How it Works
Biostar
Loading...
NF61S Micro 754
Owner's Manual
45 pgs1.77 Mb0

Biostar NF61S Micro 754 Owner's Manual

NF61S Micro 754 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with t he instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.
Table of Contents
Chapter 1: Introduction ........................................ 1
1.1 Before You Start ................................................................................ 1
1.2 Package Checklist............................................................................. 1
1.3 Motherboard Features...................................................................... 2
1.4 Rear Panel Connectors (Ver 6.x)..................................................... 4
1.5 Rear Panel Connectors (Ver 5.x)..................................................... 4
1.6 Motherboard Layout (Ver 6.x)........................................................ 5
1.7 Motherboard Layout (Ver 5.x) ........................................................ 6
Chapter 2: Hardware Installation........................... 7
2.1 Installing Central Processing Unit (CPU)....................................... 7
2.2 FAN Headers...................................................................................... 8
2.3 Installing System Memory ................................................................ 9
2.4 Connectors and Slots....................................................................... 10
Chapter 3: Headers & Jumpers Setup ................... 12
3.1 How to Setup Jumpers .................................................................... 12
3.2 Detail Settings.................................................................................. 12
Chapter 4: RAID Functions .................................. 19
4.1 Operation System............................................................................ 19
4.2 Raid Arrays...................................................................................... 19
4.3 How RAID Works............................................................................. 19
Chapter 5: Useful Help......................................... 21
5.1 Driver Installation Note.................................................................. 21
5.2 Award BIOS Beep Code .................................................................. 22
5.3 Extra Information............................................................................ 22
5.4 Troubleshooting............................................................................... 24
Appendencies: SPEC In Other Language .............. 26
German.................................................................................................................. 26
France .................................................................................................................... 28
Italian..................................................................................................................... 30
Spanish ................................................................................................................... 32
Portuguese ............................................................................................................ 34
Polish...................................................................................................................... 36
Russian ................................................................................................................... 38
Arabic..................................................................................................................... 40
Japanese ................................................................................................................ 42
CHAPTER 1: INTRODUCTION
NF61S Micro 754
1.1 B
EFORE YOU START
Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:
Prepare a dry and stable working environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water.
1.2 PACKAGE CHECKLIST
HDD Cable X 1 Serial ATA Cable X 1 User’s Manual X 1 Fully Setup Driver CD X 1 Rear I/O Panel for ATX Case X 1 USB 2.0 Cable X1 (optional) Serial ATA Power Cable X 1 (optional) FDD Cable X 1 (optional) Printer Port Cable X 1 (optional)
1
Motherboard Manual
1.3 MOTHERBOARD FEATURES
Ver 5.x Ver 6.x
Socket 754
CPU
FSB Supports up to 800MHz Bandwidth Supports up to 800MHz Bandwidth
Chipset MCP61S (GeForce 6100-405) MCP61S (GeForce 6100-405)
Super I/O
Main
Memory
Graphics
AMD Sempron / Athlon 64 processors
Supports Hyper Transport and Cool=n=Quiet
ITE 8712F
Prov ides the mos t co mmonly us ed legacy Super
I/O functionality.
Low Pin Count Interface
DIMM Slots x 2
Each DIMM supports 256/512MB & 1GB DDR
Max Memory Capicity 2GB
Sin g le Ch ann e l Mode DDR memo r y mo d ule
Supports DDR 400 / 333
Regis ter ed DIMM and ECC D IM M is n ot
supported
Int eg r at ed in MC P6 1S Ch ipset
Max S h ared V id eo Memory is 256 MB
Socket 754
AMD Sempron / Athlon 64 processors
Supports Hyper Transport and Cool=n=Quiet
ITE 8712F
Prov ides the mos t co mmonly used leg acy S upe r
I/O functionality.
Low Pin Count Interface
DIMM Slots x 2
Each DIMM supports 256/512MB & 1GB DDR
Max Memory Capicity 2GB
Sin g le Ch ann e l Mode DDR memo r y mo d ule
Supports DDR 400 / 333
Regis ter ed DIMM and ECC D IM M is n ot
supported
Int eg r at ed in MC P6 1S Ch ipset
Max S h ared V id eo Memory is 256 MB
IDE
SATA II
LAN
Sound
2
Int eg r ate d IDE Cont r o l le r
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
SATA Versio n 2. 0 s pecificat io n co mpl ian t.
Realtek 8201CL PHY
10 / 100 Mb/s Auto-Negotiation
ALC888
7.1 channels audio out
High-Definition Audio support
Int eg r ate d IDE Cont r o l le r
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
SATA Versio n 2. 0 s pecificat io n co mpl ian t.
Realtek 8201CL PHY
10 / 100 Mb/s Auto-Negotiation
ALC861VD
5.1 channels audio out
High-Definition Audio support
Ver 5.x Ver 6.x
PCI slot x2 PCI slot x2
Slots
On Board
Connector
Back Panel
I/O
Board Size 207 x 244 (mm) 207 x 244 (mm)
Special
Features
OS Support
PCI Express x 16 slot (x8 Speed) x1 PCI Express x 16 slot (x8 Speed) x1
PCI Express x 1 slot x1 PCI Express x 1 slot x1
Floppy connector x1 Floppy connector x1
IDE Conn ecto r x1 ID E Co nn ecto r x1
SATA2 Connector x2 SATA2 Connector x2
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
CD-in Connector x1 CD-in Connector x1
CPU Fan header x1 CPU Fan header x1
Sys tem Fan header x1 System Fan header x1
CMOS clear header x1 CMOS clear header x1
USB connector x 2 USB connector x2
Printer Port Connect or x1 Print er Po rt Connecto r x1
Chassis open header(Optional) x1 Chassis open header(Optional) x1
Power Connector (24pin) x1 Power Connector (24pin) x 1
Power Connector (4pin) x1 Power Connector (4pin) x1
PS/2 Keybo ard x1
PS/2 Mous e x1
Serial Port x1
VGA port x1
LAN port x1
USB Po rt x4
Audio Jack x6
NVIDIA nTunes
RAID 0 / 1 support
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS With or without notice.
