Biostar NM70I-807, NM70I-1007U User Manual

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee that
interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents
here and specially disclaims any implied warranties of merchantability or fitness
for any purpose. Further the vendor reserves the right to revise this publication
and to make changes to the contents here without obligation to notify any party
beforehand.

Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we
will not be responsible for any mistakes found in this user’s manual. All the brand
and product names are trademarks of their respective companies.

Dichiarazione di conformità
sintetica

Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002

Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive

2004/108/CE, 2006/95/CE e
1999/05/CE

quando ad esso applicabili

Short Declaration of conformity

We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives

2004/108/CE, 2006/95/CE and
1999/05/CE

whenever these laws may be applied

Table of Contents

Chapter 1: Introduction.......................................... 1

1.1 Before You Start ................................................................................1

1.2 Package Checklist ............................................................................1

1.3 Motherboard Specifications .............................................................2

1.4 Central Processing Unit (CPU) .......................................................3

1.5 Rear Panel Connectors....................................................................3

1.6 Motherboard Layout..........................................................................4

Chapter 2: Hardware Installation ........................... 5

2.1 Connect Cooling Fans...................................................................... 5

2.2 Install System Memory.....................................................................6

2.3 Expansion Slots.................................................................................7

2.4 Jumper Setting ..................................................................................8

2.5 Headers & Connectors.....................................................................9

Chapter 3: UEFI BIOS & Software ........................ 14

3.1 UEFI BIOS Setup ............................................................................ 14

3.2 BIOS Update.................................................................................... 14

3.3 Software............................................................................................18

Chapter 4: Useful Help ......................................... 21

4.1 Driver Installation.............................................................................23

4.2 Extra Information............................................................................. 24

4.3 AMI BIOS Beep Code.....................................................................25

4.4 Troubleshooting...............................................................................25

Appendix: SPEC In Other Languages .................... 26

Arabic.....................................................................................................................26

French ...................................................................................................................27

German .................................................................................................................28

Italian .....................................................................................................................29

Japanese...............................................................................................................30

Polish.....................................................................................................................31

Portuguese ...........................................................................................................32

Russian .................................................................................................................33

Spanish.................................................................................................................. 34

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

1

CHAPTER 1: INTRODUCTION

1.1 Before You Start

Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:

 Prepare a dry and stable working environment with sufficient

lighting.

 Always disconnect the computer from power outlet before

operation.

 Before you take the motherboard out from anti-static bag,

ground yourself properly by touching any safely grounded
appliance, or use grounded wrist strap to remove the static
charge.

 Avoid touching the components on motherboard or the rear

side of the board unless necessary. Hold the board on the
edge, do not try to bend or flex the board.

 Do not leave any unfastened small parts inside the case after

installation. Loose parts will cause short circuits which may
damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid air and water.

 The operating temperatures of the computer should be 0 to

45 degrees Celsius.

 To avoid injury, be careful of:

Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit

1.2 Package Checklist

; Serial ATA Cable x2
; Rear I/O Panel for ATX Case x1
; Installation Guide x1
; Fully Setup Driver DVD x1

Note: The package contents may be different due to the sales region or models in which it was sold.
For more information about the standard package in your region, please contact your dealer or sales
representative.

Motherboard Manual

2

1.3 Motherboard Specifications

Specifications

CPU Support

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)
NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)
NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)
NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)

Chipset INTEL NM70

Memory

Supports Dual Channel DDR3 1066/ 1333 (NM70I-847 & NM70I-807)
Supports Dual Channel DDR3 1333/ 1600 (NM70I-1007U & NM70I-1037U)
2 x DDR3 DIMM Memory Slot, Max. Supports up to 16 GB Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 module
* Please refer to www.biostar.com.tw

for Memory support list.

Storage

1x SATA 6Gb/s Connector, 3x SATA 3Gb/s Connector,

Supports Native IDE, AHCI Mode
LAN Realtek RTL 8111F, 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
Audio Codec ALC662, 5.1 Channels, High Definition Audio
USB 8x USB 2.0 port (4 on rear I/Os and 4 via internal headers)
Expansion Slots 1x PCIe 2.0 x16 Slot (x8)

Rear I/Os

1x PS/2 Mouse

1x PS/2 Keyboard

1x HDMI Port

1x VGA Port

1x LAN port

4x USB 2.0 Port

3x Audio Jack

Internal I/Os

1x SATA 6.0Gb/s Connector

3x SATA 3.0Gb/s Connector

2x USB 2.0 Header (each header supports 2 USB 2.0 ports)

1x 4-Pin Power Connector

1x 24-Pin Power Connector

1x CPU Fan Connector

1x System Fan Connector

1x Front Panel Header

1x Front Audio Header

1x Clear CMOS Header

1x Printer Port Header

1x Serial Port Header

1x S/PDIF out Connector
Form Factor mini-ITX Form Factor, 170 mm x 170 mm

OS Support

Windows XP / Vista / 7 / 8

Biostar reserves the right to add or remove support for any OS with or without notice.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

3

1.4 Central Processing Unit (CPU)

The motherboard is equipped with an onboard Intel processor and a CPU cooler.

