Exec ute Di sable Bit /

Enhanced Intel Sp eedStep® / Intel
Architecture-64 / Extended Memory 64

Technol ogy をサポートします
*It is recommended to use

95W power consum pti on.

VIA P4M890
VIA VT8237A

Unichrome Pr o IGP

最大の共有ビデオメモリは64MB です

DDR2 DIMMスロット x 2
DDR2 533をサポート

各DIMMは 2 56/ 512MB/1GB/ 2GB DDR2をサ
ポート

最大メモリ容量4GB
シングル チャンネルモードDDR 2メモリモジュ

ール
登録済みDIMMとECC DIMMはサポートされま

せん

ITE 871 2F

もっとも一般に使用されるレガシーSuper I/O

機能を採用しています。
低ピンカウントインターフェイス

環境コントロールイニシアチブ、
H/Wモニター

ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能

統合IDEコントローラ

Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド

PIO Mode 0~4のサポート、

統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度

SATAバージョン1.0仕様に準拠。

rocessor up to 3.8

rocessors with

P4M900-M7 SE/P4M890-M7 TE

P4M900-M7 SE P4M890-M7 TE

Realtek RTL 8201CL PHY/

LAN PHY

サウンド

Codec

オンボード

コネクタ

背面パネル

I/O

ボードサイ

ズ

特殊機能 RAID 0 / 1のサポート RAID 0 / 1のサポート

OSサポー
ト

At heros AR 8012 PHY (オプション)

10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能

AL C662

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

PCIスロット x2 PCIスロット x2

PCI Express x16スロット x1 PCI Expr es s x16スロット x1 スロット

PCI Express x 1スロット x1 PCI Expr ess x 1スロット x1

フロッピーコネクタ x1 フロッピーコネクタ x1
プリンタポートコネクタ x1 プリンタポートコネクタ x1

IDEコネクタ x2 IDEコネクタ x2
SATAコネクタ x2 SATAコネクタ x2

フロントパネルコネクタ x1 フロントパネルコネクタ x1
フロントオーディオコネクタ x1 フロントオーディオコネクタ x1

CDインコネクタ x1 CDインコネクタ x1
CPUファンヘッダ x1 CPUファンヘッダ x1

システムファンヘッダ x1 システムファンヘッダ x1
CMOSクリアヘッダ x1 CMO Sクリアヘッダ x1

USBコネクタ x2 USBコネクタ x2

電源コネクタ(24ピン) x1 電源コネクタ(24ピン) x1

電源コネクタ(4ピン) x1 電源コネクタ(4ピン) x1

PS/2キーボード x1

PS/2マウス x1
シリアルポート x1

VGAポート x1
LANポート x1

USBポート x4
オーディオジャック x3

19 0 mm (幅) X 244 mm (高さ) 190 mm (幅) X 24 4 mm (高さ)

Windows 2K / XP / VISTA
Biostarは事前のサポートなしにOSサポートを

追加または削除する権利を留保します。

Realtek RTL 8201CL PHY/
At heros AR 8012 PHY (オプション)

10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能

AL C662

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト

PS/2キーボード x1

PS/2マウス x1
シリアルポート x1

VGAポート x1
LANポート x1

USBポート x4
オーディオジャック x3

Windows 2K / XP
Biostarは事前のサポートなしにOSサポートを

追加または削除する権利を留保します。

2007/06/11

47