PS/2 Keybo ard x1
PS/2 Mous e x1
Serial Port x1
VGA port x1
LAN port x1
USB Po rt x4
Audio Jack x3
NVIDIA nTunes
RAID 0 / 1 support
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS With or without notice.
NF61S Micro 754
3
Motherboard Manual
1.4 REAR PANEL CONNECTORS (VER 6.X)
PS/2 Mouse
PS/2 Keyboard
COM1 VGA
1.5 REAR PANEL CONNECTORS (VER 5.X)
PS/ 2 Mou se
LAN
Line In/ Surr ound
Line Out
Mic In 1/ Bass/ Center
USBX2USBX2
LA N
PS/2 Keyboard
4
COM 1 VGA
Center
Rear
Side
Line In
Line Out
Mic In
USBX2USBX2
1.6 MOTHERBOARD LAYOUT (VER 6.X)
NF61S Micro 754
JKBMS1
JCOM 1
JVGA1
JUSBV1
JUSB1
JUSBLAN1
JAUDIO1
JAUDIOF1
JCFAN1
JATXPWR1
PEX1_1
JATXPWR2
JNFAN1(Optional)
JDDR_OV<3V
Socket 754
CPU 1
DIMM1
DIMM2
IDE 1
MCP61S
JCI1(Optional)
LAN
Codec
JCDIN1
Note: represents the 1■
JPRNT1
PEX16_1
PCI1
PCI2
FDD1
st
pin.
SATA2 SATA1
BAT1
JCMOS1
JUSB2
BIOS
Super I/O
JSFAN1
JUSB3
JUSBV2
JPANEL1
5
Motherboard Manual
1.7 MOTHERBOARD LAYOUT (VER 5.X)
JKBMS1
JCOM 1
JVGA1
JUSBV1
JUSB1
JUSBLAN1
JAUDIO2
JAUDIOF1
JCFAN1
JATXPWR1
PEX1_1
JATXPWR2
JNFAN1(Optional)
JDDR_OV<3V
Socket 754
CPU 1
DIMM1
DIMM2
IDE 1
MCP61S
JCI1(Optional)
6
LAN
Codec
JCDIN1
Note: represents the 1■
JPRNT1
PEX16_1
PCI1
PCI2
FDD1
st
pin.
SATA2 SATA1
BAT1
JCMOS1
JUSB2
BIOS
Super I/O
JSFAN1
JUSB3
JUSBV2
JPANEL1
NF61S Micro 754
CHAPTER 2: HARDWARE INSTALLATION
2.1 I
NSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
90
A
Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point forwards this white triangle. The CPU will fit only in the correct orientation.
Step 3: Hold the CPU down firmly, and then close the lever to complete
the installation.
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
7
Motherboard Manual
2.2 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufact urer. Connect the fan cable to the connector while matching the black wire to pin#1.
JCFAN1: CPU Fan Header
JSFAN1: System Fan Header
JNFAN1: North Bridge Fan Header (Optional)
13
JCFAN1
JNFAN1
(Optional)
13
Pin Assignment
1 Ground 2 +12V 3
1
3
FAN RPM r at e sense
JSFAN1
Note:
The JCFAN1、JSFAN1 and JNFAN1 support 3-pin head connector. When connecting with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.
8
NF61S Micro 754
2.3 INSTALLING SYSTEM MEMORY
A. Memory Modules
DI MM1
DI MM2
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
B. Memory Capacity
DIMM Socket
Location
DIMM1 256MB/512MB/1024MB *1
DIMM2 256MB/512MB/1024MB *1
DDR Module Total Memory Size
Max me mory 2GB.
9
Motherboard Manual
2.4 CONNECTORS AND SLOTS
FDD1: Floppy Disk Connector
The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables.
2
133
34
IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
The IDE connector can connect a master and a slave drive, so you can connect up to two hard disk drives.
40
39
10
2
1
NF61S Micro 754
PEX1_1: PCI-Express x1 Slot
- PCI-Express 1.0a compliant.
- Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.
- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
- 2X bandwidth over the traditional PCI architecture.
PEX16_1: PCI-Express x16 Slot (x8 Speed)
- PCI-Express 1.0a compliant.
- Maximum theoretical realized bandwidth of 2GB/s simultaneously per
direction, for an aggregate of 4GB/s totally.
PEX1_1
PEX16_1
PCI1~PCI2: Peripheral Component Interconnect Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
11
Motherboard Manual
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 H
OW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.
Pin opened Pin closed Pin1-2 closed
3.2 DETAIL SETTINGS
JPANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button and speaker connection. It allows user to connect the PC case’s front panel switch functions.
E
D
P
W
R
_
L
f
f
n
/
O
S
L
P
9 1
S
P
O
-
+
+
K
16
8
-
+
T
S
R
D
L
E
H
12
Pin Assignment Function Pin Assignment Function
1 +5V 9 Sleep control 2 N/A 10 Ground 3 N/ A 11 N/A N/A 4 Speaker 5 HDD LED (+) 13 Power LED (+) 6 HDD LED (-) 7 Ground 15 Power button 8 Reset control
Speaker Connector
Hard drive LED
Reset button
12 Power LED (+)
14 Power LED (-)
16 Ground
Sleep button
Power LED
Power-on button
Loading...
+ 31 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use