Model: Onboard Intel CPU:

NM70I-847 Intel® Celeron® Processor 847 (Dual Core 1.1GHz, Sandy Bridge)

NM70I-807 Intel® Celeron® Processor 807 (Single Core 1.5GHz, Sandy Bridge)

NM70I-1007U Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz, Ivy Bridge)

NM70I-1037U Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz, Ivy Bridge)

1.5 Rear Panel Connectors

Note 1: Since the audio chip supports High Definition Audio Specification, the function of

each audio jack can be defined by software. The input / output function of each audio jack
listed above represents the default setting. However, when connecting external
microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.

Note 2: Maximum resolution:
VGA: 2048 x 1536 @75Hz
HDMI: 1920 x 1200 @60Hz

Motherboard Manual

4

1.6 Motherboard Layout

Note: ■ represents the 1st pin.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

5

CHAPTER 2: HARDWARE INSTALLATION

2.1 Connect Cooling Fans

These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

Pin Assignment

1 Ground
2 +12V
3

FAN RPM rate sense

SYS_FAN1: System Fan Header

Pin Assignment

1 Ground
2 +12V
3

FAN RPM rate sense

Note: CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When
connecting with wires onto connectors, please note that the red wire is the positive and
should be connected to pin#2, and the black wire is Ground and should be connected to
GND.

Motherboard Manual

6

2.2 Install System Memory

A. DDR3 Modules

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM

on the slot such that the notch on the DIMM matches the break on the slot.

Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap

back in place and the DIMM is properly seated.

Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

B. Memory Capacity

DIMM Socket Location

DDR3 Module

Total Memory Size

DDR3_A1 512MB/1GB/2GB/4GB/8GB

DDR3_B1 512MB/1GB/2GB/4GB/8GB

Max is 16GB.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

7

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR3_A1 DDR3_B1

Disabled O X

Disabled X O

Enabled O O

(O means memory installed, X means memory not installed.)

Note: The DRAM bus width of the memory module must be the same (x8 or x16)

2.3 Expansion Slots

PEX16_1: PCI-Express Gen2 x8 Slot

- PCI-Express 2.0 compliant.

- Data transfer bandwidth up to 4GB/s per direction; 8GB/s in total.

Install an Expansion Card

You can install your expansion card by following steps:

1. Read the related expansion card's instruction document before
install the expansion card into the computer.

2. Remove your computer's chassis cover, screws and slot bracket
from the computer.

3. Place a card in the expansion slot and press down on the card until it
is completely seated in the slot.

4. Secure the card’s metal bracket to the chassis back panel with a
screw.

5. Replace your computer's chassis cover.

6. Power on the computer, if necessary, change BIOS settings for the
expansion card.

7. Install related driver for the expansion card.

Motherboard Manual

8

2.4 Jumper Setting

The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is “close”, if not, that means the jumper is “open”.

Pin opened Pin closed Pin1-2 closed

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.

31

Pin 1-2 Close:

Normal Operation (default).

31

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Load Optimal Defaults and save settings in CMOS.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

9

2.5 Headers & Connectors

ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX
power supply.

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9 Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V

ATXPWR2: ATX Power Source Connector

This connector will provide +12V to CPU power circuit.

Pin Assignment

1 +12V
2 +12V
3 Ground
4 Ground

Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.

Note2: Insufficient power supplied to the system may result in instability or the
peripherals not functioning properly. Use of a PSU with a higher power output is
recommended when configuring a system with more power-consuming devices.

Motherboard Manual

10

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.

Pin Assignment Function Pin Assignment Function

1 +5V 9 N/A
2N/A 10N/A

N/A

3 N/A 11 N/A N/A
4 Speaker

Speaker

Connector

12 Power LED (+)
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)

Hard drive LED

14 Power LED (-)

Power LED

7 Ground 15 Power button
8 Reset control

Reset button

16 Ground

Power-on button

SATA1/2/3/4: Serial ATA Connectors

These connectors connect to SATA hard disk drives via SATA cables.

 SATA1: Supporting SATA3, up to 6 Gb/s data transfer rate.
 SATA2/3/4: Supporting SATA2, up to 3 Gb/s data transfer rate.

Pin Assignment

1 Ground
2 TX+
3 TX­4 Ground
5 RX­6 RX+
7 Ground

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

11

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.

Pin Assignment

1 +5V (fused)
2 +5V (fused)
3 USB­4 USB­5 USB+
6 USB+
7 Ground
8 Ground
9 NC
10 Key

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.

HD Audio AC’97

Pin Assignment Pin Assignment

1 Mic Left in 1 Mic In

2 Ground 2 Ground

3 Mic Right in 3 Mic Power

4 GPIO 4 Audio Power

5 Right line in 5 RT Line Out

6 Jack Sense 6 RT Line Out

7 Front Sense 7 Reserved

8 Key 8 Key

9 Left line in 9 LFT Line Out

10 Jack Sense 10 LFT Line Out

Note1: It is recommended that you connect a high-definition front panel audio module to
this connector to avail of the motherboard's high definition audio capability.

Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an
AC'97 front audio output cable. The function can be found via O.S. Audio Utility.

Motherboard Manual

12

JSPDIFOUT1: Digital Audio-out Connector

The JSPDIFOUT1 is for connecting the PCI bracket SPDIF output.

Pin Assignment

1 +5V
2 SPDIF_OUT
3 Ground

J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin Assignment

1 Carrier detect
2 Received data
3 Transmitted data
4 Data terminal ready
5Signal ground
6 Data set read

y

7 Request to send
8 Clear to send
9 Ring indicator

10 NC

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

13

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy

9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key

Motherboard Manual

14

CHAPTER 3: UEFI BIOS & SOFTWARE

3.1 UEFI BIOS Setup

z For better system performance, the UEFI BIOS firmware is being

continuously updated. The UEFI BIOS information described below in this
manual is for your reference only and the actual UEFI BIOS information and
settings on board may be different from this manual

z For further information of setting up the UEFI BIOS, please refer to the UEFI

BIOS Manual in the Setup DVD.

3.2 BIOS Update

z BIOSTAR BIOS Flasher: Using this utility, the BIOS can be updated from a

file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM.

z BIOSTAR BIOS Update Utility: It enables automated updating while in the

Windows environment. Using this utility, the BIOS can be updated from a file
on a hard disk, a USB drive (a flash drive or a USB hard drive), or a
CD-ROM, or from the file location on the Web.

BIOSTAR BIOS Flasher

BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple
way to update your BIOS via USB pen drive.

Note1: This utility only allows storage device with FAT32/16 format and single partition.

Note2: Shutting down or resetting the system while updating the BIOS will lead to system boot

failure.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen,
the BIOS-FLASHER utility pops
out. Choose [fs0] to search for the
BIOS file.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

15

6. Select the proper BIOS file, and a

message asking if you are sure to
flash the BIOS file. Click Yes to
start updating BIOS.

7. A dialog pops out after BIOS flash

is completed, asking you to restart
the system. Press the [Y] key to
restart system.

8. While the system boots up and the full screen logo shows up, press <DEL> key to
enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

BIOS Update Utility (through the Internet)

1. Installing BIOS Update Utility from the DVD Driver.

2. Please make sure the system is connected to the internet before using this
function.

3. Launch BIOS Update Utility and

click the Online Update button on
the main screen.

Motherboard Manual

16

4. An open dialog will show up to
request your agreement to start the
BIOS update. Click Yes to start the
online update procedure.

5. If there is a new BIOS version, the
utility will ask you to download it.
Click Yes to proceed.

6. After the download is completed,
you will be asked to program
(update) the BIOS or not. Click Yes
to proceed.

7. After the updating process is
finished, you will be asked you to
reboot the system. Click OK to
reboot.

8. While the system boots up and the full screen logo shows up, press <DEL> key
to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

BIOS Update Utility (through a BIOS file)

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from http://www.biostar.com.tw/

3. Launch BIOS Update Utility and

click the Update BIOS button on
the main screen.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

17

4. A warning message will show up
to request your agreement to start
the BIOS update. Click OK to start
the update procedure.

5. Choose the location for your BIOS
file in the system. Please select
the proper BIOS file, and then
click on Open. It will take several
minutes, please be patient.

6. After the BIOS Update process is
finished, click on OK to reboot the
system.

7. While the system boots up and the full screen logo shows up, press <DEL> key
to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.

Backup BIOS

Click the Backup BIOS button on
the main screen for the backup of
BIOS, and select a proper location
for your backup BIOS file in the
system, and click Save.

Motherboard Manual

18

3.3 Software

Installing Software

1. Insert the Setup DVD to the optical drive. The driver installation program would
appear if the Autorun function has been enabled.

2. Select Software Installation, and then click on the respective software title.

3. Follow the on-screen instructions to complete the installation.

Note1: All the information and content about following software are subject to be changed without
notice. For better performance, the software is being continuously updated.

Note2: The information and pictures described below are for your reference only. The actual
information and settings on board may be slightly different from this manual.

Launching Software

After the installation process is completed, you will see the software icon showing on
the desktop. Double-click the icon to launch it.

eHot-Line

eHot-Line is a convenient utility that helps you to contact with our Tech-Support
system. This utility will collect the system information which is useful for analyzing the
problem you may have encountered, and then send these information to our
tech-support department to help you fix the problem.

Note: Before you use this utility, please set Outlook Express as your default e-mail client
application program.

This block will show
th e info rmat ion w hich
would be collected in
the mail.

Pro vid e the e- mail
address that you would
like to send the copy to.

Pro vid e the na me of
the power supply
manufacturer and the
model no.

Send the mail out.

Save these infor mation to a .txt fil

e

Exit this dialog.

Select your area or
the area close to you.

*

Pro vid e the na me of
the memory module
manufacturer.

*

Describe condition
of your system.

*

*

represent s important
in forma tio n that you
must provide. Without
this information, you may
not be able to send out
the mail.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

19

After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you will see
a saving dialog appears asking you to enter file name.

Enter the file name and then click
“Save”. Your system information will be
saved to a .txt file.

Open the saved .txt file, you will see
your system information including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in the
sent mail.

Note1: We will not share customer’s data with any other third parties, so please feel free to provide
your system information while using eHot-Line service.

Note2: If you are not using Outlook Express as your default e-mail client application, you may need
to save the system information to a .txt file and send the file to our tech support with other e-mail
application. Go to the following website http://www.biostar.com.tw/app/en/about/contact.php for
getting our contact information.

Motherboard Manual

20

BIOScreen Utility

This utility allows you to personalize your boot logo easily. You can choose BMP as
your boot logo so as to customize your computer.

Please follow the step-by-step instructions below to update boot logo:

z Load Image：Choose the picture as the boot logo.

z Transform：Transform the picture for BIOS and preview the result.

z

Update Bios：Write the picture to BIOS Memory to complete the update.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

21

Rapid Start Technology

Intel® Rapid Start technology enables your system to get up and running faster from
even the deepest sleep, saving time and power consumption. Feel secure knowing that
your system will still resume to working conditions in the event of unexpected power
loss while in sleep mode.

System Requirement:

z An Intel® SATA SSD (SATA Gen2 or Gen3. Preferably Gen3, and 80 GB or

larger)

z Windows 7 and Windows 8

Note1: Please visit below webpage for more details about operating systems supporting

http://www.intel.com/p/en_US/support

Installing Intel® SBA:

Step 1: BIOS Setting

1-1 Go to [Advanced Menu] > [ACPI Settings], and set [ACPI Sleep State] to S3

(Suspend to RAM)
1-2 Go to [Advanced Menu] > [SATA Configuration], and set [SATA Mode
Selection] to AHCI

1-3 Go to [Advanced Menu] and set [Intel(R) Rapid Start Technology] to Enabled

1-4 Save your changes, and then exit the BIOS Setup.

Step 2: Operating System Installation

Step 3: Installing Intel® Rapid Start Application

3-1 Insert the setup Driver DVD into your optical drive. Click “Intel Rapid Start
Technology” to launch the program.
3-2 Below window will pop-out, then click “Create Disk” to star disk partition. After
disk partition finished, please click “OK” then system will reboot automatically.

Motherboard Manual

22

3-3 After rebooting, the system will setup Intel® Rapid Start Technology
automatically. We recommend you restart the system after this installation is
complete,

Step 4: Configuring Intel® Rapid Start Application

Launch the Intel® Rapid Start Technology Manager application from [Start] > [All
Programs] > [Intel] or click the icon in the notification area.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

23

CHAPTER 4: USEFUL HELP

4.1 Driver Installation

After you installed your operating system, please insert the Fully Setup Driver DVD
into your optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note: If this window didn’t show up after you insert the Driver DVD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the
compatible driver for your motherboard and operating system. Click on each device
driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the
software available for your system, click on each software title to launch the
installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver DVD. Click
on the Manual icon to browse for available manual.

Note: You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from http://get.adobe.com/reader/

Motherboard Manual

24

4.2 Extra Information

CPU Overheated

If the system shutdown automatically after power on system for seconds, that means
the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid
a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

25

4.3 AMI BIOS Beep Code

Boot Block Beep Codes

Number of Beeps Description

Continuing Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps Description

1 Success booting.
8 Display memory error (system video adapter)

4.4 Troubleshooting

Probable Solution

1. There is no power in the system.
Power LED does not shine; the fan
of the power supply does not work

2. Indicator light on keyboard does
not shine.

1. Make sure power cable is securely
plugged in.

2. Replace cable.

3. Contact technical support.

System is inoperative. Keyboard lights
are on, power indicator lights are lit,
and hard drives are running.

Using even pressure on both ends of the
DIMM, press down firmly until the module
snaps into place.

System does not boot from a hard disk
drive, but can be booted from optical
drive.

1. Check cable running from disk to disk
controller board. Make sure both ends
are securely plugged in; check the
drive type in the standard CMOS
setup.

2. Backing up the hard drive is extremely
important. All hard disks are capable of
breaking down at any time.

System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.

1. Back up data and applications files.

2. Reformat the hard drive. Re-install

applications and data using backup
disks.

Screen message shows “Invalid
Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure
correct information is in setup.

System cannot boot after user installs a
second hard drive.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select

correct drive types. Call the drive
manufacturers for compatibility with
other drives.

Motherboard Manual

26

APPENDIX: SPEC IN OTHER LANGUAGES

Arabic

تﺎﻔﺻاﻮﻤﻟا

ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ةﺪﻋﺎﻗ

ﺔﻳﺰآﺮﻤﻟا

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)

NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)
NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)
NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)

ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻣ Intel NM70

ةﺮآاﺬﻟا

ﻢﻋﺪﺗ ةﺎﻨﻗ ﺔﺟودﺰﻣ يد .يد .را. (NM70I-847 & NM70I-807) DDR3 1066/1333
ﻢﻋﺪﺗ ةﺎﻨﻗ ﺔﺟودﺰﻣ يد .يد .را. (NM70I-1007U & NM70I-1037U) DDR3 1600/1333

2x يد .يد .را .DDR3 ﺰﻤﻟا ةﺮآاﺬﻟا تﺎﺤﺘﻓ ﺔﺟودDIMM ﻰﺼﻗأ ﺪﺤآ ﻞﻤﺤﺘﺗ ،16ةﺮآاذ ﺖﻳﺎﺑﺎﺠﻴﺟ

ﺔﺟودﺰﻣ ﺔﺤﺘﻓ ﻞآ DIMM نود ﻞﻤﺤﺘﺗ ECC 512ﺠﻴﻣ ﺖﻳﺎﺑ ﺎ/1/2/4/8يد ﺖﻳﺎﺑﺎﺠﻴﺟ .يد . راDDR3

*ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳwww.biostar.com.tw ةﺮآاﺬﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ.

ﻦﻳﺰﺨﺘﻟا

ﺔﻠﺻوx1 ﺎﺗﺎﺳ SATA 6 ﺖﻳﺎﺑ ﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻟا, ﻠﺻو ﺔ3x ﺎﺗﺎﺳ SATA 3 ﺖﻳﺎﺑ ﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻟا

ﺪﻳار ﻞﻤﺤﺘﺗمﻷا IDE/ AHCI

ﺔﻴﻠﺤﻣ ﺔﻜﺒﺷLAN

ل تر ﻚﻴﺘﻟﺎﻴﻳرRTL 8111 F REALTEK

10 / 100 / 1000 ﺖﻳﺎﺑﺎﺠﻴﻣ / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا /ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا

ﻲﺗﻮﺼﻟا ﺰﻴﻣﺮﺘﻟا

ALC662

5.1ﺔﻗﺪﻟا ﺔﻴﻟﺎﻋ تاﻮﻨﻗ

ﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ مﺎﻋ ﻞUSB ﺬﻓﺎﻨﻣ8 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ USB 2.0 ) 4 و ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 4 ﻲﻠﺧاﺪﻟا عزﻮﻤﻟا لﻼﺧ ﻦﻣ(

ﻊﺳﻮﺘﻟا تﺎﺤﺘﻓ 1 x ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ PCIe 2.0x 16)x8(

ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا

1 x PS/2 ةرﺎﻔﻟا
1 x PS/2ﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ ﺮﺗﻮ

دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x HDMI حﻮﺿﻮﻟا ﻲﻟﺎﻌﻟا دﺪﻌﺘﻣ ﻂﻴﺳو

دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ1 x ﻲﺋﺮﻤﻟا ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ VGA

دﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ1 x ﺔﻴﻠﺤﻤﻟا ﺔﻜﺒﺸﻟا LAN

دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ4 x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ USB 2.0
دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ3 xتﻮﺼﻠﻟ كﺎﺟ

ﻤﻟاﺔﻴﻠﺧاﺪﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪ

ﺔﻠﺻو1 x SATA 6 ﺖﻳﺎﺑﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻟا
ﺔﻠﺻو3 x SATA 3 ﺖﻳﺎﺑﺎﺠﻴﺟ /ﺔﻴﻧﺎﺜﻟا
عزﻮﻣ2x مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ USB 2.0 ) مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ ﻦﻴﺘﺤﺘﻓ ﻞﻤﺤﺘﻳ عزﻮﻣ ﻞآUSB 2.0(

ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو 1 x 4 ﺲﻴﺑﺎﺑد

ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻو1x 24 سﻮﺑد

ﺔﻠﺻو1 x ﺮﺒﺗ ﺔﺣوﺮﻣﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺪﻳ

ﺔﻠﺻو1x ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ

عزﻮﻣ1 x ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا
عزﻮﻣ1x ﻲﻣﺎﻣﻷا تﻮﺼﻟا
عزﻮﻣ1x ﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ

عزﻮﻣ 1x ﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ
عزﻮﻣ1x ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ
ﺔﻠﺻو1x ﺔﻴﺟرﺎﺧS/PDIF ﺔﻴﻤﻗﺮﻟا ﺔﻬﺟاﻮﻟا ﺲﺒﻴﻠﻴﻓ ﻲﻧﻮﺳ

ﻞﻜﺸﻟا ﻞﻣﺎﻋ ﻞﻣﺎﻋ ﺔﻣﺪﻘﺘﻤﻟا ﺎﻴﺟﻮﻟﻮﻨﻜﺘﻟا دﺪﻣ ﻞﻜﺷmini-ITX ، 170 ﻢﻣ x 170 ﻢﻣ

ﺔﻣﻮﻋﺪﻤﻟا ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻧأ

ﻲﺑ ﺲآإ زوﺪﻨﻳوwindows xp / ﻨﻳو ﺎﺘﺴﻴﻓ زوﺪ / زوﺪﻨﻳو7 8 /

رﺎﺘﺳﻮﻴﺑBIOSTARرﺎﻈﻧأ نوﺪﺑ وأ ﻊﻣ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻟا ﺔﻟزأ وأ ﺔﻓﺎﺿإ ﻖﺤﺑ ﻆﻔﺘﺤﺗ .

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

27

French

Spécifications

Support Unité
Centrale

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)
NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)
NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)
NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)

Jeu de puces INTEL NM70

Mémoire

Supporte mémoire DDR3 double canal 1066/ 1333 (NM70I-847 & NM70I-807)
Supporte mémoire DDR3 double canal 1333/ 1600 (NM70I-1007U & NM70I-1037U)
Banc de mémoire 2 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 16 GB
Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8 GB
* Veuillez vous reporter à

www.biostar.com.tw pour la liste des soutien de la mémoire.

Stockage

Connecteur 1 x SATA 6Gb/s, Connecteur 3 x SATA 3Gb/s
Supporte système indigène IDE & AHCI mode

Réseau local

Realtek RTL 8111F
10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat /

bidirectionnelle simultanée
Codec audio ALC662, Canaux 5.1, écoute audio de haute définition
USB Port 8x USB 2.0 (4 sur les I/O arrières et 4 en interne)
Connecteur
d’extension

1x PCIe 2.0 x16 Fente (x8)

I/O arrirèes

1x PS/2 Clavier

1x PS/2 Souris

1x Port HDMI

1x Port VGA

1x port LAN

4x Port USB 2.0

3x entrées audio

I/O en interne

1x Connecteur SATA 6.0Gb/s

3x Connecteur SATA 3.0Gb/s

2x embases USB 2.0 (chaque embase supporte 2 Ports USB 2.0)

1x 4-Broche de carte

1x 24-Broche de carte

1x Connecteur ventilateur unité centrale

1x Connecteur ventilateur système

1x Fiche panneau avant

1x Fiche audio avant

1x Fiche mémoire CMOS vide

1x Embase port imprimante

1x Embase port série

1x Connecteur sortie S/PDIF
Facteur
d'encombrement

Facteur d'encombrement mini-ITX, 170 mm x 170 mm

Support SE

Windows XP / Vista / 7 / 8

Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans

préavis.

Motherboard Manual

28

German

Spezifikationen

CPU-Unterstützung

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)

NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)

NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)

NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)
Chipset INTEL NM70

Festplattenspeicher

Unterstützt zweikanaliges DDR3 1066/ 1333 (NM70I-847 & NM70I-807)

Unterstützt zweikanaliges DDR3 1333/ 1600 (NM70I-1007U & NM70I-1037U)

2 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 16 GB-Speicher

Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3-Module

* Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung Liste.

Arbeitsspeicher

1x SATA 6Gb-Verbindung, 3x SATA 3Gb-Verbindung

Unterstützt Ureinwohner IDE & AHCI Modus

LAN

Realtek RTL 8111F

10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
Audio-Codec ALC662, 5.1 Kanäle, HD-Audio
USB 8x USB 2.0-Port (4 hintere I/Os und 4 via interne Header)

Erweiterungsanschl
üsse

1x PCIe 2.0 x16-Slot (x8)

Hintere I/Os

1x PS/2-Maus

1x PS/2-Keyboard

1x HDMI-Port

1x VGA-Port

1x LAN-Port

4x USB 2.0-Port

3x Audio Jack

Interne I/Os

1x SATA 6.0Gb/s-Verbinung

3x SATA 3.0Gb/s-Verbinung

2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports)

1x 4-Pin-Stromverbindung

1x 24-Pin-Stromverbindung

1x CPU-Ventilatorverbindung

1x System-Ventilatorverbindung

1x Header für Frontpanel

1x Header für Frontaudio

1x Header für klares CMOS

1x Header für Druckerport

1x Serieller Port-Header

1x S/PDI-Auswurfsverbindung
Formfaktor mini-ITX Formfaktor, 170 mm x 170 mm

OS-Unterstützung

Windows XP / Vista / 7 / 8

Biostar reserves the right to add or remove support for any OS with or without notice.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

29

Italian

Specificazioni

Supporto
processore

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)

NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)

NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)

NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)

Tipo scheda INTEL NM70

Memoria

Supporta DDR3 1066/ 1333 Doppio Canale (NM70I-847 & NM70I-807)
Supporta DDR3 1333/ 1600 Doppio Canale (NM70I-1007U & NM70I-1037U)
2 x DDR3 DIMM Slot di Memoria Supporta fino a 16 GB Memoria
Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 moduli
* Si prega di consultare

www.biostar.com.tw per la lista di supporto del memoria.

Memorizzazione

Connettore 1x SATA 6Gb/s, Connettore 3x SATA 3Gb/s
Supporta nativo IDE & AHCI modo

Catena

Realtek RTL 8111F
10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo

Codec Audio

ALC662

Canali Audio di Alta Definizione 5.1
USB Slot 8x USB 2.0 (4 nei ingressi/ uscite posteriore e 4 da distributori interni)
Slot di espansione Slot 1x PCIe 2.0 x16 (x8)

Ingressi/ Uscite
Posteriore

Mouse 1x PS/2

Tastiera 1x PS/2

Slot 1x HDMI

Slot 1x VGA

Slot 1x LAN

Slot 4x USB 2.0

Jack audio 3x

Ingressi/ Uscite
Interni

Connettore 1x SATA 6.0Gb/s

Connettore 3x SATA 3.0Gb/s

Distributore 2x USB 2.0(ogni distributore supporta 2 slot USB 2.0)

Connettore con 4 pin x1

Connettore con 24 pin x1

Connettore Ventilatore processore x1

Connettore Ventilatore Sistema x1

Distributore Pannello Frontale x1

Distributore Audio Frontale x1

Distributore CMOS Diretto x1

Distributore Slot Stampante x1

Distributore Slot Serie x1

Connettore esterno S/PDIF x1
Fattore di Forma Fattore di Forma mini-ITX, 170 mm x 170 mm

Supporto SO

Windows XP / Vista / 7 / 8

Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO con o senza
preavviso

.

Motherboard Manual

30

Japanese

仕様

CPU サポート

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)
NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)
NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)
NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)

チップセット INTEL NM70

メモリ

デュアルチャンネル DDR3 1066/ 1333 をサポート(NM70I-847 & NM70I-807)
デュアルチャンネル DDR3 1333/ 1600 をサポート(NM70I-1007U & NM70I-1037U)
2 x DDR3 DIMM メモリ スロット、 最大 16GB メモリまでサポート
各 DIMM は、 非-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 モジュールをサポートしています
*サポートされているメモリのリストについては、

www.biostar.com.twを参照してください。

保存スペース

1x SATA 6Gb/s コネクタ, 3x SATA 3Gb/s コネクタ
ネイティブ IDE & AHCI モード のサポート

LAN

Realtek RTL 8111F
10/ 100/ 1000 Mb/s オートネゴーシエーション、半/全 二重通信

オーディオ コーデック ALC662

5.1 チャンネル, ハイ デフィニション オーディオ

USB 8x USB 2.0 ポート (後部 I/O に4つ 及び 内蔵ヘッダー経由に4つ)

拡張スロット 1x PCIe 2.0 x16 スロット (x8)

後部 I/O

1x PS/2 キーボード
1x PS/2 マウス
1x HDMI ポート
1x VGA ポート
1x LAN ポート
4x USB 2.0 ポート
3x オーディオ ジャック

内蔵 I/O

1x SATA 6.0Gb/s コネクタ
3x SATA 3.0Gb/s コネクタ
2x USB 2.0 ヘッダー (各ヘッダーは、2つの USB 2.0 ポートをサポートしています)
1x 4-Pin パワー コネクタ
1x 24-Pin パワー コネクタ
1x CPU ファン コネクタ
1x システム ファン コネクタ
1x フロント パネル ヘッダー
1x フロント オーディオ ヘッダー
1x クリア CMOS ヘッダー
1x プリンター ポート ヘッダー
1x シリアル ポート ヘッダー
1x S/PDIF アウト コネクタ

フォーム ファクタ mini-ITX フォーム ファクタ、170 mm x 170 mm

サポート OS

Windows XP / Vista / 7 / 8
Biostar には、通知なしでサポート OS を変更する権限があります。

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

31

Polish

Specyfikacje techniczne

Obsługa procesora

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)

NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)

NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)

NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)

Rodzaj płyty INTEL NM70

Pamięć

Pojedynczy pamięci DDR3 1066/ 1333 Dwukanałowa (NM70I-847 & NM70I-807)

Pojedynczy pamięci DDR3 1333/ 1600 Dwukanałowa (NM70I-1007U & NM70I-1037U)

2 x DDR3 DIMM Pamięć Gniazda procesora (Slot), Maksymalna wielkość pamięci 16 GB

Każdy DIMM obsługuje jeden moduł non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3

* Proszę sprawdzić listę obsługiwanych pamięć na stronie internetowej

www.biostar.com.tw

Przechowywanie Złącze 1x SATA 6Gb/s, Złącze 3x SATA 3Gb/s, Obsługa rodzimy IDE & AHCI tryb

LAN

Układ RTL 8111F

10/ 100/ 1000 Mb auto negocjacja, pojemność dupleks Połowe / Pełny

Codec Audio

ALC662

Kanały Audio wysokiej Definicji 5.1

USB 8 x złącza USB 2.0 (4 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty)
Złącza rozszerzeń złącza 1x PCIe 2.0 x16 (x8 Slot)

Tylne porty wejścia/
wyjścia

Myszka 1x PS/2

Klawiatura 1x PS/2

Port 1x HDMI (gniazdo)

Port 1x VGA

Port 1x LAN

Porty 4x USB 2.0

Porty audio 3x

Wewnętrzne porty
wejścia/ wyjścia

Złącza 1x SATA 6.0Gb/s

Złącza 3x SATA 3.0Gb/s

Złącza 2x USB 2.0 (każde złącze obsługuje dodatkowe 2 porty USB 2.0)

Złącza 4 pionowe x 1

Złącza 24 pionowe x 1

Złącze wentylatora CPU x 1

Złącze wentylatora obudowy x 1

Złącze przedniego panelu x1

Złącze audio przedniego panelu x1

Złącze bezpośrednie CMOS x1

Złącze port drukarki x1

Port szeregowy x1

Port zewnętrzny S/PDIF x1

Obudowa Obudowa mini-ITX, 170 mm x 170 mm

Obsługa OS

Windows XP / Vista / 7 / 8
Biostar zastrzega sobie prawo do dodania lub wycofania obsługi dla OS, z
wypowiedzeniem lub bez wypowiedzenia.

Motherboard Manual

32

Portuguese

Especificações

Suporte
Processador

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)

NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)

NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)

NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)
Tipo Placa Mãe INTEL NM70

Memória

Suporta DDR3 1066/ 1333 Canal Duplo (NM70I-847 & NM70I-807)

Suporta DDR3 1333/ 1600 Canal Duplo (NM70I-1007U & NM70I-1037U)

2 x DDR3 DIMM Slot de memória Suporta até 16 GB Memória

Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3 módulo

* Por favor consulte

www.biostar.com.tw para obter uma lista de suporte do memória.

Armazenamento Conector 1x SATA 6Gb/s, Conector 3x SATA 3Gb/s,Suporta nativo IDE & AHCI modo

LAN

Realtek RTL 8111F

10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio

Codec de Audio

ALC662

Canais de Áudio de Alta Definição 5.1
USB Porta 8x USB 2.0 (4 nas entradas/saídas traseiras e 4 pelos Dispositivos internos)

Slots de expansão Porta 1x PCIe 2.0 x16 (x8)

Entradas/Saídas
no painel traseiro

Mouse 1x PS/2

Teclado 1x PS/2

Porta 1x HDMI

Porta 1x VGA

Porta 1x LAN

Porta 4x USB 2.0

Soquete audio 3x

Conectores na
placa

Conector 1x SATA 6.0Gb/s

Conector 3x SATA 3.0Gb/s

Dispositivo 2x USB 2.0 (cada Dispositivo suporta 2 portas USB 2.0)

Conector de 4 pinos x1

Conector de 24 pinos x1

Conector de Ventoinha processador x1

Conector de Ventoinha Sistema x1

Dispositivo Painel Frontal x1

Dispositivo de Audio Frontal x1

Dispositivo CMOS Direct x1

Dispositivo Porta Impressora x1

Dispositivo Porta Série x1

Conector Externo S/PDIF x1
Fator de Fôrma Fator de Fôrma mini-ITX, 170 mm x 170 mm

Suporte OS

Windows XP / Vista / 7 / 8
Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou sem
notificação.

NM70I-847/NM70I-807/NM70I-1007U/NM70I-1037U

33

Russian

Спецификации

Поддержка
центрального
процессора

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)
NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)
NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)
NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)

Набор микросхем INTEL NM70

Память

Поддерживает двухканальный DDR3 1066/ 1333 (NM70I-847 & NM70I-807)
Поддерживает двухканальный DDR3 1333/ 1600 (NM70I-1007U & NM70I-1037U)
2 гнезда платы памяти DDR3 DIMM, максимальная память до 16 Гб
Каждый модуль DIMM поддерживает модуль не-ECC 512 Мб/ 1/ 2/ 4/ 8 Гб DDR3

* Перечень поддержки памяти смотрите на

www.biostar.com.tw.

Накопитель

Соединитель 1x SATA 6 Гб/с, Соединитель 3x SAT A 3 Гб/с, Поддерживает родной IDE
& AHCI режим

Локальная сеть

Realtek RTL 8111F

Автосогласование 10/ 100/ 1000 Мб/с, работает в полно/полудуплексном режиме

Аудиокодек

ALC662
Каналы 5.1, высококачественное аудио

USB 8 порта USB 2.0 (4 сзади ввода-вывода и 4 через внутренние контакты)

Гнезда расшир. 1x PCIe 2.0 x16 гнездо (x8)

Задняя плата
ввода-вывода

1 мышь PS/2
1 клавиатура PS/2
1 порт HDMI
1 порт VGA
1 порт локальной сети
4 порта USB 2.0
3 гнезд для подключения наушников

Внутр. Плата
ввода-вывода

Соединитель 1x SATA 6 Гб/с
Соединитель 3x SATA 3 Гб/с

2 контакта USB 2.0 (каждый контакт поддерживает 2 порта USB 2.0)
1 4-выводный разъем питания
1 24-выводный разъем питания
1 разъем вентилятора ЦП
1 разъема вентилятора системы
1 контакт передней панели
1 контакт передней аудиопанели
1 контакт микросхемы Clear CMOS
1 контакт порта принтера
1 контакт последовательного порта
1 соединитель S/PDIF-Out

Конструктив Форм-фактор mini-ITX, 170 мм x 170 мм

Поддержка ОС

Windows XP / Vista / 7 / 8
Biostar оставляет за собой право добавлять или удалять поддержку любой ОС, с
уведомлением или без.

Motherboard Manual

34

Spanish

Especificaciones

Compatibilidad con
el procesador

NM70I-847: Intel® Celeron® Processor 847 (Dual Core 1.1GHz)

NM70I-807: Intel® Celeron® Processor 807 (Single Core 1.5GHz)

NM70I-1007U: Intel® Celeron® Processor 1007U (Dual Core 1.5 GHz)

NM70I-1037U: Intel® Celeron® Processor 1037U (Dual Core 1.8 GHz)
Tipo de Placa INTEL NM70

Memoria

Soporta DDR3 1066/ 1333 Doble Canal (NM70I-847 & NM70I-807)

Soporta DDR3 1333/ 1600 Doble Canal (NM70I-1007U & NM70I-1037U)

2x DDR3 DIMM Ranura de memoria Soporta hasta 16 GB Memoria

Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8 GB DDR3

*Por favor consultar con

www.biostar.com.tw para la lista de compatibilidad con el

memoria.
Almacenamiento
de información

Conector 1x SATA 6Gb/s, Conector 3x SATA 3Gb/s, Soporta nativo IDE & AHCI modo

LAN

Realtek RTL 8111F

10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo
Códec Audio ALC662, Canales Audio de Alta Definición 5.1

USB

Ranura 8x USB 2.0 (4 en las entradas/salidas posteriores y 4 por los distribuidores

internos)
Ranuras de
Extinción

Ranura 1x PCIe 2.0 x16 (x8)

Panel trasero de
E/S

Ratón 1x PS/2

Teclado 1x PS/2

Ranura 1x HDMI

Ranura 1x VGA

Ranura 1x LAN

Ranura 4x USB 2.0

Socket audio 3x

Conectores en
placa

Conector 1x SATA 6Gb’s

Conector 3x SATA 3Gb’s

Distribuidor 2x USB 2.0 (cada distribuidor soporta 2 ranuras USB 2.0)

Conector con 4 patillas x1

Conector con 24 patillas x1

Conector Ventilador procesador x1

Conector Ventilador Sistema x1

Distribuidor Panel Frontal x1

Distribuidor Audio Frontal x1

Distribuidor CMOS Directo x1

Distribuidor Ranura Impresora x1

Distribuidor Ranura Serie x1

Conector Externo S/PDIF x1
Factor de Forma Factor de Forma mini-ITX, 170 mm x 170 mm

Soporte OS

Windows XP / Vista / 7 / 8
Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin
notificación.

2013/06/21